Great effort, but would have been better if you kept on tearing down. I'm mostly interested in the new hinge design and updates to the display.

@PBKreviews

Жыл бұрын

Thanks, yeah if it was an entirely new design I would have for sure taken it all the way apart, but since its so similar to the flip3 and the fact that other people will post videos on the hinge within a week or two after my video, I didn't want to render the device useless since there usually isn't that many views on my videos to recoup the cost of the device. :)

@manuelrodger8929

Жыл бұрын

I've had my 4 since like January n been great .

@ajproart2

6 ай бұрын

​@PBKreviews great video, none the less. But the Z Flip 2 & 3 screen can be plugged into Z Flip 4 temporarily just to access the info from Z Flip 4? I'm not planning to fix the Z Flip 4, but there is some footage I really need from it 👀 Thanks in advance

أحسنت يا صديقي. مزيد من الإبداع

Super thanks bro! Very educational indeed

@PBKreviews

Жыл бұрын

Glad you enjoyed it!

Maybe down the road you could show how the hinge assy is installed since lately many users are reporting failures without any type of over use or abuse. with the hinge failure the phone is pretty much unfoldable. Great video should come in real handy for all the bad Flip 4 phones.

@Shinix2Koroshi

11 ай бұрын

People think they are the hinges but in reality it's actually the magnets that hold the phone together.

Your teardown is top and clean

I have a question... If the pcb board charger are faulty, do affect the signal network?

Incredible video, thank you

@PBKreviews

Жыл бұрын

You're welcome!

Thanks for this great video, can you tell us where to get parts for it?

Anyone know if the storage chip be easily upgraded with a SMD reworking station?

This was very informative. I can see how both battery capacities add up to 3700 mah. I'm waiting for this phone to ship. Thanks for the info on its internals.

@PBKreviews

Жыл бұрын

You're welcome, glad it was helpful :)

Always love your disassemble videos sir. Any chance you would consider doing a video on removing or replacing the screen on any Samsung Foldable device?

@PBKreviews

Жыл бұрын

On the Z Flip 3 video I did, I removed the foldable screen so you can watch that video and see it.

@tims4472

Жыл бұрын

@@PBKreviews Just viewed it Thanks. I have had all the foldables at some point after they came out and i always wondered how the screen looks underneath! Your Awesome!

Thanks. I was able to fix my partner's z flip 4. Her phone was shutting down whenever the phone was flipped. I thought something was loose inside so I watched your video and tried to disconnect and reconnect everthing. After that, phone is working just fine. Thanks, bro!

@PBKreviews

4 ай бұрын

You're welcome :)

@raheemmuksan5725

3 ай бұрын

Hello boss. Same problem din po saakin ginaya nyu lang po ba lahat?

Thank you. love this video. :)

@PBKreviews

Жыл бұрын

You're welcome :)

Watching from my flip 4 and I love it. But in paranoid about the screen breaking like the flip 3 so many complaints and pictures and reviews of the crack on fold

Thank you for these step by step instructions. You should give lessons to everyone on how do create viewer-friendly DIY videos!

@PBKreviews

Жыл бұрын

You're welcome and thanks 👍

@texbaz2

11 ай бұрын

I can assure you that it's the teeny weeny flimsy hinge samsung used on the flip 4. when mine dropped Approx 12-16 inches off the table the fall caused the hinge retainers on one side to shear.. No magnets at the hinge end. That's why I will never own another Samsung flip or fold.

what is the reason why when some of the flip phones are blinking when flex mode? is that related to screen or other hinger related problem?

My flip 4 has a black line in middle and also the lower half of phone flashes every time i opens it .... can it be right without chanting folder ??

Which cable is for the screen? Or screens?

Hello, thank you for this amazing video. By the way, Im having a network/sim problem, I tried all the troubleshooting steps and nothing work, so I think the problem is the hardware? Do you know which part do I need to order? Is it the PCB?, Wave antenna? Qualcom x65 modem? Please help. Thanks

Please where I can buy the screen to make replacement by my self

Thanks for this...keep it up

@PBKreviews

Жыл бұрын

Thank you, will do.

whats does the large organge flex is for?

Much appreciated 😀

How do i fix the hinge on it?

