سلام عليكم عندي مشكل SC 670-02

@teamhoudtoufiq2078

Ай бұрын

راسلتك على الانستغرام

@tamerco1

Ай бұрын

وعليكم السلام ورحمة الله وبركاته العطل دا لو نفس الموديل Code: SC670-00 Description: Engine start up error • Case 1 • /ENGRDY signal was not asserted when the machine was turned on or returned from energy saver mode. • /IPURDY signal was not asserted when the machine was turned on or returned from energy saver mode. • EC response was not received within specified time from power on. • PC response was not received within specified time from power on. • SC response was not received within specified time from power on. • Writing to Rapi driver failed (the other party not found through PCI). • Case 2 • Unexpected down status was detected after /ENGRDY assertion. Causes: • Case 1 • Engine board does not start up. • Case 2 • Engine board reset unexpectedly. Remedy: Check the connection between the engine board and the controller board. • If it is always reproduced, replace the engine board. If the problem persists, consider replacing the controller board or other boards between them. • If reproducibility is low, multiple causes are to be considered, such as software, engine board, controller board, and PSU. بمعني اصح بورده الشرائح الي بتقرا شريحة الحبر فيها عيب او مش نضيفه اعيب كنترول وداا ابعد احتمال

@teamhoudtoufiq2078

Ай бұрын

@@tamerco1 ممكن واتساب اتراسل معك

@teamhoudtoufiq2078

Ай бұрын

@@tamerco1 ممكن رقم الواتساب

ممكن رقم الواتساب