I’m going to do the CP three conversion kit on my on my 16 LML and I’m also doing a full delete does that make it easier to do the conversion kit and since I’m going to delete it I just get the no tunes needed one without the ninth line

Do these replacement cp3 pumps have the same pressure as the cp4’s going to the injectors?

Do you have a CP3 conversion for the 2016 Ford 6.7 thanks

Have you made a kit for the 2019+ Cummins yet?

Will the cp3 add power? With proper tuning?

I have a deleted lml with the stock cp4 pump. I live in florida, and I don't want to have to get it tuned. what pump should I get and how much is it?

Hello S&S, what is the part # for the CP3 kit, second from the left, that is a modified pump/no tune required *without* the 9th injector line?

Does the 4th one need programming

What's the max hp limit on the cp3 pump with 9th injector? Looking to purchase something like that for emission tuned lml duramax.

Kk mentioned findin dealers fer the cp3 pumps and not seein a link in description

i have a 2014 LML, is this a bolt on plug and play unit? there are several listed on your site, which one would work best? my truck only has 44K miles on so on the fencepost on should i replace it.

Can i get info for a tune free pump on truck that has been deleted?

Great Video. I was thinking when I do a Stealth 64mm turbo from Duramaxtuner they said I need the Exergy 10mm CP4 pump. Which one of these CP3 would I need?

@heberclementiii6788

4 жыл бұрын

SS Fueled Thank you for getting back to me . So if I went with your 10mm CP3 what power output is that capable of? Or your carb compliant CP3 conversion what is the maximum power output for that one ? trying to stay fully compliant with the Stealth64 the power range should be 620 to 650. With the 10mm CP4

We Ford 6.7 owners need a conversion too!!!

@SSfueled

Жыл бұрын

Hello Tom, we unveiled our Ford 6.7L DCR Pump Conversion on Wednesday at 10:00 AM. How's that for quick service? You can find the video here: kzread.info/dash/bejne/moKMq6pmerHNY5M.html

@tomroe7715

Жыл бұрын

@@SSfueled badass, you will be hearing from me.

I want to order one but im not sure if i need the 50 state one or what the diffrence is

@SSfueled

9 ай бұрын

The 50 State has a dosing line for emissions equipment and is what the vast majority of trucks will need. The No Tuning Required will have the same pump curve as a CP4, but it is for competition vehicles that will never be driven on the street.

Does running a CP3 at CP4 pressure cause excessive wear on the pump?

@SSfueled

Жыл бұрын

Great question. Even though the CP3 is an 1800-bar-rated pump, it will handle much more than that without excessive wear. The rating is related to pump efficiency and a CP4 has less leakage at higher pressure due to having a smaller bore. Even though the CP3 is slightly less efficient at pressures above 1800 bar, it can easily maintain pressures that exceed 2500 bar and still have better durability than a CP4.

Hello there. I recently installed the cp3 stock 50 state compliant pump from your company. If I want to do a emission compliant tune, will the stock cp3 do that or do I need to change to a different pump?

@SSfueled

Жыл бұрын

No need to change the pump. It will act just like the original CP4 that came on the truck, yet be more durable.

@spencerlewis8209

Жыл бұрын

@@SSfueled what if I’m deleting the truck

I have a 2015 lml stock witch Can I install a cp3 without having to toon

@sborrego304

3 жыл бұрын

One more if I get the 50 state carb compliant and eventually a do some mods Can a still run this pump or would I have to replace

@David-od9gb

Жыл бұрын

I’m pretty sure there’s a drop in version for stock truck with no engine mods. Just do some more research

S&S diésel how are you.,i just bought a 2012 gmc 2500hd with the6.6L duramax.,how i know if has a cp4 or cp3.?

@alfrejaime

2 жыл бұрын

@@SSfueled you recommend converting to cp3

@David-od9gb

Жыл бұрын

@Alfredo Jaime look up S&S diésel they have a video showing how one would know which one you have.

I read a lot of comments regarding the relative lack of reliability of the CP4 pumps, but no one ever provides any hard data. What is the actual failure rate of the CP4?

@SSfueled

Жыл бұрын

Great question. The OEs do not publish that data, yet there has been enough to warrant a law suit. We think it is compounded by the amount of damage done when the pump does fail.

@jeremybroderick9465

Жыл бұрын

@@SSfueled So Bosh should be the one to go after for building a knowingly faulty product not Ford or GM

@tomroe7715

Жыл бұрын

Every single one. I work on them daily.

@davncingilbert6662

9 ай бұрын

The failure rate seems to be only around 4-7%, and has much to do with the fuel quality. Bosch (a European co.) designed these for use with European diesel, which has more sulfur (lubrication) than US "low sulfur" diesel. Apparently, GM didn't take this into account. So, people with access to quality diesel, who have lift pumps/filters, and use lubricity additives will not likely have an issue. Our truck had 122,000 mi before getting a Cp3, and had no issues other than a head gasket failure. (We didn't add a lift pump/additives until about 90,000 mi) Another consideration: We travel full-time in a camper, and get fuel from many different areas, vs one town.

@BladePro2021

7 ай бұрын

My 2015 lost the cp4 twice ,once at 70000km (45,000 miles) with warranty then again at 170000km (108000 miles) which cost me $12,000 Ca to clean the system and install a CP3 Kit and that was with changing filters regularly . The CP4 will fail its just a matter of when.

@SSfueled whats the pump 2nd to the left.

@SSfueled

3 ай бұрын

That is the No Tuning Required CP3. It has been modified to match the factory CP4 pump curve. It does not have an increase in output capability but the amperage to output curve has been modified to match the CP4 so that the ECU can properly control it.

@bmac9317

3 ай бұрын

@@SSfueled whats the part number for it, if you know it?

@SSfueled

3 ай бұрын

@@bmac9317 LML-CP3-NoTuningReq

@bmac9317

3 ай бұрын

@@SSfueled thanks souch!

Bosch needs to be sued big time for this design

@roadiesgarage3816

3 жыл бұрын

When gun manufacturers are being sued for negligent unlawful use of their products. This should be an easy case id think🤷‍♂️

@2hotscottpro

3 жыл бұрын

In 19 and 20 there was class action law suits but I don’t think anything come of them.One truck only had 44k when cp4 crapped out.It’s not a matter of if but when !

@mr.s9795

2 жыл бұрын

My 2012 GMC Duramax CP4 crapped out at 65K in 2018. Luckily my local GM dealer helped with cost, but it was still 3K. Now I am at 130K and looking to do the CP3 conversion, which will be close to 3K just for the 50 state kit. Love/Hate relationship with this damn diesel.

Cp3 will take out the fuel system as well. Ask me how i know…

I’ve had my LML for 12 years now, I always change the fuel filter at regular intervals and buy fuel from reputable service stations with lots of traffic, not from the back country stations with old rotted out tanks. This advice to go CP3 aftermarket seems a bit overkill unless you live on the edge and fill with contaminated fuel.

@davncingilbert6662

9 ай бұрын

That's been our experience as well. But since we rely on our truck for EVERYTHING, when we did a rebuild for a head gasket, we went ahead and did the Cp3 swap at the same time. It's simply a better designed pump, check out videos on it vs the CP4.

anytime you have cams and rollers there's always going to be a chance of life changing failure

Have you made a kit for the 2019+ 6.7 Powerstroke yet?

@Joseph96752

2 жыл бұрын

they do make emergency kits for the 19 6.7 but not sure if they make an actual cp3 for it yet