Brother need an advice ..can we replace flip 4 with flip 3 display..my flip 4 display is broken so can I replace it with flip 3 display …? Plz let me know

I went to know if the flip is not opening how would I do it

Question.... would you know why my z flip 4 disconnects from battery when i close it? It's either getting a short somewhere or the hinge is pulling the battery cable somehow? It only works when it's open. The second i close the phone it turns off and i cannot turn it back on until i open it up again.

@awwon6432

7 ай бұрын

My zflip4 would just shutdown when closed, unless it's charging. Gave it to a service center 2 days ago. They said it'll be fixed for free cuz it's under warranty, was told it was something to do with the motherboard. Got the phone back today, it had no more scratches on the body aswell as the screen protector, almost as if the entire phone was new😅. Though I think it's something to do with the battery in the top half of the phone👍 Hope yours is fixed

Thank you sir much appreciated for a professional level explanation 👍 ❤

@PBKreviews

2 күн бұрын

👍 you're welcome

great video btw can you do the realme gt2 master explorer edition its a new phone with the all new LPDDR5x and a leather back

@PBKreviews

Жыл бұрын

Thanks! You can see the teardown video of that phone at this following link: kzread.info/dash/bejne/mW2auKeAlLm6Y5s.html&ab_channel=%E5%BE%AE%E6%9C%BA%E5%88%86WekiHome . I don't think I will be doing this one, due to the cost vs views I get on these model videos.

İ think channel should have more subscribers i love you broo

@PBKreviews

Жыл бұрын

Thanks! 👍

Beautiful.. Love from 🇮🇳

@PBKreviews

Жыл бұрын

Thanks! :)

On my flip 4 the screen has broken all the way in the middle where is the hinge. Anyone has screen replacement? If yeh 2nd screen ia better? My phone is on screen replacement. Now am hesitating to keep the phone or sell it.

Hi, thanks for perfect video, can I ask you about tips wish way possible to buy new screen Samsung Z4 flip - my it was broken after my new phone was fallen . Thank you man.

@PBKreviews

Жыл бұрын

They sell the outer and inner screen assemblies on ebay but the inner is a bit pricey. If you broke your inner, I would suggest sending it to samsung for repair since their price would be cheaper. Here are some links for example: www.ebay.com/itm/334568591062?hash=item4de5d78ed6:g:ARsAAOSwRLVjLBj2&amdata=enc%3AAQAHAAAAoEgJMboZ%2B20Uf6QV0E2LNB5Qs21bpDpHcTZvz3HfNRXmQu4g79iy0yyM%2FkusIl1vK4lYiL%2FmP0gVa8ua0uDvnYWwMrCTj4pNp3jykHlekgmklPqv66UPNv8vAXQR2SyfST66Fg9tr1LmTyV9tPQcJh30LK2W1K89FbuZdwVKHIlkFBKfG6jUlQW3JkwDT8VKfEx7rHEs8TeT9kKbJGoVnOs%3D%7Ctkp%3ABk9SR6T1x8CHYQ or www.ebay.com/itm/334604966540?hash=item4de8029a8c:g:5mgAAOSwXOBjV8vv&amdata=enc%3AAQAHAAAAoIOmlJqFvhRcdr8tSXjIFpmmGHusSfSvVwHaMYdxUowGnBxo8Tl6TuSSBswTK2adxkTq%2BKk8B%2BBV%2BquuyPkpFlv8ut%2BG60aNBccv2VbCtksAybjlxacJqFJzgsHp1Fes8mzuEcVHVUbXOgJfUQ5pIL38zx8oGe708JfRl31V%2BuDYGh02FfL2kE7lx2YWDd%2FFg%2B4Z8em6kK%2FUpEDfCJaf%2BP8%3D%7Ctkp%3ABk9SR6b1x8CHYQ

Great video, now i know how it looks inside, by the way, can i hace model.or name of the glue remover? I like to remove the glue from macbook pro battery , thanks

@PBKreviews

6 ай бұрын

Thanks. www.ifixit.com/products/ifixit-adhesive-remover?variant=39915173740647

What do you reckon? does the overall engineering and build look durable for a 2 year span?

