samsung smart TV D5700 eeprom reset, bootloop, boot schleife, factory reset
Тәжірибелік нұсқаулар және стиль
repair Samsung TV type D5700
OF OWN RISK! Auf eigenes Risiko
Video in German language and english subtext
please comment the video***
PLEASE: Take a Minute and read the great comments
TV hangs in the bootloop, here the EEPROM Reset. other Samsung TVs may have an other EEPROM location - please refer SAMYGO for the correct EEPROM
TV hängt in der Bootschleife fest
im Video beschriebene EEPROM kann bei anderen TV-Typen abweichen. Bitte im Internet nach dem Typ und SAMYGO suchen, da findet man andere Typen.
Пікірлер: 370
Hallo Heidemacker, ich danke Dir das Du dieses Video uns allen Kostenlos zur Verfügung gestellt hast. Es ist Corona, unser TV ist vorgestern in den BootLoop (wenn man das so nennt) gegangen. Mein Mann und ich habe technisch keine Ahnung. Durch Dein Video haben wir unwahrscheinlich viel Geld gespart. Die Büroklammer hat bei uns nicht funktioniert aber der Vorgang mit dem Eiswürfel war von Erfolg gekrönt. Hier an dieser Stelle ein Riesen DANKE. Bleib gesund
Big success! Worked for my UE46D5500RW! I tried it after the TV technician said the motherboard needed replacement and that there is no motherboard of this type available anymore-meaning I had to buy a new TV. Vielen Dank!
@billbetta3530
3 жыл бұрын
Καλησπερα μπορεις να περιγραψεις τα βηματα που εκανες;Εχω την ιδια τηλεοραση ακριβως.
Vielen vielen Dank :) Du bist Der beste.
You star 🌟. Used a small wire to link the connections and it worked first time. Thank you👍
@Heidemacker
5 жыл бұрын
Thank you for your comment. Are yoa already a heidemacker-subscriber?
THANKYOU VERY MUCH!!! YOU JUST SAVED THE DAY! AND THIS TV. 🙏
Hatte zwar auch eine Bootschleife, äußerte sich am Fehlerbild anders, aber der Reset hat mir auch geholfen, danke
@Heidemacker
5 жыл бұрын
gerne:-)
samsung ue40d5500rw danke schon :) this guide works really good
Thanks Herr Heidemacker, it works for my UN46F6300. The pins are located on the top of the motherboard for this model. 10 pins, look for the RESET and the EEPRON_SDA (3th and 5th from the right).
Hat bei mir genau so funktioniert. Super Tipp! Danke dafür!👍
@Heidemacker
5 жыл бұрын
Gern geschehen :-)
@christianescort2479
4 жыл бұрын
Habe es so probiert hat dann alles Funktioniert. Habe mich gefreut.... Keine 15- 20 min später began der teufelskreis von vorne.. An was kann das dann noch liegen ?
Thanks so much!!! 🙏🏼 you help me!!!
Thank you very much !!! Info - menu - mute - power was enough for my tv. I pressed those 4 at same time and tv inmediatly worked fine again! Viele viele dank Herr Heidemacker
@Heidemacker
5 жыл бұрын
great!
Working perfectly! Thanks very much.
@Heidemacker
5 жыл бұрын
great!!!
A huge thank you. This was the fix for my constantly rebooting 2011 Samsung TV. My wife is especially impressed that I fixed it with a paperclip!
@Heidemacker
7 жыл бұрын
Great!
@gagnonboofer5068
Жыл бұрын
Français
Danke Bro dein video hat mir mega geholfen 😁😁
@Heidemacker
6 жыл бұрын
Gerne
Thanks buddy it Works to me!!!!
Merci beaucoup pour cette publication ça m'a beaucoup aidé à faire un reset de ma télévision smart tv qui était bloqué
@user-ku9fj8go8g
4 жыл бұрын
Svp où trouver le cable de connection j'ai le meme probleme. Merci
Vielen Dank, hat gut geklappt mit mein UE55D7090. Nun sehr vorsichtig sein. Nochmals thousand mal Dankeschön.
@Heidemacker
Жыл бұрын
Das freut mich 👍
Super, vielen Dank!
