Whoa! Great Idea Thanks You make it look so easy to install This will help alot

This would be a great install for us...Last fall we went up to Maine (Old Orchard Beach) to camp and we ran out of hot water..I forgot that we ONLY had a 6 gal tank..With 4 adult females and one grandson..after one had taken a shower - we ran out of hot water (Wife was also washing dishes at the same time)..This would be perfect for our family.. Thanks for the video..Looks like it isn't a bad install to do.

Great video! I need to replace my hot water heater; going tankless thanks to you. If we ever cross paths, I’m buying you a beer, or two!

Wish you would have showed the wire installation for power but other then that video was great

Thank you for doing this. Our HW heater went out and I've been putting this off since fall. Summer trips are coming! GREAT HELP THANK YOU!

great video! the only thing this Fogatti unit already has a built in pressure relief valve and drain screw in the front it's the Red knob. :) 17:18 of your video.🙂

@TSquadRVing

2 ай бұрын

Thank you for watching. So the red knob is not a pressure release. It is simple a drain in case you want to drain what is left in the pipes of the water heater. Since it’s a tankless there is no tank to drain. Just the pipes. The directions do say to add a pressure release valve to the back. Please do not mistaken that the red knob is a pressure release valve. Thank you again for watching and I hope this was helpful.

@Papopiringa

Ай бұрын

Yeah, I don’t think you want water pouring inside your RV!

Stunning!! Wish you have a great camping life and you'll never run out of water from now on! Thanks for sharing!

@tylercrowell7639

Ай бұрын

Are all those extra parts necessary for the instashower 6? Specifically the pressure relief valve? I want to make sure I install this thing correctly, but this is a brand new project for me, and the instructions seem a little different than this video

I thought these came with a built in pressure relief valve…I just ordered mine 2 days ago and should be here today

Just did this and your video really helped.

Great video, my friend. Thanks for creating it!

@TSquadRVing

2 ай бұрын

Thanks for the visit

I wonder why they dont include the pressure relief valve in the Fogotti like they do with the tanked water heater.

Got my Fogatti heater. Now I'm looking for parts to do the pressure relief. I got the pressure valve and back pressure fitting off your link at Amazon. Now looking for brass nipple, 3/4" to 1/2" adapter and "T". The brass is freaking expensive. Why does it have to be brass? Will galvanized steel be ok?

@TSquadRVing

Күн бұрын

Brass doesn't corrode. But keeping an eye on it. I think your fine if your using galvanized. Thank you so much for watching. And clicking on our kinks. Safe RVing

I'm so confused about how the hot water is going to hook up. Is there an extra adapter or something I'm going to need?

@TSquadRVing

Ай бұрын

Thank you doe that question. Not sure what you’re asking? Watching the video through it’s entirely explains everything you need.

Good video. I would only do 1 thing different, for colder climates I would angle the relief valve up so the water would run down for winterizing the unit but I guess you can just pop the valve also.

@TSquadRVing

2 ай бұрын

Great idea. Thank you for that and thank you for watching.

Where did you run the controller wires to ?directly from the back of the heater to your location? I'm also assuming you must turn the heat switch on on the control panel?

@TSquadRVing

3 ай бұрын

Correct. Ran it from the Tankless Water heater through my wall to the inside bathroom sink cabinet. And yes must turn switch on at the panel. Thanks for watching.

Can you explain why there are so many 12 volt DC wires. I thought it only has 2 wires. Thank you.

@TSquadRVing

2 ай бұрын

I know right. There are a lot of 12v dc wire because of the two switches in the panel for when you want to switch on electrical and propane for your old water hwster. We use these wiresto Hook up to new tankless And another to hook up the control panel that I put under the cabinet. (blue wires) but are hooked up near water heater. I hope I explained that right and answered your question. This gives 12 volt power to start water heater and use switch Hope this helped a little.

Did you hook a hose to the pressure relief valve so if it goes off it doesn't do it into the coach?

This was awesome !! I have a fogatti coning timorrow and never wiuid of thought that all those extra items will not be included. I guess ill run out and get those today. . Question shoukd i bleed the gas before we start this whole thing?

