Just had to lightly tap mine in the spot you mentioned and it worked. Thank you very much for the help.

@JoseMoralestech

2 жыл бұрын

Officially one Tap man 😁 , blessing

@SirMatjesfilet

11 ай бұрын

thanks it worked for me too, you're a lifesaver

Thanks ,very good video💪

Thank you so much!!!

Worked for S8+ too. Thank you Sir 🎉

@JoseMoralestech

11 ай бұрын

Welcome 👍

So I have my screen replaced and the guy cut the strip.. everything is fine but where do I get the part?

Thank you so much, it worked

Hey Jose! Great video here. I have recently replaced my S20 FE charging port due to “moisture” issues. I not have the overheating error when I attempt to charge. Any ideas how I solve this? I have a similar resistor on my NFC connection flex but it doesn’t seem to match up with another metallic area. Thanks in advance, John

@liammoritz3270

2 жыл бұрын

Did you find a solution to this I have the same issue

Quick and to the point thank you!

🤣thanks, my wireless charger pad was unplugged because my phone has no back cover exposing the motherboard and cables. Just had to plug it in!

What if I don't have the nfc thingy as a whole Can I buy one at place it in

Nice,,

Thank you so much!!!!!! Took hours until I found the perfect video for my problem. ;)

@JoseMoralestech

11 ай бұрын

You're welcome!

Whats the part called

Bad connection is always an easy fix. It's a thermistor and could fail requiring nfc/wireless charge sub-assembly. Samsung should have provided a software override to allow charging when ambient temperature is below spec, the only issue is that LiIon battery should be able to be safely charged between -10 and-20

@markbonine8365

Жыл бұрын

That's -10 and -20C. The battery would simply fail to charge not overheat and flame out and might not charge after returning to see normal temperature. The Samsung problem of course, involved battery failures of a different nature causing runaway high temperature and catastrophic destruction. Samsung can be appreciated for demonstrating the dangers of some LiIon battery types.

how bout in s20 ultra im having a trouble just like this

How to open note 10 plus layer board

Great video

I have the opposite warning it says charger port too hot but new charging port and battery didn’t fix

@ironiiioxide6167

2 жыл бұрын

try replacing the wireless charging coil thing, I know that is the issue sometimes

@zacharylarrabee179

Жыл бұрын

Did you ever get that problem figured out?

Where can I get the piece from

My phone has this issue but it doesnt have wireless charging. How can i fix it?

The USB port screws are shorter than all the other screws, using the wrong screws will cause your screen to smash

@JoseMoralestech

11 ай бұрын

I always advice to keep screws in order

Hi my temperature indicator is RED. Not yellow. Can you please explain ??

@Xibit1989

2 жыл бұрын

I have the same problem, do you have a solution?

شكرا لك ، شكرا لك ، تم حل مشكلتي. كم انت عظيم❤❤❤❤❤❤

I had my phone screen replaced…. I have a galaxy m21 so idk what’s the issue here someone here pls help me out

please help me, i didnt understand what i have to do? how i can open back of it? and when i open it what should i do?? my phone is 20 plus

@wadeallman452

3 жыл бұрын

You must have a heat-gun and the proper tools to remove the back without cracking it. It can be a high-stress repair just from getting the back off. This is mildly advanced job and should be taken to a professional to do so. My recommendation is Batteries Plus, as most stores are Samsung Authorized Repair shops, and are able to order parts straight from Samsung.

@KentRoads

Жыл бұрын

Use a hair dryer and guitar picks, don't need to worry about ripping and cables removing rear of 20 series

@zacharylarrabee179

Жыл бұрын

@@KentRoads gangster. You know the other guy I a tech, with that "subtle" plug

Is it possible, please, that the S22 Ultra has a similar problem?

@657Crew

Жыл бұрын

Yes. Common for all galaxy models

🌡 Settings *Charging stopped* Your phone's temperature is too low. Charging will continue when the temperature returns to normal.

So... Just take it apart and put it back together?

@JoseMoralestech

10 ай бұрын

yes

@Bapuji42

10 ай бұрын

@@JoseMoralestech Dude it worked. I didn't even remove the screws either.

what is the valu of that resistor???

@JoseMoralestech

Жыл бұрын

sorry i dont have that info

🌡

Sorry but this didnt fix my phone it keeps saying the yellow triangle of death

@JoseMoralestech

10 ай бұрын

OMG

@93goldentoad

9 ай бұрын

I watched another video that said it can be a software glitch. Mine is doing the same so im looking at all these videos I can, gonna start with the easiest and most common issue before I open it up good luck

@dimitrigalbreath2259

Ай бұрын

I had the issue where the z fold 4 would not charge and the gray circle, with the gold triangle within the gray circle, with the red thermometer inside the gold triangle. I needed to utilize smartswitch to remove my info but the charge was initially 1%. I utilized the charging/transfer cable between the new phone and the phone with the issue. I literally placed the phone with the low temperature message in a heating pad and utilized the high temperature but temperatures will vary on the heating pads. And a few minutes later, I was surprised to see that the charge rose to 2%. It eventually increases to 35% and I was able to remove all of my info via smartswitch. Hope this helps.

@dimitrigalbreath2259

Ай бұрын

I had the issue where the z fold 4 would not charge and the gray circle, with the gold triangle within the gray circle, with the red thermometer inside the gold triangle. I needed to utilize smartswitch to remove my info but the charge was initially 1%. I utilized the charging/transfer cable between the new phone and the phone with the issue. I literally placed the phone with the low temperature message in a heating pad and utilized the high temperature but temperatures will vary on the heating pads. And a few minutes later, I was surprised to see that the charge rose to 2%. It eventually increases to 35% and I was able to remove all of my info via smartswitch. Hope this helps.