Samsung Slim Fit wall mount tutorial

I mount TVs for a living and I often get questions about the Samsung slim fit wall mount, it comes with some parts that is actually not intended to be used for mounting, if you use those parts there will be a gap between the tv and the wall. When installed correctly there should be no gap behind the TV. If you have any questions about the wall mount I am happy to answer. More videos coming soon.
Hvis du bor i Oslo området og ønsker hjelp med montering av TV så ta kontakt, vi monterer alle type skjermer: www.oslotvmontering.no

Пікірлер: 32

  • @RichHastings-em5gc
    @RichHastings-em5gc2 ай бұрын

    This is a nice video! Can you give some details on the alternative mounting screws you have used? I have shredded 2 prior to watching this video!

  • @oslotvmontering

    @oslotvmontering

    2 ай бұрын

    Hi. Thanks. I always use some high quality Torx screws.

  • @AmirAkbulut
    @AmirAkbulut18 күн бұрын

    Does this one also work good with QE65Q80C?

  • @sni18per
    @sni18per3 ай бұрын

    thx for the informative video! is this the Slim Fit Wall Mount WMN-B50EB that is available on samsung website? also what tv model is that? am thinking of getting this mount for the TQ65Q70 i bought recently. will this mount fit it? thx again

  • @oslotvmontering

    @oslotvmontering

    3 ай бұрын

    Hi. Nice TV. Yes, this is WMN-B50EB. In the video you see Samsung the frame, the mount will fit your tv but it will not be flushed with the wall, its only the frame that is flushed with the wall on that mount. The wall mount I usually use for your tv is Vogels TVM 5405. much easier to install and make the TV look very good on the wall.

  • @dfxamirr
    @dfxamirrАй бұрын

    Hi, does it connect to S95D?

  • @oslotvmontering

    @oslotvmontering

    Ай бұрын

    Hi. Yes.

  • @Z11980
    @Z1198016 күн бұрын

    Hi great video!!! I have a question i did exactly as instructed but I can’t get to close to the wall on both sides at way . One side is more in than the other… what am I doing wrong? Best regards from Sweden 🇸🇪

  • @oslotvmontering

    @oslotvmontering

    15 күн бұрын

    HI. Takk. In the video @3:50 have you done that? That is the most common reason to why they do not fit.

  • @Z11980

    @Z11980

    15 күн бұрын

    @@oslotvmontering yes i did 🥲 and still

  • @oslotvmontering

    @oslotvmontering

    15 күн бұрын

    @@Z11980 You can adjust the TV when it's mounted, try to adjust the TV all the way to the left and then all the way to the right a couple of times, sometimes that will help.

  • @AmirAkbulut
    @AmirAkbulut18 күн бұрын

    Hey, nice video. Does this mount also work good with QE65Q80C?

  • @oslotvmontering

    @oslotvmontering

    18 күн бұрын

    Hi. Thanks, Yes it works good with the 80c.

  • @amandagu3192
    @amandagu31922 ай бұрын

    Hi, what dimensions are the Torx screws you use for the wall mount?

  • @oslotvmontering

    @oslotvmontering

    2 ай бұрын

    Hi. 5,0 x 40mm

  • @peterfry1234
    @peterfry1234Ай бұрын

    helpfull 🥰🥰🥰😍😍😍😍😄

  • @xavierdelange5341
    @xavierdelange5341Ай бұрын

    Hi, do you advice to mount with the Vogels (TVM 5605) or the Samsung thin wall mount for a 65S95D ?

  • @oslotvmontering

    @oslotvmontering

    Ай бұрын

    HI. The Samsung wall mount, just because right now the screws at TVM 5605 is not short enough for that TV.

  • @xavierdelange5341

    @xavierdelange5341

    Ай бұрын

    @@oslotvmontering Hi, idem for the 5405? We could shorten the screws ? ;)

  • @oslotvmontering

    @oslotvmontering

    Ай бұрын

    ​@@xavierdelange5341 Not a good idea unfortunately, I have the correct screws here with me all the time, but you are probably not from Norway?

  • @xavierdelange5341

    @xavierdelange5341

    Ай бұрын

    @@oslotvmontering No I've send you a message via your site. Tkz, Xavier.

  • @xavierdelange5341

    @xavierdelange5341

    Ай бұрын

    @@oslotvmontering no I m in Belgium I’ve send you an email.

  • @laurablanco4837
    @laurablanco48372 ай бұрын

    Hello, what do you do with the wires with a Samsung Neo QLED QN90C? Do you pasa them through the wall?

  • @oslotvmontering

    @oslotvmontering

    2 ай бұрын

    Hi. Sometimes through the wall and sometimes we use a cable hider on the wall instead.

  • @xavierdelange5341

    @xavierdelange5341

    Ай бұрын

    @@oslotvmontering Great Vids. If you pass through the wall which plastic cover do you use once you have make the hole ?

  • @neilranson4185
    @neilranson418527 күн бұрын

    Hey, great video. Does it connected to the s95b 65inch as I can’t for the life of me see how and everything online is saying it does

  • @oslotvmontering

    @oslotvmontering

    27 күн бұрын

    Hi. Yes. I have mounted s95b on that before.

  • @neilranson4185

    @neilranson4185

    27 күн бұрын

    @@oslotvmontering can you share a photo or a link to a photo or video as I can’t find any instructions on how. There doesn’t seem to be anyway to connect the brackets to the back of the tv

  • @oslotvmontering

    @oslotvmontering

    26 күн бұрын

    @@neilranson4185I do not have pictures or av video for that. You have to use the original top holdes on the TV. Its much easier to mount it on a regular mount.

  • @neilranson4185

    @neilranson4185

    26 күн бұрын

    @@oslotvmontering after much online searching Iv found out I bought the wrong year mount for the s95b. I have the 2021 WMN A50EB when I needed the 2022 WMN “B”50EB. I believe the only difference is the longer 40/45mm C3 bolts included in the 2022 mount needed to attach the two plates to the back of the tv. The 2021 mount only has 30mm bolts meaning they are to short to reach the threads of the top two attach holes on the back of the tv. I hope this is the ONLY difference as Iv ordered some 45mm Samsung tv mount bolts with washers as I’ll try to hang the tv this week

  • @mert7324
    @mert7324Ай бұрын

    Hey, does it work for 77S95D?

  • @oslotvmontering

    @oslotvmontering

    Ай бұрын

    Hi. Yes.