Danke für die Anleitung. Hat bei mir gut geklappt 💪🏼
@Heidemacker
6 ай бұрын
Das freut mich 👍
es hat geklapt obwohl ich dem UE46F6500SSXZG habe ist zwar etwas komplezer da es mehrere solher löcher gab aber es hat dennoch funktioniert lauft wie ne eins nacht dem reset danke für deine hilfe hab gefühlt 100 videos darüber angesehen aber keines hat mir geholfen viel dank
@Heidemacker
5 жыл бұрын
gerne!
@oskarwilli6415
5 жыл бұрын
Hey Tag auch habe auch den UE 50 F6500 BJ 2013 hatte auch einen Bootloop bin mit den Trick mit dem Feuerzeug Gas daraus gekommen. Habe sehr die Vermutung das die LAN Verbindung und die Smart TV App was damit zu tun haben könnten. habe es nach der Anleitung gemacht. metropolitanmonkey.com/samsung-tv-schaltet-sich-aus-und-an-hilfe/
Thanq it resolved my tv problem
He arreglat la meva TV Samsung UE40F6400 gràcies a aquest video! :) I just fixed my Samsung UE40F6400 TV thanks to this video :) Danke!!
@Heidemacker
7 жыл бұрын
perfect
it works for my UN40D5500 thanks!!!!
@nestabmw
4 жыл бұрын
could you plz describe how you did it? you used the paperclip when the TV off? thanx
Vielen Dank, hat mir geholfen!
@Heidemacker
3 жыл бұрын
Gern geschehen
Thank You !.. Worked on my UN50F6350AF 50" inch 2013 T.V. :-)
Danke schön
work for me ! thank for the tip !
@Heidemacker
5 жыл бұрын
Great!
UE40D5500 Very old model! Vielen Dank, der Reset funktioniert! 🙏 Great job it works for me! Bye bye boot loop! 😅 Köszi a tippet működik, ha erre jársz próbáld meg nyugodtan!
@Heidemacker
2 жыл бұрын
Great!
very thankful for video clip
Thank you very mach
The good new: it broke the loop & the tv back to life again. The bad news: the tv still randomly restarts but less frequently. Thanks a lot.
@nicoberge4347
4 жыл бұрын
Mate did u find a solution ? Im in the same position
@mohammedhaggag2734
4 жыл бұрын
Nico Berge after reviewing a lot of videos, I found that the issue is in the power supply board where the clicking sound arises. Currently I am between: 1- buying a full new board and keep this board as a spare part or 2-to bring an avometer and measure the voltage of all the board components to define the damaged part and replace which is in my opinion not the suitable solution for me.
amazing it works ...samsung UA40D6400.....thanks sir ....im from Philippines
@Heidemacker
4 жыл бұрын
great!
It's worked for me thank you very much.. You save me..
@Heidemacker
3 жыл бұрын
w´re welcome
Works like a charm. Remember it will only work for situation like in the video.
@gautierpfeiffer4899
6 жыл бұрын
Can you describe the steps in English please. thanks a lot
Danke schön, bei meinem UE46D6500 hat es auch geklappt. Der ging zwar an, konnte dann aber nichts umgestellt werden, weder mit FB noch an den Nahbedientasten am TV. Nu funktioniert er wieder. Samsung hatte am Telefon gesagt, das er zu alt wäre, um das es sich lohnt einen Mechaniker rumzuschicken und haben mir einen 15% Gutschein geschickt;-).
@Heidemacker
4 жыл бұрын
Prima, freut mich, wenn ich helfen konnte und Danke für den Kommentar
Is the procedure executed with the TV on? Any suggestions with the UN32H5500AF Model? Could you please show me a step-by-step guide document? Thanks!
Thank you, it works for me on a TV set Samsung UE40D5700RSXXN the boot came on the channel image for about 4 or 5 seconds and rebooted always, now it is finish..
@Heidemacker
4 жыл бұрын
great!
very good for teach me
It works for me. Thanks for this video
thx a lot, it saved my samsung f4500
thx. it worked!
@Heidemacker
3 жыл бұрын
Great!
thank you so much. is this method suitable for samsung smart tv UE40D5720
Thank you for your advice. When I tried this, I connect with paper clip and I put power on, the TV doesn't start at all ( power button is on/off for about 5 seconds then it's completly OFF ) It's like the paper clip stop the TV from starting at all. You have a solution please ?
