An unboxing and initial thought on the Ryobi RVC1218P-P Wet/Dry Vacuum.
Жүктеу.....
Пікірлер: 73
@alecruzcruz9047 Жыл бұрын
*Love this little unit **MyBest.Tools** all the power I need for cleaning up the rv as I'm restoring it, it will suck up whatever will fit in the nozzle with large storage container. Beautiful.🤣🤣🤣😂😂😂😂*
@DarrensWorkshop
Жыл бұрын
Hi, No, it's to suck.
@kaycgrocks2 ай бұрын
The instructions for this were so vague, I writ and design manuals and was feeling frustrated, thank you for this ❤️
@mahiaringamuru14283 жыл бұрын
Thanks for this. Trying to decipher the Ryobi instructions were 🥴😅
@DarrensWorkshop
3 жыл бұрын
My pleasure. Have a great day.
@buddywriggles2 жыл бұрын
Fuck me, this shit saved my life! Sometimes, out of nowhere, my brain just cannot compute something really fucking simple. In this case, how to put the fucking dust bag in! I don't know why I'm like this, but nothing in the multiple documents provided OR their instructional videos thought to point out something so obvious! THANK YOU
@DarrensWorkshop
2 жыл бұрын
Hi Frankie, Don't be hard on yourself, I have had several other messages from people who have had problems with the picture based instructions that Ryobi provide. They could make them clearer.
@MrChum1987
2 жыл бұрын
I still need to figure out if it goes over the lip of the nozzle or just sits there
@khumohuma2 жыл бұрын
@Darren's workshop thank you so much for the video... their manual had my father and I a bit confused. Thank you so much .... really appreciate it
@DarrensWorkshop
2 жыл бұрын
My pleasure Khumo. I’m glad it was useful.
@sukifarrell5180 Жыл бұрын
Thanks so much for the upload! I couldn't figure out what the black foam was for, I realise now it's just for wet vacuum ingredients. Thank you!
@DarrensWorkshop
Жыл бұрын
Glad to help Suki.
@Yollie267 ай бұрын
thank you for this video i was unsure how it all went together 😊
@reubenlichter73023 жыл бұрын
Thank you for the informative video 🙂 very well done
@DarrensWorkshop
3 жыл бұрын
Thank you.
@abdullaalnamy84223 жыл бұрын
I love this thing more and more🌼 Suction is as good as any other small capacity shop vac. Not like a big 6.5HP whatever. But all of the smaller ones are about the same. I have a small corded ShopVac and this thing is about the same.
@DarrensWorkshop
3 жыл бұрын
Cheers Abdulla. Have a great day.
@buddywriggles2 жыл бұрын
Lmao so the inside vac carked it, bought this exact model this time. I never would have imagined how bloody useful an unboxing of a vaccuum would be.... TWICE!
@DarrensWorkshop
2 жыл бұрын
Cheers Frankie
@jeezyboy32 Жыл бұрын
Thanks, that was helpful
@DarrensWorkshop
Жыл бұрын
You’re welcome.
@ranzjerkans7746 Жыл бұрын
Thanks you much appreciated
@DarrensWorkshop
Жыл бұрын
Hi Ranz, you are welcome.
@user-vb1zy9ev9e2 жыл бұрын
Thank you for information video
@DarrensWorkshop
2 жыл бұрын
You’re welcome
@YKATO8713 жыл бұрын
Hi could this be used as a dust extractor for random orbit sanding only? Thanks.
@darren4392
3 жыл бұрын
Hi Raho, Yes it could.
@action-nerd2 жыл бұрын
I have a unit with a cloth pre-filter that goes over the cartridge. When would I use this? Presumably not necessary with the dust bag? Use it when there's no dust bag? Basically I want to vacuum up larger objects, bits of timber, and nails.
@DarrensWorkshop
2 жыл бұрын
Hi Alex, I don't recall receiving a cloth filter with mine, but it was a while ago now. I did receive a foam cover that fits over the cartridge when using the vacuum in its "Wet" mode. Perhaps your cloth filter is for the same purpose. Where ever possible, I recommend using the bag. That way you are better protecting yourself from fine dust particles, especially when emptying the vacuum canister.
