Thank you, Daniel. I was able to take my fan out, oil it with Q20, turn it by the hand for a few minutes (to get the oil to penetrate the fan mechanism) and now the original fan works just fine. What a relief!

Thank you for doing the video. I opened up the player and removed fan and blew out dust with compressed air. Reinstalled the fan and works! Thanks again.

@averageguycameron7692

5 жыл бұрын

Robert Payne thank you for the comment. I’m glad it helped. Mine is still working and it’s goin on 2 years now.

Thanks to the comments of others I cleaned the fan with compressed air and cleaned it with isopropyl alcohol paying attention to the alcohol entering the fan. This worked for me, the problem was resolved. Another satisfied customer of this video.Thanks so much.!!! Life is better if you share it.

Thanks! So far, this simple fix cured my issue.

Great video - short and sweet. Thanks for posting it!

Thank you for posting this! Like others commented, I took the fan out (thanks to the video) and blew it out with compressed air and now the error is gone. Been 1 week, if it fails again I will order the replacement fan.

@mintymus

2 жыл бұрын

Another thing you can do is drill a few holes in the plastic above where the heat sinks are. If Samsung would have just put a few small vents on top, it likely wouldn't even need a fan.

Thanks for the great video which is very helpful. I did as some others did. Took the fan out and cleaned it with compressed air and cotton buds. It worked. I've ordered a replacement from China for £5 - - - just in case!!

Thanks Daniel. I took out my fan, cleared the dust and now it is working again as usual. The only problem was that I needed to do some delicate and patient adjustment on the fan position to avoid a disturbing vibration sound... some 10 minutes also. No idea where the weird vibration came from but the best way I could think of is to avoid it rather than tampering anything else. You save my day, bro 👍👍👍 My problem has been for the past 6 months. Hardly can find a technician willing to take the case, and so after watching your video, I decided to take it into my own lucky hands 🤣

@averageguy9630

Жыл бұрын

I really appreciate your comment!

I had "cleaned" the fan 2x. Still happened but not as frequent. Bought a new fan and it has been running all day (for now) Simple to do thanks.

THANKS for the video. It helped me a lot. :-) In my case the plug was even the same and just plugged in nicely - ordered the fan from Amazon Germany. But the German version had no screw thread in the little fixation holes on the fan edges..

Cleaned the original fan with Electronics cleaner even though the unit had maybe 20 movies on it. But that's seemed to work. Double check amazon for the part I just ordered. As long as they ship what's in the picture Its a direct fit. No need to have to mess with soldering or stripping wires. " Samsung SMGHTH6500WM/ZA FAN-DC BRUSHLESS MOTOR". Thanks for the Video. I had a feeling it was a simple fix. Thanks to Samsung for at least letting you know where to start with the fan NG message. I fixed this for my father in law. I had a feeling it was common since the Unit had so little hours on it. Its a Samsung UBD-M7500

Thanks bud. This just happened to me in a lightning storm. Buying a new fan now :)

Firstly, thanks for explaining what Fan NG means! I guess this will be a quick fix for me if I can find the fan in Aus!

My tests have shown that "Fan NG" is rarely due to a defective fan! Rather, its cheap connector is responsible for this, as it loses contact with the pin on the motherboard over time and due to temperature fluctuations. This is especially noticeable with the blue cable, which transmits the signal of the fan control (or not, then see Fan NG). Here you can unplug the connector from the motherboard, clip the metal pins out of the connector with a fine slotted screwdriver and use a small pair of pliers to bend the very cheap metal back together a bit tighter so that it ultimately closes tighter around the pins of the motherboard again. Very simple solution to an insanely common problem.... Optionally, you could of course solder a standard fan connector on the motherboard and replace the fan accordingly, then should be even longer peace.

@Samiby

Жыл бұрын

This sounds about right. pwm signals are so finicky when the system likes to have specific rpm reported back that are'nt occurring due to bad contact or lack of lubricant

@ozzie.freddo3972

Ай бұрын

@@Samiby I'm wondering what frequency I should be seeing on the PWM. I'm getting 35-38Hz.

@ozzie.freddo3972

Ай бұрын

interesting suggestion...might try bypassing the connector.

Thanks Daniel. Just completed the fan replacement. $30 is better than $600!

Help me please any quation ? What the componet 15c07 ? Or is transistor final

I cut the blue wire and now my fan is at 100% speed but it seems to fixed the problem. No more fan ng.

What causes the fan to be no good cuz I have the same issue that happened today

Does the fan run constantly ? Or just when it gets hot......many of the newer players don't even include a fan.....

Thanks for the information my friend, on your next video kkep in mind you should record your video with your cel phne horizontally not vertically in order to see a wide video bigger, thanks anyway

I had this same problem replaced the fan, even though it lasts longer turned on before getting the fan-ng warning, I do still get it

my fan does not work as I can adapt as your video in the new

Can you please write the code number to look search on Amazon for the same Fan

Hello man, this fixed the Fan issue I had, now I have PROTECTION message. Any ideas.

I have a normal Samsung home theater system similar insides as yours, it older so i just wanted to clean the fan. It looks similar to yours. Just wanted to know if the fan blows air "into" or "out" of the unit?

