Samsung Galaxy A13 - Screen replacement [repair guide + reassembly]
Ғылым және технология
The screen of your Samsung Galaxy A13 is broken? In this video we show you how to replace it on your own. With easy-to-follow instructions, macro shots and detailed steps we support you throughout the whole repair process.
📱 Find the original replacement screen for your Samsung Galaxy A13 in our online store:
idoc.eu/yt-en/57606
🔧 Our Samsung tool kit contains all tools you need for your repair:
idoc.eu/yt-en/55970
Don't want an entire set? Our recommended tools are:
- Phillips PH00 screwdriver - idoc.eu/yt-en/11543
- iFlex opening tool - idoc.eu/yt-en/55670
- iPlastix opening tool - idoc.eu/yt-en/56203
- plastic pick - idoc.eu/yt-en/56853
- ESD tweezers - idoc.eu/yt-en/1346
- spudger - idoc.eu/yt-en/11270
- battery spudger - idoc.eu/yt-en/11290
- suction cup - idoc.eu/yt-en/1347
- magnetic pad - idoc.eu/yt-en/11118
- heat gun - amzn.to/2nMBZPP *
📷 Find our detailed photo guide here:
www.idoc.eu/guides/en/samsung...
✔️ To make sure your repair was successfull we recommend that you test your smartphone BEFORE and AFTER the repair. Our checklist can help you: www.idoc.eu/blog/wp-content/u...
Table of contents:
00:00 - Intro
01:06 - Turn off the Galaxy A13
01:17 - Remove the sim card holder
01:24 - Remove the back cover
01:47 - Remove the upper board cover
01:55 - Disconnect the battery
02:05 - Disconnect the fingerprint sensor
02:14 - Disconnect the connector cable
02:23 - Remove the battery
02:58 - Remove lower board cover
03:11 - Remove front camera
03:19 - Remove the antenna cable
03:41 - Remove the mainboard
03:50 - Remove the USB board
04:03 - Remove the vibration motor
04:21 - Prepare new display
04:30 - Insert the vibration motor
04:36 - Insert the USB board
04:50 - Insert the mainboard
04:59 - Connect the antenna cables
05:15 - Insert the front camera
05:27 - Attach the bottom cover
05:37 - Insert the battery
05:43 - Connect the connection cable
05:52 - Connect the fingerprint sensor
06:00 - Connect the battery
06:10 - Attach the upper board cover
06:19 - Test the replacement screen
06:47 - Attach the back cover
06:55 - Insert the sim card holder
#screenreplacement #smartphonerepair #samsunggalaxy #galaxya13 #idoceurope
__________________________________________________________________
On our website you will not only find the right repair manual for your smartphone model, but also original spare parts and high-quality tools:
✔️ www.idoc.eu/guides/en
📱 www.idoc.eu/en/parts/
🔧 www.idoc.eu/en/tools/
Interested in our German videos?
Check out our channel: www.idoc.eu/youtube
You can also find us on Instagram and Facebook:
/ idoceurope
/ idoceurope
Our equipment:
Camera: amzn.to/3TBYsME*
Lens for close-ups: amzn.to/3q8Nj8s *
Lighting: amzn.to/3B6K7kc *
(Links marked with * are affiliate links)
Пікірлер: 10
Thank You, I just finished replacing a cracked screen I couldn't have done it without the help your video supplied thanks again 👍
excellent ho to videos,Thank You!
Cool
what about the metallic cube near the vibration motor?
what would you suggest max battery temperature? i have 3d printer and heat bed is the only 'HOT' tool i have, apart from a blowtorch 🤣
After replacing the screen and making sure everything is put back correctly. I put the back cover . When I Press on it does not turn on but when I connect a battery phone charger it has the battery charging symbol on screen without charging. Only once or twice has the battery started charging correctly but I'm unable to turn on the phone . Unless the charger is in . Do I need a new battery ?
@LandoCalani
8 ай бұрын
Prolly the motherboard isn't properly pressed against the flex power. If this is the reason, try applying pressure to the motherboard against the power flex, even unevenly, and see if it will turn on while you keep pressing on.
So you don't show yourself reapplying any glue?
why not delivery in irlande
@iDocEN
Жыл бұрын
Hi Isaac, unfortunately there was a mistake on our homepage. We offer delivery to Ireland. This should now work again. Best regards Marc from iDoc