@TSquadRVing

3 ай бұрын

Hey. Thank you for this comments and question. Make sure all LP is turned off at the source before disconnecting any LP . Once all hooked up. Turn your LP back on and turn your stove burners on. This will remove all air from the LP. Then you’re good. Hope this was helpful and have fun.

Im having a few issues with the wiring. I have blue, orange, white, and green. Any idea which is the correct wires to use?

@TSquadRVing

Ай бұрын

Do you still have your original water heater? There should be a label saying what those are. If you email me I will send you my label. Could be the same.

@ryannies3926

Ай бұрын

@@TSquadRVing what is your email?

@TSquadRVing

Ай бұрын

Tsquadrving@gmail.com

Thanks so much for the walk through install. Do you have an rv or trailer?

@TSquadRVing

3 ай бұрын

We have a 2020 Grand Design Reflection 312BHTS. Thanks for watching.

So the releases value releases inside the rv

@TSquadRVing

3 ай бұрын

Correct. I will end most likely install a pipe from that to an opening if I do decide to relief pressure. Thanks for watching.

I’m having trouble getting the wiring done. I have white - and black + but on my wires on the trailer are blue brown red and green. I did black to red and brown to white Green to black white to brown

@TSquadRVing

3 ай бұрын

Do you have an tester? If so test to see which one is the 12v. I know what you are going through. Every manufacture builds them and wires them differently.

@TSquadRVing

3 ай бұрын

Can you email me with a picture of what you have. I think mine was the same. tsquadrving@gmail.com

@TSquadRVing

3 ай бұрын

On your existing water heater you should have a diagram where it shows the 12v pattern. I just checked my old one. I can send you that pic.

@wesleypatrick3723

2 ай бұрын

@@TSquadRVingI just bought the same water heater you show in your video. I think have the same wiring as you do. I have a green, white, blue and orange wires. Could you explain how you wired those to the black and white wires in the heater? I would appreciate any help you can give!

Are these universal? As in can you put one of these in any camper?

@TSquadRVing

3 ай бұрын

Yes. It depends on the opening as well. Some need to modify the opening some don’t. But keep in mind the size of door. Thanks for watching.

@shadowwulph

3 ай бұрын

@@TSquadRVing thank you for your reply and now to order a new waterheater!!

I just bought this unit (InstaShower 6) but mine came with the pressure relief valve inside the unit.

At the end of the video you tested via a wTer hose. What was hose connected to? We want the ability to fill an external hillbilly hot tub in a cow tannk. Thanks great video

@TSquadRVing

3 ай бұрын

Good question! I have an outdoor connection for a hose. Here’s a video of where the hose is connected to. kzread.info/dash/bejne/Z62n149yaMngadI.htmlsi=yoaOKTig7QCbaynU

At the 24min mark at the front is a big red "knob" with some hose below it, is that a temp/pressure release valve? Then would the rear one you installed be redundant and should you think of routing the rear release valve to the front? If the valve opens I would hate to flood my trailer.

@TSquadRVing

4 ай бұрын

Thank you for this comment. I believe that is just a water release valve to empty tank when needed. Also. I have thought about routing the pressure release valve to a hole in the floor making sure it has a way to drain until I thought “I will never have to use the pressure release valve” because of that red valve in the front”. I don’t think you would flood your RV unless your water gets to a point where it engages the pressure release valve. You would notice if that ever happens then you turn the water off. But that is a great question. Thank you. Make sure you install a Pressure release valve per instructions.

Why is it designed with pop-off valve in the back?

@TSquadRVing

4 ай бұрын

I think you’re referring to the pressure valve? If so. If the temperature gets above a certain degree it’s made to engage the pressure valve so the pressure does not build up. My apologies if that’s not what you meant. Thanks for watching.

If it’s tankless, why would you need a pressure relief valve? Don’t you think the engineer that developed the system would added one if it’s required?

@TSquadRVing

3 ай бұрын

I hear ya. But that’s what the direction call for. I guess just like some hot water tanks you have to purchase separately. Thanks for watching. .

@coyotecreek318

28 күн бұрын

@@TSquadRVing you just said it, hot water tank, it’s has pressure which requires a relief valve, but its tankless, no pressure, I just installed one in my RV, no extra valve needed