😃awesome!! Great video!! Shoutout to your wife!!👍 🐾🐈🐈‍⬛🐾👏👏👏👏

simply wow! thanks a lot for sharing 👍

I had a feeling you were going to be carefully unstacking the dials when you first started talking about what you were exploiting. I have been looking into this as an option for cracking S&G 8077's and 8088's. Theory being when you hit the area of the right number that it will shift the wheel pack slightly when you tug the shackle, but as yet I have not been able to get that to work, stiffness in the dials has interfered just a little too much to get that accurate a reading. I have been able to get them cracked open with other means though, especially using a shim down the shackle, though the 8077's seem to have a real vulnerability to decoding the 3rd digit.

Keep em coming.

Great video man, very informative.

That’s amazing

Se agradece tu capsula historica-informativa .

@safecrackerbot9742

6 ай бұрын

Your historical-informational capsule is appreciated.

@safecrackerbot9742

6 ай бұрын

Thank you sir!

I can’t remember the last number to my graffunder safe. If I do my normal first two combinations and get back to 0 to go for my 3rd number can I go every 2 numbers and move back towards 0 until I find my 3rd and final number to my combination?

@safecrackerbot9742

Жыл бұрын

Correct. Just dial the first two normally and rotate once (if its a gate drop, and start at zero (or 15 if you want to do a third number skip) and check the gate or each second number. Should be pretty straightforward...

If the gates from the 1st and 2nd wheel are already under the fence then why just not backdial the 3rd wheel until the gate is under the fence again, or did I miss something?

@safecrackerbot9742

9 ай бұрын

You can. But sometime you bump the wheel and ita oit of alignment.

@Magicspirit11

9 ай бұрын

@@safecrackerbot9742 what you mean by 'bump the wheel'? If you are careful and just backdial CW in increments of 2, go back to check the fence it should be fine. Thanks for the heart ;)

@safecrackerbot9742

9 ай бұрын

So, its possible to just dial the third wheel and check the gate. I just perfer to rexord the position of the wheels and them dial. But you are correct. You can just try the third wheel.

@Magicspirit11

9 ай бұрын

@@safecrackerbot9742 yeah that's what I always try first because I can't feel nor hear a wheel pick-up. I am already glad that I can feel/hear the nose against the drive cam. LOL

I have a chance to get a couple safes for free and they are OPEN but with no combinations. Can I just turn the dial and watch the back and get the combination that way?

@safecrackerbot9742

8 ай бұрын

Absolutely. That isnhow I confirm the codenwith my autodialer. It can drift over a couple days and even though it opens the safe, the combo may be a couple numbers off. Just dial normally and when a gate lines up, check the dial number. Email me if you need help

@freddyg9026

8 ай бұрын

@@safecrackerbot9742 Awesome thank you for confirming my thoughts...great video by the way.

@MrJackcorgi

Ай бұрын

If you're open then should be able to access the inside lock cover,remove and visible see where the gates line up. And fire out which wheel is the first,second,third,etc.

What if you don’t have the code

@safecrackerbot9742

5 ай бұрын

For the quick crack, the dial cant hav3 been moved since the last time it was closed. If its been moved, you have to use the standard manipulation technique

Hello I'm a fellow locksmith too. So what if the last person tried all 3 numbers again in the combo a few more times and was wrong on one or more , or all of the numbers in the combo, and the wheel pack is now on way different numbers. Will this method still work ? If so where do you start now, if not then can you figure it out by still starting on the 3rd wheel until you pick it up then feel for the gate drop? And continue the process?

@safecrackerbot9742

Жыл бұрын

No. If you move the wheels from the correct combo, it wil not work. This method relies on the dial not being moved since it was last closed AND the person that closed it not turning the dial three times. If these are the case, you need to use the standard manipulation method. Here is a link: kzread.info/dash/bejne/qZyC2bOAirbXeM4.html

What do you do when the combination isn’t working anymore?

@safecrackerbot9742

3 ай бұрын

I manually crack. If that doesnt work I put the dialer on it. The mechanism is extremely reliable. Iv3 had bery few that had a damaged mechanism our of regular use

Can you help me with my safe we just acquired that hasn’t been open since 1940???

@safecrackerbot9742

7 ай бұрын

Oh wow. Id love to help. Email me: contact@scobieworks.com

@TheShoeChef

7 ай бұрын

SENT!@@safecrackerbot9742

Also how did you know it was clockwise to open?

@safecrackerbot9742

7 ай бұрын

Its was a gatedrop dial. All ive cracked are all CW to open

Quick crack car wash

seemingly confusing and contradictory

@safecrackerbot9742

Ай бұрын

I tried to explain but mayne not as clear as I'd hoped. Sorry if it was confusing

Why were you going to zero?

@safecrackerbot9742

7 ай бұрын

Check the gate

@SulphuricAcidForTheSouL

7 ай бұрын

@@safecrackerbot9742 thanks. I'm an alarm and CCTV guy. I get asked about safes all the time.

@SulphuricAcidForTheSouL

7 ай бұрын

@@safecrackerbot9742 why zero to check the gate?

@safecrackerbot9742

7 ай бұрын

Arpubd zero is usually the gate. Actually between 10 and 14 but you have to turn past zero to see if the gate has dropped

I need help that didn't work

@safecrackerbot9742

Жыл бұрын

You will need.to do the standard manipulation method. I have a tutorial on that. What type of safe are you needing to open?

@safecrackerbot9742

Жыл бұрын

Feel free to email me