@PBKreviews

Жыл бұрын

The frame and overall build I would say is good and would last 2 years for sure, but I am not a fan of these foldable screens. I've had them crack out of no where in the crease before and I just don't feel like I would use one as a daily phone without making sure I have some sort of insurance plan on it :)

@insenjojo1839

Жыл бұрын

@@PBKreviews yes indeed, that aluminum frame looks chunky and sturdy but the fragility of that foldable display cannot be ignored...I am one of those primitive fellas who only use one device at a time...and I am a sucker for compact devices, hence I was still using my appalling battery life plagued iphone 12 mini...I have pre-ordered the flip 4....this is gonna be my one and only primary device, so I did make sure to get samsung care+ ....thanks for the teardown...

Respect🙌🙌

@PBKreviews

Жыл бұрын

👍

Used this video to repair my phone. I found one with a bad esn on ebay and used it to exchange the screen. I just took the motherboard from my phone and put it in the ebay phone. Worked flawlessly and was easier than trying to get the screen off the frame.

Nice video!

@PBKreviews

Жыл бұрын

Thanks!

Great !

thankyou

flip3 is still good? I mean, performance for a wife not so much involved in games etc? resistance to open/close? screen in general? because this is too much $

I'm getting no signal on my flip 4. Do you know where the antenna is located and how to replace it? Or how to push it down to make better contact

@PBKreviews

29 күн бұрын

There are multiple antenna, from ones in the frame, to motherboard and sun board contacts, to the plastic covers over the motherboard etc.

@tajsingh7924

29 күн бұрын

@@PBKreviews So out of all of these do you know which are the main ones responsible for 4g/5g data. I get "emergency calls only" or "No service" message.

Thanks 👍 brother

@PBKreviews

Жыл бұрын

No problem 👍

Can i use Z Flip 4 Screens to be used to a Z flip 3 as replacement? THanks

@PBKreviews

Жыл бұрын

nope it wont work

can i just remove the front glass to just replace the back hinge??

@PBKreviews

Жыл бұрын

If you mean the folding screen, you can but since the cable is attached on the bottom to the sub board, it would be more difficult to work with when you cant completely remove that screen to have room to work, on top of the fact you might damage the cable by moving it around a lot.

WoW So Good Mr From Iraq.

@PBKreviews

Жыл бұрын

Thanks!

Can the flex between the upper and lower halves be replaced.

@PBKreviews

Жыл бұрын

Yeah, you would need to cut out the cure in place gasket holding it in place with a razor but you would need to re apply a new seal with either cold glue or some sort of silicon filler to keep water and debris from getting inside the phone as well as potential for the flex moving around and getting damaged.

after any mobile cover removed look like human body organs 🤣

Nice!

@PBKreviews

Жыл бұрын

Thanks!

Test please IQOO Neo 6 missing part ☹️

@punkfan7657

Жыл бұрын

Bekar phone h woh

would love to buy the zflip 4 but man, that fragile screen is a worry..too bad theres no full body flips cases for it.

@PBKreviews

Жыл бұрын

yup

@WoodleighmallMobileArt

8 ай бұрын

have

영상 감사!

@PBKreviews

Жыл бұрын

You're welcome :)

Ok. Impresif !

@PBKreviews

Жыл бұрын

:)

YOU ARE THE BEST...

@PBKreviews

Жыл бұрын

Thanks! :)

@stevejohnp.bautista2038

Жыл бұрын

@@PBKreviews please disassemble RED MAGIC 7S PRO if you can.

@stevejohnp.bautista2038

Жыл бұрын

@@PBKreviews where can i buy an original lcd for my POCO X3 PRO if there is? I hope you can help me or give me some tips. Thank you.

1:10 did you say graphene? Are you sure? I could'nt find any details about this.

@PBKreviews

Жыл бұрын

Yes, graphene/graphite help to transfer heat.

Good job

@PBKreviews

Жыл бұрын

Thank you :)

Super thanks

@samparson9604

Жыл бұрын

The super thanks is a button you click that is like a donation.

@PBKreviews

Жыл бұрын

👍

Wow!

@PBKreviews

Жыл бұрын

👍

It's funny cuz it looks like the connection for the 5 mm wave antenna on the bottom is still on the motherboard

@PBKreviews

Жыл бұрын

Yep, well last years both ran off a single cable and connector, but yep there a slot which doesn't have a connector soldered to it on the board. I remember reading somewhere about them moving to one antenna with newer chipsets and so forth, so not sure if they changed the design last minute to go with one instead of two. Another thing I would thing was 2 would generally provide uninterrupted signal where if one was blocked by your hand, the other would kick in, but I guess the antenna is positioned in a place where usually ones hand would not be blocking it often.