@bread-gz3rl
2 жыл бұрын
@@DarrensWorkshop take the cartridge out when vacuuming wet
@Ramandeepkaur-yc3wn3 жыл бұрын
thnks man❤️❤️
@DarrensWorkshop
3 жыл бұрын
You are welcome Ramandeep.
@tonyj84653 жыл бұрын
Would this work for a table saw to suck away the saw dust while attached to the duct?
@DarrensWorkshop
3 жыл бұрын
Hi Tony, If you had said router or sander, then I would say yes, but table saws throw out dust in a few different directions, so some always escapes no matter which dust extractor you use. So yes it will remove the dust, but not 100% of it. Also you will probably want to put a cyclone or a dust separator between the vacuum and the table saw or you will fill the vacuum bags too quickly.
@PrincessZahraaa4 жыл бұрын
I can’t seem to attach the floor attachments to one another it is tricky. I looked at 6:50 in this video and you do not attach the second attachment. Can anyone help?
@DarrensWorkshop
4 жыл бұрын
Hi, I'm not sure exactly which bits you are having trouble with, but.. The two wands or poles are tapered, meaning that they are wider at one end. This allows two wands to be joined together, wide end to narrow. This will leave one narrow end exposed which goes into the cleaning attachment. You can only use one cleaning attachment at a time. they don't connect together. The other end of the wands connect to the vacuum hose.
@noname-yx9gm4 жыл бұрын
May seem like a stupid question but you dont leave the wet sleeve and cover on if you using it for dry stuff?
@DarrensWorkshop
4 жыл бұрын
Hi, that is correct.
@noname-yx9gm
4 жыл бұрын
@@DarrensWorkshop thank you, mine came with no instructions
@JuiceBanger1
4 жыл бұрын
@@noname-yx9gm mine neither. I got ex display, cheap.
@noname-yx9gm
4 жыл бұрын
I managed to find a pdf download for it somewhere
@violethill1174
4 жыл бұрын
@@DarrensWorkshop what happens if it is left on? Also thanks for your video, i have a slightly different model (ryobi) and couldn't figure out how to take apart the filter from the diagram they gave 😅
@rachelneale76144 ай бұрын
does it connect to the ryobi power tools ie the sander?
@DarrensWorkshop
4 ай бұрын
HI Rachel, I think so. I have used mine as dust extractors on other tools.
@annhoang678510 ай бұрын
I got everything right except the filter bit. The manual is hopeless. Thanks to this video. However, this foam is very easy to tear. I beat you many users have rip the foam when fit it on 😅😅😅
@DarrensWorkshop
10 ай бұрын
Glad it helped
@love2sing7774 жыл бұрын
Hi Darren question do you put the foam filter underneath the HEPA Filter please
@DarrensWorkshop
4 жыл бұрын
Hi Love2sing. No you leave the HEPA filter off for wet use. So the HEPA comes off and the foam goes on.
@love2sing777
4 жыл бұрын
@@DarrensWorkshop hi Darren thank you for that as I put the foam one underneath the HEPA so I'll take that out now lol
@lookingupwithwonder
4 жыл бұрын
What is the purpose of the hepa filter?
@jameswalker76253 жыл бұрын
Is there a bigger version?
@DarrensWorkshop
3 жыл бұрын
Hi, James. Ryobi do make a 30L model.
@celesteadams25832 жыл бұрын
Is this also for carpet?
@DarrensWorkshop
2 жыл бұрын
Hi Celeste, Yes it comes with a floor attachment. You could do carpet or hard floors.
@GypsyGirl232 жыл бұрын
I think I've just bought its big brother. I've just used it, opened it, bag is still on however there is heaps of pet hair in the drum not the bag. Not very good. And the poles are too flimsy for the length. Doesn't feel sturdy at all.
@DarrensWorkshop
2 жыл бұрын
Hi Nikki Lee, Can I please ask what model number of Ryobi vacuum that was? Do you still have it? Are you still having problems with it?
@user-eq3km3xe4x10 ай бұрын
ماهو البلد المنتج لها ريوبي
@DarrensWorkshop
10 ай бұрын
Hi, Taiwan and China.
@michaelmelnyk69304 жыл бұрын
How do I attach the hard floor attachment I can't seem to click it on
@DarrensWorkshop
4 жыл бұрын
Hi, at 6:50 minutes into the video I put the floor head onto the wand. This is a pressure fit, so don’t worry about listening for a click, it just slides onto the wand. The wand has a thin and a thick end so if you can get the head on, try the other end of the wand.
