Samsung Refrigerator not cooling trouble shooting restriction in capillary
Trouble shooting a Samsung refrigerator that’s not cooling. How to install a bullet piercing valve and unclog a restriction with a filter drier
Trouble shooting a Samsung refrigerator that’s not cooling. How to install a bullet piercing valve and unclog a restriction with a filter drier
Пікірлер: 35
Hey good video i am now starting to do the refrigerator work and have learnt a lot from your videos keep up the good work
I love detailed video like yours, thanks
Hi, this is Edward from Lake George/ Lake Champlain area of upstate NY. keep up the good work!
Thank you for this very detailed and easy to follow video.. great work.
@appliancerepair420
Жыл бұрын
Thanks for watching. New videos are coming this week.
Great video Brother 👍🏾
Helps a lot! Better a restriction than a pin hole leak somewhere in the pipes/tubing! My garage refrigerator stopped cooling! Hopefully the new capacitor/relay will fix it because I wasn’t getting any resistance on the relay when I checked w my multimeter. If that doesn’t fix it than I am afraid this may be the issue! I know my seals are well in tact as well. I may have to get a torch, the correct solder, and 134a refrigerant which is all very expensive!
Very good. Well explained, thanks.
@appliancerepair420
10 ай бұрын
Thanks for watching glad it helped
Great video, what is the little clamp called that you added to be able to connect gauges and refrigerant?
Great video but personally I would have just sealed to end of the old drier while it was still connected and left the capillary tube open, this way any crap tats causing a blockage will be blown out of the system rather than into the evaporator. After the blockage has cleared replace the drier and recharge as normal.
Educational and informative
Hello, I bought a used fridge that was not cooling. I thought it was going to be something simple, but when i open the back the filter dryer is cut in half. Do i need to add a new one?
Hi teacher, don't be tired, my work is mobile and I just started. What is the best way to leak? Thank you for your guidance
@appliancerepair420
Жыл бұрын
You can use dish soap or by this from Amazon Nu-Calgon 4182-24 (1 qt. Spray Bottle) Cal-Blue Plus Micro Gas Leak Detector, Single Unit a.co/d/iObMJVT
What number of capillary does that BK190CL2C/ Compressor have? I think it's the same one from that refrigerator.
Great stuff. Should I always not think first that there's a leak in the evaporator if I guage up and see the system is running in a vacuum??
@appliancerepair420
9 ай бұрын
Can also be a restriction.
Hi there i have a samsung rf4287hars 4 door fridge. We got is used and needed refrigerant so we had some added by a tech and has worked flawlessly for about 2 years. About 6 months ago the fridge began to ice up the coils, went ahead and replaced the temp sensor, heating element and defrost sensor and it began to work fine again. 2 weeks ago, the fridge section began to ice up again time but even worse now, the freezer stopped freezing and is at room temp as well as the middle drawer or coolselect section. I have checked the fan and its working, cleaned the evaporator coils but no luck. I also checked the red led light on the board and its solid red. My compressor does turn on and fan too but the compressor does sound a bit weak vs how they shake and are a bit louder when working at full force so not sure if the freezer not being cold is a low refrigerant symptom or sensor symptom. Please help.
@appliancerepair420
Жыл бұрын
Kinda hard to tell. If you have a voltage meter I would check the defrost heater. I know that you replaced it already but I would check it. If you have guages since you said Freon was added before you can check and make sure it’s not in a vacuum. Might Evan have a leak in the evaporator. Or some one left the door open. Hope this helps. Thanks for watching
@gr2262
Жыл бұрын
@appliancerepair420 I added the valve to fill it with r134a at the bottom line and checked the PSI and it's at 3. Do u know what it's suppose to be on my model fridge? Someone told me it should be higher but all videos I've seen all say between 1-3 PSI on the gauge is normal when adding refrigerant
I'm having trouble with my samsung frezzer not working refrigerator cooling but freezing up after about 2weeks after defrost any suggestions?
@appliancerepair420
Жыл бұрын
Could be defrost heater or defrost thermostat or board depending on your refrigerator.
Can all restrictions be fix??? I was told part is inside samsung refrigerator and not accessible.
@appliancerepair420
Жыл бұрын
Yes. All restrictions can be fixed or bypassed
can you do a video on how to read a schematic thank you brother.
@appliancerepair420
Жыл бұрын
Will do.
You should turn the bottle upside down??
How much for a job like this?
great work, where are you located?
@appliancerepair420
6 ай бұрын
Orange County California
@RmzStudio-tl3rt
6 ай бұрын
@@appliancerepair420 Is There a way to contact you, Id love to get your help man, i believe I have a restriction just dont have the experience you do to do the capillary clean and repair. Let me know
Hi my Samsung refrigerator is not cooling the drinks is cold but my thermometer say it’s between 40-50. Evap is not icing up
@appliancerepair420
9 ай бұрын
Will put out a video later today on that. Look out for it.
@richard203
9 ай бұрын
did u put out the video i dont see it@@appliancerepair420