Safe parallel charging with the HGLRC Thor Pro 6 port parallel charging board.
Today we are looking at a 6-port parallel charge board from HGLRC. I used to be a bit scared of parallel charging because of some incidents with some cheap board with no protection. The Thor boards aim to make parallel charging as safe as it can be, so let's go through some of the do's and don'ts of parallel charging as we look at the product.
(if you are a regular viewer and are wondering where I've been for the last month and a half... the answer is "mostly ill")
If you want to check out these products in more detail, here are some links.
Thor Pro 6 Port - www.hglrc.com/products/hglrc-...
Thor Pro 4 Port - www.hglrc.com/products/hglrc-...
If you liked this video and want to show your support please feel free to join my Patreon supporters here / currykitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it www.banggood.com/?p=E81211714...
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here www.currykitten.co.uk/support-me/
Пікірлер: 32
Fantastic review and tips, Wayne! Thanks! 😃 I have the first version, it's freaking great! Stay safe there with your family! 🖖😊
@CurryKitten
Жыл бұрын
Cheers MC - yep, the original is a cool little board. Mines not going anywhere :D
Very good boards. At 8:50 you mention the red light and no protection. On the back of the board is stated: "Battery Balancing Connector Protection: There is an indication of LED when Self-resetting in short circuit situation in thermal fuses between every balancing pin.". If I'm correct every balance wire is protected by a Poly-fuse, mounted on the back of the PCB. The fuse comes in if they overheat. After cooling down they work again.
@CurryKitten
Жыл бұрын
It does say that, but I tested it by leaving the short circuit connected for a few minutes and I managed to get some smoke out of it - which seems that the protection could be better
@ApappieK
Жыл бұрын
@@CurryKitten Thanks for the warning. From the 1000 times of charging there was 1 time when I was distracted during plugging the connectors and the red LED and the large fuse saved my LiPo packs.
Great topic, thanks 👍
Excellent review. Today I still have a great hesitation to using parallel charging ports. But I certainly see the advantage. I currently have several chargers that will do four batteries simultaneously.
My buddy also does his charging in his grill. Great video, thank you!
@CurryKitten
Жыл бұрын
Great idea, and if it goes wrong, his BBQ is already lit :D
Good video, thanks for the tip about the balance leads. I just hover in my room for about 3 minutes to discharge. I cans see the Velcro fuzz on the back of your batteries.Do you use Velcro on your drones? Or do you use these batteries for your goggles ?
The THOR rocks! Love this company. They make high quality and i appreciate that 👍👍🇺🇸🔥
Thanks very helpful I fly avata but thinking of getting aos 3.5 4s fpb drone. I have m4 lipo charger a bit small but it will do.
thanx for the refresher ++++
@CurryKitten
Жыл бұрын
No worries!
Thanks for the video! Do you think the HOTA D6 Pro could charge 9.3A for parallel charging 6 1550mah lipo HV at the same time?
@CurryKitten
Жыл бұрын
I think so, I don't have one - but looking at the watts per channel, I think they could do around 10ish Amps at 6S voltage
Is this better than the Strix Ultimate?
hey if I have 5x1500mAH and 1x1050mAH battery does that mean I can set the charger to 5*1.5+1=8.5C? theyre all 6S
@CurryKitten
Жыл бұрын
Although it may be possible to do, I personally would mix my capacities of lipos, so I'd charge the 5 x 1500mAh at 7.5A to stay at 1C and charge the 1050mAh seperately
@RookieRay
Жыл бұрын
@@CurryKitten thank you :)
How does balancing work while parallel charging
@CurryKitten
14 сағат бұрын
All the cell 1s of each battery are treated as 1 big cell. Ditto with the other cells. This is one of the reasons it’s important that all the cells in all the batteries are within 0.1v of each other
Checking batteries are balanced pre charging?. None of mine are...and you storage charged them to make them suitable candidates for parallel charging..?...Did I miss something...🤔😳😳🇬🇧
@CurryKitten
Жыл бұрын
Yeah - I did cover that. Each cell on each lipo needs to be within 0.1v of each other and I mentioned storage charging my lipos so that I'd expect them to all be suitable. Or are you saying something else ?
@EnglishTurbines
Жыл бұрын
@@CurryKitten No, you covered it perfectly. This is why I don't do parallel charging...I was just checking I had it right...🤔🤔😳😀
@CurryKitten
Жыл бұрын
Yeah - there's a lot to be careful of. Extra time and attention is needed
I need 8 ports.
@CurryKitten
Жыл бұрын
Not sure if I've seen an 8 port parallel charger, but I've used 2 parallel charge boards into a dual port charger before
Heloooo Chris
@CurryKitten
Жыл бұрын
What's up Gary?
@gerrysquire
Жыл бұрын
@@CurryKitten waiting for summer. How's your knee?
@CurryKitten
Жыл бұрын
Pretty good these days thanks