@lisabe1066
4 жыл бұрын
The hard wood floor attachments
@susane9452 жыл бұрын
You can't wash the Concertina filter!!!
@waltoncraghead74222 жыл бұрын
Thumbs up from me.?
@DarrensWorkshop
2 жыл бұрын
Cheers Walton.
@andrewh96296 ай бұрын
Thanks, slightly different model but the instructions are AWFUL. Not one mention of how to install the dust bag, not to mention how bad the seal will be, I'm going to add tape to hold it in place.
@alkamierskynet15573 жыл бұрын
Seems noisy
@DarrensWorkshop
3 жыл бұрын
It is probably slightly louder than the festool vacuums, but not by much.
Пікірлер: 73
*Love this little unit **MyBest.Tools** all the power I need for cleaning up the rv as I'm restoring it, it will suck up whatever will fit in the nozzle with large storage container. Beautiful.🤣🤣🤣😂😂😂😂*
@DarrensWorkshop
Жыл бұрын
Hi, No, it's to suck.
The instructions for this were so vague, I writ and design manuals and was feeling frustrated, thank you for this ❤️
Thanks for this. Trying to decipher the Ryobi instructions were 🥴😅
@DarrensWorkshop
3 жыл бұрын
My pleasure. Have a great day.
Fuck me, this shit saved my life! Sometimes, out of nowhere, my brain just cannot compute something really fucking simple. In this case, how to put the fucking dust bag in! I don't know why I'm like this, but nothing in the multiple documents provided OR their instructional videos thought to point out something so obvious! THANK YOU
@DarrensWorkshop
2 жыл бұрын
Hi Frankie, Don't be hard on yourself, I have had several other messages from people who have had problems with the picture based instructions that Ryobi provide. They could make them clearer.
@MrChum1987
2 жыл бұрын
I still need to figure out if it goes over the lip of the nozzle or just sits there
@Darren's workshop thank you so much for the video... their manual had my father and I a bit confused. Thank you so much .... really appreciate it
@DarrensWorkshop
2 жыл бұрын
My pleasure Khumo. I’m glad it was useful.
Thanks so much for the upload! I couldn't figure out what the black foam was for, I realise now it's just for wet vacuum ingredients. Thank you!
@DarrensWorkshop
Жыл бұрын
Glad to help Suki.
thank you for this video i was unsure how it all went together 😊
Thank you for the informative video 🙂 very well done
@DarrensWorkshop
3 жыл бұрын
Thank you.
I love this thing more and more🌼 Suction is as good as any other small capacity shop vac. Not like a big 6.5HP whatever. But all of the smaller ones are about the same. I have a small corded ShopVac and this thing is about the same.
@DarrensWorkshop
3 жыл бұрын
Cheers Abdulla. Have a great day.
Lmao so the inside vac carked it, bought this exact model this time. I never would have imagined how bloody useful an unboxing of a vaccuum would be.... TWICE!
@DarrensWorkshop
2 жыл бұрын
Cheers Frankie
Thanks, that was helpful
@DarrensWorkshop
Жыл бұрын
You’re welcome.
Thanks you much appreciated
@DarrensWorkshop
Жыл бұрын
Hi Ranz, you are welcome.
Thank you for information video
@DarrensWorkshop
2 жыл бұрын
You’re welcome
Hi could this be used as a dust extractor for random orbit sanding only? Thanks.
@darren4392
3 жыл бұрын
Hi Raho, Yes it could.
I have a unit with a cloth pre-filter that goes over the cartridge. When would I use this? Presumably not necessary with the dust bag? Use it when there's no dust bag? Basically I want to vacuum up larger objects, bits of timber, and nails.
@DarrensWorkshop
2 жыл бұрын
Hi Alex, I don't recall receiving a cloth filter with mine, but it was a while ago now. I did receive a foam cover that fits over the cartridge when using the vacuum in its "Wet" mode. Perhaps your cloth filter is for the same purpose. Where ever possible, I recommend using the bag. That way you are better protecting yourself from fine dust particles, especially when emptying the vacuum canister.
@bread-gz3rl
2 жыл бұрын
@@DarrensWorkshop take the cartridge out when vacuuming wet
thnks man❤️❤️
@DarrensWorkshop
3 жыл бұрын
You are welcome Ramandeep.
