S1E1 MSFS 2020 Ultra Realistic setup.
Flying from KMYF (Montgomery Field Airport) to KCRQ (McClellan-Palomar Airport) using a ultra-realistic flight simulator setup and PilotEdge is an experience that offers unparalleled immersion and realism.
Before taking off from KMYF, you'll need to complete all of the necessary pre-flight checks and procedures to ensure that your aircraft is ready for the flight. This includes reviewing the weather conditions at both airports.
Once you're ready to go, you'll need to contact PilotEdge, a network of live air traffic controllers, to request IFR clearance. They will provide you with any necessary instructions and clearance to proceed.
As you make your way to KCRQ, you'll need to navigate through airspace and follow all of the rules and procedures of real-world aviation. This includes maintaining proper communication with air traffic control, staying on course and at the correct altitude, and avoiding any potential conflicts with other aircraft.
The ultra-realistic flight simulator setup will provide you with a highly detailed and accurate representation of the aircraft and its systems, as well as the surrounding environment. You'll be able to experience everything from the cockpit view to the sounds and vibrations of the aircraft as you fly.
Overall, flying from KMYF to KCRQ using a ultra-realistic flight simulator setup and PilotEdge is a truly unique and exciting experience that allows you to test your skills as a pilot in a safe and controlled environment.
Hardware
FlightSimBuilder G1000 Suite
FlightVelocity Panel
@FlightVelocity
flightsimbuilder.com/
ATC
PilotEdge.com
@pilotedgeATC
Пікірлер: 43
Great flight. I love those avionics. Great immersion with the G1000
@flightsimbuilder1
Жыл бұрын
Thank you!
Really awesome low profile setup!
@flightsimbuilder1
Жыл бұрын
Thank you! I really like it as it's so easy to convert back to a working table
awsome flight! thank you!
@flightsimbuilder1
6 ай бұрын
Thanks! I’m glad you liked it
it is amazing what one can do without a yoke, rudder pedals and physical engine controls
Love this. But you NEED to add audio to really immerse us - it's like a silent movie.
@flightsimbuilder1
Жыл бұрын
Thank you Emile and it's a good point. I'll turn the audio volume up in the next video.
I have 1 flightsimbuilder G1000 for PFD. They are awesome, but I need a second one for the MFD. That panel would work great with my Virtual Flight Yoko+ and V3rnio. I would also need to more monitors for the outside view.
Sensacional.
Great setup. Are you using the G1000NxI from Working Title??.I'm looking forward for its final release this month. I do not like to gamble with Beta tests. Where did you get your panel. Thanks and congrats.
@flightsimbuilder1
Жыл бұрын
Thank you! Yes, I’m using WT nxi, it’s great. The panel is from FlightSimBuilder.
Amazing! How did you setup the side screens to have an image aligned with the main screen (considering that they have different sizes)?
@flightsimbuilder1
Жыл бұрын
Thank you! I used MSFS multi screen setup, it allows you to align the screens the way you want to.
@arrebitt
Жыл бұрын
@@flightsimbuilder1 I got it!! But, which settings besides lateral rotation to match different size screens? Vertical Rotation. I guess?
@flightsimbuilder1
Жыл бұрын
@@arrebitt correct, you would need to adjust both. Those screens are the same size btw, they just at different height
@arrebitt
Жыл бұрын
@@flightsimbuilder1 Cool!! I didn't notice they are the same size. Thanks for the tips and congrats for your really nice setup!
❤ 0:17
What is name of plugin for more realistic streets?
What size are your screens?
What software are you using to connect the sim to foreflight?
@flightsimbuilder1
Жыл бұрын
I use FS2FF, it's a small free add-on and it works great
Does that g1000 glass panel work on all aircraft in the flight sim?
@flightsimbuilder1
Жыл бұрын
Any aircraft with G1000
The ATC voice interaction……is this built in MSFS via a microphone or third party app? Ta
@flightsimbuilder1
6 ай бұрын
It’s Pilot Edge, great service. There is also a free version called VATSIM
@miket3445
6 ай бұрын
@@flightsimbuilder1 Ahhh…..OK have heard of them both but never delved into them in any detail…….thanks for your reply……I must say your G1000 setup is very realistic…..amazing how good reverse engineering has become!
hello , how can you connect 5 screens to compuer? (3 screen for simulator views-Front/Right/Left views and 2 screens for G1000s)
@flightsimbuilder1
Жыл бұрын
I have three main monitors connected to GPU and the G1000 connected to motherboard. I still have a few ports available on the GPU
@asklapios
Жыл бұрын
@@flightsimbuilder1 thank you for yor answers and which GPU have you got?
@flightsimbuilder1
Жыл бұрын
@@asklapios no problem. RTX 4090
@asklapios
Жыл бұрын
@@flightsimbuilder1 thanks a lot , i got 3060 and i think it can handle it,huh?
@flightsimbuilder1
Жыл бұрын
@@asklapios the sim is still pretty CPU heavy so better CPU will play a bigger role but should still be fine
What app is that you're using?
@flightsimbuilder1
Жыл бұрын
It's ForeFlight which is also for real world flying. There is also a similar but less expensive version for flight simulator called Navigraph
How do you run 5 displays? 4 displays from GPU and one from onboard video???
@flightsimbuilder1
Жыл бұрын
3 ports from GPU runs the main monitors and 2 from motherboard for G1000 so there is one spare in the GPU
@MyChannelForever
Жыл бұрын
@@flightsimbuilder1 I have a similar set up where I use 2 touchscreen monitors as an instrument panel. I also have 3 screen setup like yours, so in total 5 screens just like yours. However I connected the right monitor to GPU because I am using GPS pop outs on the right monitor, and left one is just using Air Manager instruments. I thought running the right one on GPU would be a better performance. Is there a reason why you decided to connect both of them to on-board graphics instead of one to the GPU? Would it be better performance?
@flightsimbuilder1
Жыл бұрын
@@MyChannelForever so since I'm running 3x monitors for the sim itself, I wanted to have GPU handling this load. The G1000 popups don't need much so I decided to run them on the motherboard. It works quite well and I believe better than I tried to run it off GPU as well (at least one as I only have 4 ports on GPU)
what?
"promo sm" 👌
Holy ear rape when I opened the video jeez