Where to buy lcd screen replacement?

@PBKreviews

11 ай бұрын

Here is a link, you can scroll to the ones on the bottom which say service pack: www.mobilesentrix.com/catalogsearch/result/?form_key=qnmj5knRUiVPgs7e&q=galaxy+z+flip+4 or you can search them on ebay etc.

Give him a like, he deserves a billion likes 👍

@PBKreviews

Жыл бұрын

Thanks! :)

Hey bro, the service center contacted us, they say upon replacement of screen, battery will be replaced as well charging us 63USD for the battery. Do you know the reason for this? Thanks

@PBKreviews

Жыл бұрын

Sometimes the service centers depending on models of phones have replacement parts which come pre assembled and semi complete, meaning samsung has the parts ready to go so all they have to do is move over the motherboards and re assemble so it saves time and work.

Nice video !! How easy it is to change the front camera? You don’t do it that’s why I ask . :)

@PBKreviews

Жыл бұрын

Thanks! It's not too difficult, its just glued in with a cure in place gasket, so you would need to use an x-acto knife or razor blade to carefully cut the glue around the camera sides and gently pry out the camera.

nice😎

@PBKreviews

Жыл бұрын

Thanks ✌

Mine broke in 2.5 weeks. Posted a video. Defective.

@PBKreviews

Жыл бұрын

oh that sucks

Wow....

Good

@PBKreviews

Жыл бұрын

👍

Wow so amazing how no heat was needed 😂

@PBKreviews

Жыл бұрын

of course it's needed. I Just don't show the heating because it will be a waste of time on video and people skip through it.

literally only watched this video for screen repair, not a full teardown.

honor magic 4 pro disassembly

@PBKreviews

Жыл бұрын

Not sure if I will be doing that one, but I will look into it.

bro you better hire someone to prepare good thumbnails and new logo for your channel

@PBKreviews

Жыл бұрын

I'm ok with the logo for now, maybe when my channel grows will consider making changes to it :)

Finally the've updated the camera sensors

@PBKreviews

Жыл бұрын

:)

Wait, this one has two batteries or what?

@PBKreviews

Жыл бұрын

yeah

I'm the gadgets lover but, i'm not fan of those foldable phone actually.

@PBKreviews

Жыл бұрын

yep, neither am I. :)

Can you add a SD card slot?

@PBKreviews

Жыл бұрын

nope

disassemble a Galaxy buds 2 pro

@PBKreviews

Жыл бұрын

i will look into it

Impressively tiny Mainboard

Just the video I was waiting for, hate that phone teardown monopoly jerryrig zack fraud and his stupid "LiKe a LiTTLe LeGoOoOOooo"

@PBKreviews

Жыл бұрын

:) Glad you enjoyed it.

This is model no good 😁

the display is so expensive, just get a new phone then 😂

Haw mach

thats some bad bad cooling, no VC for this phone like it was rumored..

@PBKreviews

Жыл бұрын

The 3d graphite works just as well as a vapor chamber and as of the S20/Note 20, Samsung has been generally using the 3D graphite in place of the vapor chambers on their flagship/top tier devices.

@filippos989

Жыл бұрын

@@PBKreviews S22 ultra has nano-TIM and vapor chamber..

@filippos989

Жыл бұрын

@@PBKreviews "3d" graphite is just a graphite sheet(the one they use seems low quality tbh, plastic) hq graphite sheets are generally black.., they literally couldnt have cared less about the cooling, damn i have 5 sheets of 500x500 graphite sheets, thats how much i am fixated on cooling, dont get me wrong, it really does matter i think you also know that.

@filippos989

Жыл бұрын

@@PBKreviews theres literally nothing, not even graphite behind the screen..also TIM application on the SoC is quite shitty, what is that, a dot in the middle? LOL they didnt even try..

coin vibrator in a $1000 phone :(

@PBKreviews

Жыл бұрын

Don't always be fooled by the shape of the motor. Since z axis vibrator motors can also come in the cylindrical shape. So the shape of it doesn't necessarily mean its the old vibrator motors. However I'm not entirely sure what motor is used in the Z flip 4 so I can't dive in any further about that.

А можно по руский

first?

@PBKreviews

Жыл бұрын

👍 :)

These phones are the biggest pieces of shit Samsung has put out,a complete rip off