Would this work for a table saw to suck away the saw dust while attached to the duct?
@DarrensWorkshop
3 жыл бұрын
Hi Tony, If you had said router or sander, then I would say yes, but table saws throw out dust in a few different directions, so some always escapes no matter which dust extractor you use. So yes it will remove the dust, but not 100% of it. Also you will probably want to put a cyclone or a dust separator between the vacuum and the table saw or you will fill the vacuum bags too quickly.
I can’t seem to attach the floor attachments to one another it is tricky. I looked at 6:50 in this video and you do not attach the second attachment. Can anyone help?
@DarrensWorkshop
4 жыл бұрын
Hi, I'm not sure exactly which bits you are having trouble with, but.. The two wands or poles are tapered, meaning that they are wider at one end. This allows two wands to be joined together, wide end to narrow. This will leave one narrow end exposed which goes into the cleaning attachment. You can only use one cleaning attachment at a time. they don't connect together. The other end of the wands connect to the vacuum hose.
May seem like a stupid question but you dont leave the wet sleeve and cover on if you using it for dry stuff?
@DarrensWorkshop
4 жыл бұрын
Hi, that is correct.
@noname-yx9gm
4 жыл бұрын
@@DarrensWorkshop thank you, mine came with no instructions
@JuiceBanger1
4 жыл бұрын
@@noname-yx9gm mine neither. I got ex display, cheap.
@noname-yx9gm
4 жыл бұрын
I managed to find a pdf download for it somewhere
@violethill1174
4 жыл бұрын
@@DarrensWorkshop what happens if it is left on? Also thanks for your video, i have a slightly different model (ryobi) and couldn't figure out how to take apart the filter from the diagram they gave 😅
does it connect to the ryobi power tools ie the sander?
@DarrensWorkshop
4 ай бұрын
HI Rachel, I think so. I have used mine as dust extractors on other tools.
I got everything right except the filter bit. The manual is hopeless. Thanks to this video. However, this foam is very easy to tear. I beat you many users have rip the foam when fit it on 😅😅😅
@DarrensWorkshop
10 ай бұрын
Glad it helped
Hi Darren question do you put the foam filter underneath the HEPA Filter please
@DarrensWorkshop
4 жыл бұрын
Hi Love2sing. No you leave the HEPA filter off for wet use. So the HEPA comes off and the foam goes on.
@love2sing777
4 жыл бұрын
@@DarrensWorkshop hi Darren thank you for that as I put the foam one underneath the HEPA so I'll take that out now lol
@lookingupwithwonder
4 жыл бұрын
What is the purpose of the hepa filter?
Is there a bigger version?
@DarrensWorkshop
3 жыл бұрын
Hi, James. Ryobi do make a 30L model.
Is this also for carpet?
@DarrensWorkshop
2 жыл бұрын
Hi Celeste, Yes it comes with a floor attachment. You could do carpet or hard floors.
I think I've just bought its big brother. I've just used it, opened it, bag is still on however there is heaps of pet hair in the drum not the bag. Not very good. And the poles are too flimsy for the length. Doesn't feel sturdy at all.
@DarrensWorkshop
2 жыл бұрын
Hi Nikki Lee, Can I please ask what model number of Ryobi vacuum that was? Do you still have it? Are you still having problems with it?
ماهو البلد المنتج لها ريوبي
@DarrensWorkshop
10 ай бұрын
Hi, Taiwan and China.
How do I attach the hard floor attachment I can't seem to click it on
@DarrensWorkshop
4 жыл бұрын
Hi, at 6:50 minutes into the video I put the floor head onto the wand. This is a pressure fit, so don’t worry about listening for a click, it just slides onto the wand. The wand has a thin and a thick end so if you can get the head on, try the other end of the wand.
@lisabe1066
4 жыл бұрын
The hard wood floor attachments
You can't wash the Concertina filter!!!
Thumbs up from me.?
@DarrensWorkshop
2 жыл бұрын
Cheers Walton.
Thanks, slightly different model but the instructions are AWFUL. Not one mention of how to install the dust bag, not to mention how bad the seal will be, I'm going to add tape to hold it in place.
Seems noisy
@DarrensWorkshop
3 жыл бұрын
It is probably slightly louder than the festool vacuums, but not by much.