@NAVPCRESTORE

2 жыл бұрын

It would be blowing the warmer air out.

@IkeMan4

5 ай бұрын

Sure about that? Wouldn't you want to draw in cool air to cool off the warm components?

Mine is a sAMSUNG ht-f6530w. aNY SOLUTIONS ?? Would like to know: Why do I have no sound ? Tubes are off, even when I switch te system on. What could be wrong. Living without sounds is not correct.

Good video, thanks for sharing. I have the same problem but all the fans are working fine (case fan & cpu fan). Shame on Samsung

Is the new fan also very loud, noise zooooom? I want to fix that problem.. Thank you

I have same problem, but my fan still working. But i got FAN NG message, amplifier turn off automatic over 1 minutes

@typiklb

6 жыл бұрын

Use compressed air and blow out the fan. It may just be struggling.

Thanks for this, mine is giving that error.

Champion!!

Thank you

Cleaned it, didn't work. Bought a new fan, didn't work. Still fan ng

@bliblabl8149

2 жыл бұрын

Try turning the direction of the fan from blowing out to blowing air in.

Thanks I will try this. I first noticed it when volume turned high I would hear the fan then see fan Ng. I assumed it said fanning meaning it's cooling it down. Now it's stop it come on for 20 seconds then fann NG. Then auto off. 15 seconds later. I'm researching the fan for replacement. Can you also share you fixes success. I will also get back. Mine is blu ray 5.1 sound system. HT F5550

@averageguy9630

2 жыл бұрын

It’s been a few Years and it continues to work well.

You can just cut the blue wire of the FAN. This will avoid the use of the PWM control. Worked for me (Samsung HT-4505).

@averageguycameron7692

5 жыл бұрын

Leonardo Barros Thanks, if this one ever dies, I will try that first!

@johnluke5478

5 жыл бұрын

There is no Blue wire

@leonardobarros4949

5 жыл бұрын

@@johnluke5478 Maybe the color is not the same. You will need a multimeter to check de voltages on the board. Probably will be VCC (12V), GND, Sense and PWM. If you remove the PWM the cooler will rotate at maximum.

@rangamakwata9208

4 жыл бұрын

Thanks. Solved my problem with HT-F6500W on 28 Mar 2020

which way is the fan supposed to face?

@dylanBehrproductions

5 жыл бұрын

anne mcarthur the fan blades face towards the inside of the amp, where the sticker is and where you see wires faces outward of the receiver

Great video but could you include a link for the fan in your comments please so I get the right fan. You know more what you are talking about!!

You could just cut the blue wire off and solder a resistor on red or yellow wire to turn down the speed fan, simple fix for about 30 cent's (for resistors)

This unit won't operate without the original fan installed....available at Amazon for 9.97 as G5015M12D1+6 5cm 4line temperature control 0.2A 12V car audio cooling fan

Thank u man ! I have the same problem and i order a new fan from ebay it cost me 10€ i hope its gonna work for me !

@averageguycameron7692

6 жыл бұрын

Mikael Koho Just as an update, mine is still working after several months!

@emanuelbarrios3075

6 жыл бұрын

Would you give me the link please to buy this cooling fan.

@mikaelkoho6901

6 жыл бұрын

I mean it did work *

@emanuelbarrios3075

6 жыл бұрын

Mikael Koho I need to buy this cooling fan please would you give me the link to buy it.

I'm having the same problem, where can I buy the piece? Please give me a market to sell, Thanks 🙏🏻 ♥️

@robertpayne9282

5 жыл бұрын

Amazon

@mintymus

2 жыл бұрын

@@robertpayne9282 I don't understand, they sell these in the Amazon rain forest?

My Samsung blu-Rey off when playing ...

You don't need to replace the fan. Just open up the lid and remove the cord which connect the touch buttons from the front.

@TheManBehindTheSlaughter6669

2 жыл бұрын

then how does that keep it from keeping you from accessing the extra sound effect options?

@BurlacuM

2 жыл бұрын

@@TheManBehindTheSlaughter6669 you can use the remote control.

@TheManBehindTheSlaughter6669

2 жыл бұрын

@@BurlacuM well no, because when it starts saying Fan NG on the console, even using the remote it doesn't let you use the sound effects button, it just starts saying DSE off, DSLII off, and DSP off when you press it.

I forget which way does the fan face

@averageguy9630

2 жыл бұрын

It blow the air outward

Yo solucione este problema con una secadora de pelo, la colocas en el ventilador del blu-ray y listo.

Always a worry when cello tape is in the

Is anyone having trouble running KZread videos on their samsung smart Blu ray ? Mine just loops in a black screen, funny thing is, youTube plays the Ads FINE! but as soon as the video is about to play - loops.

If u have a fan NG error just remove and re plugin ur AV cables

Nice vertical video...

A

Like I need your life problems

DONT BUY A NEW FAN, DONT EVEN OPEN THE PLAYER. grab your vacuum hold it on the fan for 5 seconds. Problem fixed your welcome

@ragnaraxelson59

4 жыл бұрын

Old bull principle ^

@bliblabl8149

2 жыл бұрын

No. Vacuuming doesnt fix anything here!

Trash , dont see nothing!

Playstation was so much better... 🎮🎫📀🎴📡

Thank you