Hat bei meinem UE46D5700RSXZG leider nicht den gewünschten Erfolg gebracht. Ich musste zusätzlich den NAND vereisen. Letzteres hat dann zum Erfolg geführt. Dennoch vielen Dank für die Anleitung!
@Heidemacker
Жыл бұрын
Danke für die Info
100/100 good men
something more the jumber between the pins do you perform when the tv is ein or aus ?
UE32D5500 arbeitete bis das Gas zum Feuerzeug :-) Vielen Dank. Vielen Dank. Vielen Dank...
Is correct . The issue is " bootloop ' . Problem solved . The cause is firmware . After hard reset is necessary to update the firmware and factory reset in service menu . Otherwise the problem will appear soon or later .Danke
merci
Thanks Heidemacker, This worked for me. Rear cover off Paperclip in Power up tv Leave for 20 seconds Unplug tv Remove paperclip Power up tv It is now working. Thank again !
@Heidemacker
3 жыл бұрын
great!!
Grüße Gilt dies auch für das Samsung 32D5500, das nach dem Einschalten immer noch neu startet? Vielen Dank
EEPROM reset didn't work for me sadly, but cooling down the NAND Chip (using an ice cube and some cling film) actually did. TV (UE40D5700) seems to work for now. :)
Hi, I have Samsung UE40KU6075 , Mb BN94-02528, Eeprom Winbond 25Q40 CLSIP. There are 7 pins on the mainboard next to eeprom : CS, MISO, WP, VCC, CLK, MOS, GND with no SDA pin. Which pins should be short wired to reset eeprom?
@stoneygaming4229
7 ай бұрын
Vcc and gnd
Thank you so so much. I will try. The Samsung TV UA40D5500. It's the same thing.
@MrDadosz
5 жыл бұрын
Did you fix it?
@truongtran9527
5 жыл бұрын
I have fixed it. It's all right now.
@truongtran9527
5 жыл бұрын
Thank you so much, ad!
@ramongutierrez1095
4 жыл бұрын
Same model of your tv but mine doesn't work.
wish this worked for me :-(
Hi! does it work with model ue37d5500? thx for the help! :)
thank you so much, i followed your step it fix my TV. But i have a question. It went back to old firmware should i update firmware i am a bit scared now.
@Heidemacker
7 жыл бұрын
if you are scared and the actual version works, don´t do this update.
@daniela_dundel
4 жыл бұрын
u mean current version not actual
Sehr gutes & verständliches Tutorial! :) Ich habe einen UE37D5720 - nach dem brücken der 2 Pins bleibt er länger an, jedoch kann ich keinerlei menüs öffnen (weder ohne gebrückte pins - noch mit gebr. Pins) die rote LED zeigt aber an das er IR-Signale empfängt. Das Samsung smart tv boot-logo ist das einzige Bild welches sich ünerhaupt auf dem Panel zeigt. Was kann ich hier noch machen? Freeze werde ich probieren wenngleich ich da wenig hoffnung hab. In letzter Konsequenz wäre die Frage wie hoch die erfolgs-wahrscheinlichkeit bei einem nand tausch wäre. Gibt es irgendwo fertig programmierte nand-chips für dieses Modell? Für hilfreiche infos bin ich ausgesprochen dankbar.. Gruß
@tidoskido
9 ай бұрын
I have the same problem with my U37D5520
Danke... Es klappt auch mit dem UE40D7090! Wenn alles soo einfach wäre!
Es liegt nur selten an der Eeprom meist musst ein anderer Baustein erneuert, sowie programmiert werden mit neuer Boot Software.
hi sir i have samsung ue40d5003 and I have almost the same problem as you the damage was definitely caused in my case by a generator that I installed burned the protection and created the following problem when I have not connected the antenna, any input source lights up normally when I connect, however, when it goes to show an image, the image appears momentarily and then restarts from the logo and the same again. Can you tell me from your experience what could be wrong or where should I look?
