Santa Cruz V10 I Greg Minnaar I Probuild I Downhill I Worldcup Bike I Dreambuild
Спорт
We regularly present the bikes of the World Cup Stars and grant an exclusive look behind the scenes of the teams' otherwise strictly closed doors. Subscribe to our channel and never miss a video.
For this Video we visited Greg Minnaar in Morzine at a training camp and were there to see how his mechanic does the regular service. After each training day the bike is taken apart. Watch the video and get an exclusive look at what is being done for Greg Minnaar to make his bike run perfectly. Even the bearings are opened and oiled for best smooth running.
Greg Minnaar is one of the most successful downhillers ever, in his career he became world champion 3 times, won the overall world cup 3 times, stood on the world cup podium 60 times. He is considered one of the smoothest and most meticulous downhill racers in the world, so he attaches great importance to a perfect bike.
Wir präsentieren regelmäßig die Räder der World Cup Stars und gewähren einen exklusiven Einblick hinter die Kulissen der sonst streng verschlossen Türen der Teams. Abonniere unseren Kanal und verpasse kein Video.
Für dieses Video besuchten wir Greg Minnaar in Morzine bei einem Trainingslager und waren dabei wie sein Mechaniker den regelmäßigen Service durchführt. Nach jedem Trainingstag wird das Rad zerlegt. Schau Dir das Video an und Du bekommst einen exklusiven Blick was für Greg Minnaar gemacht wird damit sein Rad perfekt läuft. Selbst die Lager werden geöffnet und für bestem Leichtlauf geölt.
Greg Minnaar ist einer der erfolgreichsten Downhiller überhaupt, in seiner Karriere wurde er bereits 3 mal Weltmeister, holte sich 3 mal den Gesamtweltcup, stand insgesamt 60 mal am Worldcuppodium. Er gilt als einer der geschmeidigsten und akribischsten Downhill Rennfahrer dieser Welt, dementsprechend legt er größten wert auf ein perfektes Rad.
Пікірлер: 75
Wow what an honor to watch the Goat and his mech work on the bike, which I am surprised weighs in at 39.5 lbs
Congratulations Greg on the outstanding race in Portugal!
Go Greg we love U!- all the best from South Africa.
Супер профи мастер! 👍 Супер профи 🚲 Bike. Santa Cruz V-10 - - 🐴 конь всех времен и народов вселенной! Благодарю вас за видео и работу!
GRANDE Greg !!!!! 👍👍👍
Excelente Ensamblaje, y muy buena preciso.
@worldofmtb
2 жыл бұрын
Great you like it! :)
So therapeutic.
Nice work ...
Nice Video!! God Job!!
Congratulations for the 2021
BeautyFull DownHill Bike 👍😀🖒
@worldofmtb
2 жыл бұрын
Made me lough loud! :D :D :D
Un excelente mantenimiento.
@worldofmtb
2 жыл бұрын
Great you like it! :)
Schönes Bike 👌👍
Beautiful bike ✌️🇮🇪✌️
@worldofmtb
2 жыл бұрын
Great you like it! :)
its so beautiful
Could watch Marshy for hours!
Whos sais us South Africans can't do anything right😎😎Carry on you Legend Greg Meneer.. I am also hapoy to be a 'KZN' boy !!!!!
isso que é bike topp
Shimano saint 😍👍
Muy Linda.
Nice bike 🤩
@worldofmtb
2 жыл бұрын
Great you like it! :)
@alberthfebry2487
2 жыл бұрын
I'll wait for the next bike 🤩
worldclass vid of a worldclass bike of a worldclass rider and his worldclass mechanic ;) Thx! I couldn't see which WD40 lube has been used for the bearings and some of the axles. Can anybody help me out? Thx 🤙
@marcod6773
3 жыл бұрын
I was asking me the same question. At 2:55 I think I see WD Bike wet lube
@gogovitch66
3 жыл бұрын
@@marcod6773 I also tried to recognise which lube it is. But wet and dry lube look the same. I couldn't read it properly.
