Sample procedure for Dead Element Check on PAUT probes
Dead Element Check sample procedure for Phased Array Ultrasonic Testing Probe from Olympus Inc.
Жүктеу.....
Пікірлер: 7
@NDTVideoLibrary5 жыл бұрын
Download the Phased Array App from google play store. Just search "PAUT Buddy" or follow this link: play.google.com/store/apps/details?id=com.saurabh_lawande.NDT
@jeffersononetwo6 жыл бұрын
Excellent. I've been performing this for >15 years on OmniScan MX/2 and most often using the Focus LT. The only thing I do a bit different rather than looking at the backwall, I will set the Time Base Start to -0.100in ... rather than zero I will start negative to see all of the top surface. This works great in immersion with Focus LT & TomoView and the same principals apply as you've shown here with the OmniScan. I use this to also verify the Height to First Element with water wedges & Focus LT. This technique will satisfy ASTM-E 2491, Annex A3 and ASTM-E 2700, 8.1.1 for Zero Depth Position. Great job presenting this!
@NDTVideoLibrary
6 жыл бұрын
Jefferson, thank you so much for your kind words! Your technique sounds great! Thank you for sharing knowledge, I truly appreciate it. This is what this channel is for.
Пікірлер: 7
Download the Phased Array App from google play store. Just search "PAUT Buddy" or follow this link: play.google.com/store/apps/details?id=com.saurabh_lawande.NDT
Excellent. I've been performing this for >15 years on OmniScan MX/2 and most often using the Focus LT. The only thing I do a bit different rather than looking at the backwall, I will set the Time Base Start to -0.100in ... rather than zero I will start negative to see all of the top surface. This works great in immersion with Focus LT & TomoView and the same principals apply as you've shown here with the OmniScan. I use this to also verify the Height to First Element with water wedges & Focus LT. This technique will satisfy ASTM-E 2491, Annex A3 and ASTM-E 2700, 8.1.1 for Zero Depth Position. Great job presenting this!
@NDTVideoLibrary
6 жыл бұрын
Jefferson, thank you so much for your kind words! Your technique sounds great! Thank you for sharing knowledge, I truly appreciate it. This is what this channel is for.
Good job!
@NDTVideoLibrary
7 жыл бұрын
Thank you, Emmett.
👍