Bei mir hatte es erst nicht geklappt. Dann habe ich nochmal den Trick mit der Kühlung probiert... Perfekt! Kein bootloop mehr! Jedoch wurde mir nun eine Meldung angezeigt, dass ich doch bitte im Service Mode den Type, local set, und Front Color Option einstellen solle. Ich also in den Service Mode und... auf was soll ich die genannten Punkte denn stellen? Ich habe schon einiges ausprobiert und im Internet geschaut. Bisher ohne Erfolg. Das Problem ist das ich jetzt kein Bild mehr habe... ich habe einen Cromecast an den Fernseher angeschlossen, dieser zeigt mir dann das Google Logo und dann ein schwarzes Bild (aus anderen Fernsehern funktioniert er). Auf meinem Handy ist der Cromecast jedoch zu erkennen und ich kann via Spotify auch Musik auf dem Fernseher wiedergeben... jedoch ohne Bild. Auch das normale Einstellungsmenü ist auf dem Fernseher sichtbar. Also gehe ich nicht von einem Defekt des Displays aus. Kann mir vielleicht hier jemand weiterhelfen?
👍👍👍
Question: is the TV on when you used the paper clip? or 1st paper clip 2nd tv on 3rd 20 seconds...then TV off? ...and when do you remove the paper clip? Could you plz give me some details on that part? thx
@Heidemacker
4 жыл бұрын
1st paper clip 2nd tv on 3rd 20 seconds...then TV off?
Just fixed my UE40D5500 stuck in bootloop... Thanks!!
@ridmohamad7405
4 жыл бұрын
My TV still can't. Any others troubleshooting to advice? Thank you
Hey danke für das Video. Suche gerade vergeblich auf einem "bn94-03656e" Board nach dem Eeprom, kann aber keine Infos dazu finden :/, Sie wissen nicht zufällig was?
Hey wie mache ich an einem UE55RU7379 Ein Eeprom reset? er bootet auch alle 15 Sek Neu... würde mich wirklich riesig über die hilfe freuen Ist ein BN94-1411e Mainboard bzw. BN41-02703A Weil hier gibt es keinen SDA Mehr bzw auch den IC3102 nicht nur einen IC801 und IC802 diese habe ich auch versucht in allen möglichen Pins also 1-8/ 8-1 Gebrückt aber es hat sich nichts geändert. Der Fehler ist aufgetreten weil der Fernseher ein Display schaden hat und ich idiot im Service Menü auf DP Test gedrückt habe (denke mal DisplayPanel Test) und jetzt bootet er nurnoch neu ich möchte aber wieder ein Bild haben auch wenn das display kaputt ist
Hello, Pl. help me. I tried it on my Samsung UA32D5900VR but it not works. It has same board as 5700, but unfortunately not success. My TV is restarting on every 10-12 seconds. I tried your method 4 time with U-Pin and Cable but results are same. Pl. help me.
TV is HG32ED450sw and the board is BN94-07314U P11 or BN41-02409A. Power supply is ok. at power on the red led is lit severeal times. How can I factory reset?
I try this method, it reset the eeprom, but still have the reboots, so i remove the board, put in the freeze for 10 minutes and now its working!!
@lassemustonen5369
3 жыл бұрын
I used cold spray...
is this only for smart samsung or for all samsung tv i have samsung ua32eh4003
Hello, I have the same problem (ue32D5700) however no luck with the paperclip. So my question.. Can it be your legs of the paperclip are that long they touch the housing behind the mainboard. And so grounding the two pins you connected??
@Heidemacker
6 жыл бұрын
Hi, regarding your question: Sorry, the Clip Do not Touch the the housing..
@Heidemacker
6 жыл бұрын
Try this... Connect > EEPROM_SDA + H_RESET (VCC) - White flashed display auto restart, Power off. Done
@henkbraam8792
6 жыл бұрын
Ok, thanks. Then this methode is not working on my TV. It's strange because when the clip is inserted nothing changes in the startup. It is the same as without the clip...
@Heidemacker
6 жыл бұрын
this could have the reason in different Chips, which are used by Samsung, or the board/the EEPROM ist not ok.
Hi, I have the same TV as shown in the video . Can you please tell me the steps to follow, in case it doesn’t work at least i know i followed the steps correctly! Thank you
@Heidemacker
4 жыл бұрын
i guess the steps are shown in die video. Important: you have to use the right pins with the paperclip. If this doesn´t work, try to cool the chip with electronic-cooler-spray. see also some of the comments...
danke for dise infurmation.
@Heidemacker
5 жыл бұрын
gerne
Hallo Beim überbrücken Strom an sein oder erst Überbrücken danach Strom an
40D5707 - не помогло, но спасибо !