@patriceprimus4386
3 жыл бұрын
Yes guys, its Bike *wet* Lube
I thought every mechanic hates those high pressure washes
@santacruzbicycles2841
3 жыл бұрын
Typically something you would NOT want to do if you are just doing a standard bike wash, but if you are just about to do a complete clean and full rebuild it's fine. The concern would be in washing away the grease/lube from all the bearings (Pivots, hubs, headset, etc.) which you definitely do not want to do, but since Marshy is about to pull apart, clean, re-lube and re-grease every single moving part, it's all OK👍
How often does he do this kind of rebuild? After every race weekend? How long is the total time it takes him to do all that?
V10💘💞🔥💪✊✌
What kind of lube is that? The one that you were using for the hub bearings.
@wd-40bike79
3 жыл бұрын
It's the WD-40 Specialist® Bike Wet Chain Lube
@frenzgraph
3 жыл бұрын
@@wd-40bike79 What's the benefit of using a chain lube instead of bearing grease? He's using chain lube for wheels' bearing and grease for headset bearing!
@MatTancock
3 жыл бұрын
@@frenzgraph Chain lube makes the hub noisier, more friction. More grease = softer hub.
i hope my mtb dream bike may do come true...
Werden die Bikes ohne Drehmoment zusammen geschraubt ? Are the bikes screwed together without torque?
Always wondering What's the thing underneath the screws of the rotor is, or at least why its there🙃
@gogovitch66
3 жыл бұрын
they are washers for two screws at a time, so they don't bind to the rotor by heat
@akosyjonathan
2 жыл бұрын
@@gogovitch66 did he using 203mm front and rear?
@gogovitch66
2 жыл бұрын
@@akosyjonathan I guess so
🤟🤘👍
what´s that air cap on fork? llli?
Ab 16:54, werdendie Speichen ohne Tensiometer nach gezogen ? Und nicht in einem Zentrierständer ? Ab 17:03, wird so der Seitenschlag überprüft ? Da bin ich aber entäuscht, hätte ich nich gedacht vonso einem Team.
1+ sub
Wheres the Goldwing with the bike tools
Still with Marshy☺️☺️☺️😞
what kind of tire pressure gauge is being used.
@promodsteve7882
3 жыл бұрын
looks like Topeak.
Why did marsh leave or get replaced?
What's the issue of using Metall and resin pad? I never saw this
@aminkhorasany_4676
3 жыл бұрын
No issue it’s preference - metallic it works better when it’s hot and heated up it lasts longer but wears the rotor more - resin works better cooler lasts less and doesn’t wear the rotors much
@alexanderjendreck6356
3 жыл бұрын
@@aminkhorasany_4676 yeah ok i know because I work in a bike shop so it's yust preferred
@WhatWouldNarutoDo0611
3 жыл бұрын
@@alexanderjendreck6356 why you asking then ...
@errorbrd9001
3 жыл бұрын
I learned one kr two thinks, thx
@vov4yk46
3 жыл бұрын
Alexander Jendreck Greg came from motocross. That’s what he used to do there. Every time he wasn’t able to decide which one to use Marshy would put a combination of metal and resin.
The bike is my dream. Master handsome. You guys are pretty. Are there any good people? Please give me a frame you can use an aluminum jet if you don't mind
But how do you remove plastic shock cover????
Please tell me the song??? I beg of you :))
Is that axs?
@worldofmtb
3 жыл бұрын
Hey Endeavour. No, it's not Sram AXS but a Shimano Saint drivetrain ;).
what’s the front tyre pressure?
@worldofmtb
3 жыл бұрын
They get inflated to 3 bar / 45PSI and let them sit with that pressure as long as possible. The final pressure is set right before the run.
From 4:54, are the spokes retightened without a tensiometer? And not in a truing stand? From 17:03 onwards, is this how the lateral movement is checked? I'm disappointed, I wouldn't have thought this of such a team.
I want to have one but in Malaysia the price is very expensive. 😔
He uses high pressure wash lol I use windex lolol
*******......
Good bye bearings...
@guspam5982
2 жыл бұрын
Nah he opened and regreased them after, so it's all right
No le veo muy fino a este mecánico 😁 Y será un crack, pero hay detalles en el montaje que no son muy profesionales🤦🏻♂️