K9GAG08UOE Nand problem. IC programmer +Data
Any idea how to do it on a LE32A330J1N??? Please i need help
Didn't work for me, I had to replace and re-program the K9GAG08U0E chip above these holes
Habe mein TV schon zweimal damit resettet. Was passiert, wenn ich den Clip ganze Zeit drin lasse ? Danke nochmal :D
Hatt bei mir leider nicht funktioniert aber danke für das Video
I have a ua40d5500 can I used this formula
Hello, I have a UE32D5500 with same mainboard. Please help me to write it down the reset procedure ( it could be happend I do some mistake). I did some times as you show on the video but for me it doesn't work. TV again restart every 6 sec. I checked the capacitors and IC legs it looks good.
@Heidemacker
4 жыл бұрын
Hello, try to freeze the chip eg. with lighter gas...these were suggestions from other users concerned
Habe den Reset wie in der Anleitung durchgeführt. Leider hängt der Fernseher immer noch in einer Bootschleife.... Allerdings kommt jetzt nach dem Starten nicht mehr die Mitteilung, dass kein Sender gefunden wurde, sondern das keine gespeicherten Sender vorhanden sind (auf Englisch). Daher nehme ich an, dass der Reset funktioniert hat.... Hat jemand noch einen anderen Vorschlag um aus der Bootschleife zu entkommen? Vielen Dank im Voraus!
Hast du denn die gesamte Zeit den stromstecker inder Steckdose gehabt? Oder erst die klammer rein und dann stecker eingesteckt?
@Heidemacker
4 жыл бұрын
Stecker raus, Klammer rein, Stecker rein. Wenn das nicht funktioniert hilft das Vereisen des Chips meistens weiter (Siehe die anderen Kommentare)
MY 3D GLASSES DON'T PAIR MY TV SAMSUNG. DO I NEED A WHOLE NEW MAINBOARD OR JUST REPAIR THE BLUETOOTH TRANSMITTER IN IT? THANKS.
Don't work on my UE32D5700. But thx for the info! :)
@digisaster
6 жыл бұрын
Did you also try to freeze the NAND chip? , see www.digisaster.com/?p=377 for details.
@quinto1972
5 жыл бұрын
On my UE40D5500 TV I tried to do the hard reset without success. Instead of freezing the NAND chip, the TV switched on and remained on. I then used the combination of EXIT (12 seconds) + Power keys to restore the initial values. Thank you for the tip.
@xTheClio
3 жыл бұрын
@@digisaster This actually worked thx
Habe ein Samsung ue32d5720. Mit der Klammermethode machte er ein Factory Reset(war danach wieder auf englisch). Ging trotzdem wieder aus nach 5 Sek. Auch die Methode mit Kältespray hat leider nichts gebracht. Es scheint nur das er anstatt 5 sek +- 60 Sekunden an bleibt für einmal. Danach sind es wieder die 5 Sekunden. Kann man hier noch sonst was probieren?
@Heidemacker
4 жыл бұрын
sorry, da kann ich leider auch keine zusätzlichen Hilfestellungen geben.
@kniefi
4 ай бұрын
Samsung TVs habe gerne mal seeehr günstige ELKOs verbaut bei meinem waren diese Elektrolyt-Kondensatoren schon aufgeplatzt! Kurz ausgelötet - bei Conrad 2 neue geholt (1,30€ - also 2,60€ zusammen) dann eingelötet und läuft seit 7 Jahren ohne weitere Probleme! Fing auch mit Random restarts an etc. Zeitlichen Intervalle zwischen den Neustarts wurden dann immer kürzer. Ein "Sicht-Check" der Komponenten kann manchnal schon helfen. Einen Versuch ist es wert!
Bei mir ging der Tv (UE40D5700) auch stetig an und aus (Sender lief jeweils ca 5 sek mit Ton). Leider hat das überbrücken (wie hier im Video) nicht funktioniert. Abhilfe schaffte jedoch das starke Kühlen des Flash IC1302 mittels Eiswürfel im Gefrierbeutel. (Google suche: "Lösung #4 - NAND auf Eis")
Statistically, on these mainboard models, damage to the eeprom content is about 5% of the cases, and the procedure described here, in addition to the risk of even more damage, is about successfully as often as treatment of tumor by cannabis oil. However, the NAND IC1302 content damage is 90% of these TVs ...
@heno_3098
6 жыл бұрын
If someone was unclear my information if the TV with BN41-01660 mainboard spontanously rebooted, then the damaged eeprom content is the reason for the spontanously reboot in about 5% of cases !!! BUT mostly damaged content of IC1302 NAND K9GAG08U0E is the reason in about 90% of cases. So this video solution is attempt of tumor treatment with placebo using and more or less fake solution.
@gaborkeczan4898
5 жыл бұрын
Heňo _ Is there any way to reset, or resolder a new NAND IC1302 to the motherboard? Samsung said they couldn't order a new motherboard for me, so basically it is a paperweight now. So it doesn't matter anymore if I make a permanent damage to it, so it would worth a try.
@heno_3098
5 жыл бұрын
Gábor Keczán It is possible to fix the content of the original nand by a special procedure and it is cheaper than buying a new nand ready for this TV. In addition, the new nand from China is not as good as the original one in TV production. I do not know if an email can be posted here, but I'm in gmail, so by clicking on the user you can find a contact to me. If the content of the eeprom is damaged by this unprofessional intervention, you will also have to repair the content of the eeprom, which is an extra work.
@ExclusiveMobilePhone
5 жыл бұрын
yes this is the problem. Eeprom reset by this Tv is only 5% the Nand IC is faild. Need only new programmend Nand and for secure programmed Eeprom and it works fine.
@heno_3098
5 жыл бұрын
@@ExclusiveMobilePhone It is not necessary to program a new nand, just delete the old one, but you need to know how to properly create a file for nand writing (new or old nand without distinction) and how to properly verifing of nand content after writing. It is not necessary to replace the EEPROM provided that it has not previously been destroyed by the unprofessional method described in the video :)
Connect > EEPROM_SDA + H_RESET (VCC) - White flashed display auto restart, Power off. Done.
@coriebryan3973
7 жыл бұрын
how to reset a imperial smart tv
@JULIENBV
7 жыл бұрын
sorry but could you explain a bit please?
@raileanurelu6022
6 жыл бұрын
A BIG THANK YOU !!!!!!!!!
@int0x13
6 жыл бұрын
Freel Gainstgol and when you switch on again you go into same bootloop. So it's not a solution at all.
@MartinObst
6 жыл бұрын
Worked for me too: UE40F6770 -> up.picr.de/32482270bq.jpg
samsung smart TV UA32F-4500ARSRY eeprom reset
Ich habe deine Punkte alle befolgt. EEProm reset hab ich gemacht. Nand mit Feuerzeuggas vereist. Ist das Problem noch immer da. Bin mir auch sicher das es richtig gemacht wurde da ich jetzt immer den Hinweis erhalte ins Service Menü zu gehen und dort Farbe usw. einstellen soll. Und nach dem Nand Eis ist mein Menü auf Türkisch. Was kenn es noch sein? Netzteil Elko? Gruß Und Dankeschön
Hallo Herr Heidemacher. Habe einen Dyon LED der in der Bootschleife ist. Wie kann ich den reseten. Danke
Moin, ich habe alles nach deiner Anweisung gemacht. Gekühlt und resetet. Es funktioniert aber leider nicht. Hast du noch eine Idee?
Das selbe problem habe ich auch, habe zwar hinten aufgemacht aber nichts gesehen wie bei Ihnen mit den Reset löchern.... ich kann nicht einmal die Fernbedienung oder gar den Fernseher selbst anfassen ohne das es sich nicht auschaltet UE55 7179 Samsung TV
I have the same problem in my smart tv . Model / HG32AC690 made in malysia . Can i do this way without any problems ??
@Heidemacker
6 жыл бұрын
You Can try it - without any warranty...
@7amza86
6 жыл бұрын
Heidemacker thx for reply , i'll try and tell u
didn't work for UE46D5700 :(
@harues4860
4 жыл бұрын
Hey, I fully cooled the NAND SAMSUNG K9GAG08U0E just nearby the eeprom reset with a muscle spray cooler (I only had that at home with the pandemic) several times and it worked :-)
Oi beleza, a minha tela de LCD trincou e queria saber onde posso conseguir uma tela nova pra substituição - TV 32" Samsung - LN32C530F1M - Votorantim-SP
@Heidemacker
6 жыл бұрын
Thanks for your Comment...please can you translate it to English or German?
The device has malfunctioned due to power loss during the upgrade tv samsung smart UE46ES6905U