I've never run across your page before. Thanks because this video helps confirm my LHR 19E decision

@DetailingMadeSimple

Жыл бұрын

Anytime. It’s a very good rotary as well can’t go wrong with either the flex corded or Rupes 🫡💪

Thank you for your videos. I just started watching them. This one helped me to make a decision.

@DetailingMadeSimple

7 ай бұрын

Anytime my brother 💪. I am glad you enjoyed the videos and helped you make your choice 🙏. Which are you going with? Also there is a rotary coming out from DIY Detail being released in March! That’s 3 months of you would like to wait until then with the ideal 600rpm and high rpm for drying out the pad

flex pe 14 corded is the best rotary polisher ever bro it is so much fun to use it's so balanced it's a dream to use

@DetailingMadeSimple

Жыл бұрын

I agree! I love the low rpm of the rupes and lighter weight. But the flex is much more balance and has better ergonomics

@reginaldpeterson6190

Жыл бұрын

@@DetailingMadeSimpleSoc, now that you’ve had some time with the corded rupes, would you recommend the corded rupes or the corded flex rotary?

@DetailingMadeSimple

Жыл бұрын

@@reginaldpeterson6190 pros and cons for both. Rupes does not dry out the pad well enough like the Flex corded. But I like the option of doing 450rpm on the rupes for softer paints. But overall I’ll go with Flex. The Rupes is not bad don’t get me wrong for my preference the Flex is much more suited for me.

@DetailingMadeSimple

Жыл бұрын

@@reginaldpeterson6190 of course like I said for very soft paints the rupes 450 is my go to. It’s like have 2 different channel locks a V jaw or Open mouth channel lock. You can use either 90% of the time just for which applications and may depend which is chosen 👍

@dillon599

4 ай бұрын

Would you buy the cordless flex rotary or the rupes rotary if I already have the flex corded rotary?

Thank you for the info! You should do a review on the flex corded. That's a huge leap of speed for just the first speed on each machine.

@DetailingMadeSimple

Жыл бұрын

Anytime my brother 👍💪. I should but I don’t have money to throw around like that. Eddie!!!!! Send me you corded flex so I can do a review I’ll send it back!!!! 😭😭😭

Dang, the maxshine rotary looks bomb and the price is right! 800rpm might be a bit too much for finishing 🤷🏻‍♂️

@DetailingMadeSimple

Жыл бұрын

Yeah!! The maxshine price is great. You can finish with 800 rpms! Just quicker movements. To me the maxshine is a balance of rupes and flex. If they can have the same speed “for me” 600 maybe 450 rpm like the rupes it will be like the greatest rotary of all time. It’s light too!

What’s the polisher that you mention that’s not out yet? Thanks for the great video bro.

@DetailingMadeSimple

Жыл бұрын

I don’t know the name yet! Once I get it I’ll tell you. But when I used it it was a sooo smooth!! I think it will be released either this month maybe next month.

So do you like that rupes rotary with that lower rpm better than any other rotary you have used before? Im gonna be getting a rotary soon never tried one, I picked up the rupes 5 in mark 3 15mm recently. I also grabbed the Griots 13mm g13 3in that can go down to 2in aswell.

@DetailingMadeSimple

9 ай бұрын

Hey John yes I do enjoy the rupes rotary. I've been on a rotary thing lately. The Flex I enjoy a lot as better the corded. Those 2 are my favorite the rupes and flex corded since it has low RPM. Did you end up getting on eventually?

I'm glad you liked the Rupes so far. You will see that several hours of polishing a day with less weight will make a difference in the fatigue of the arms. One question, what brand of backing plate did you use? It looks flexible.

@DetailingMadeSimple

Жыл бұрын

Yes for now I like the ergonomics and balance of the Flex when in use. But the rupes is lighter and less rpms! 🥲. As for the backing plate it’s the lake country 6inch rotary plate. They have them in yellow in some places but most sell them in black now. Which to me it’s better maches with all machines!

@mariah.garridor.6997

Жыл бұрын

@@DetailingMadeSimple Thank you!

@DetailingMadeSimple

Жыл бұрын

@@mariah.garridor.6997 Anytime and it’s very flexible and Soft. I love this backing plates

Rupes corded rotary is 4.85 lbs, corded Flex is 5.0 lbs. The Flex has a higher max speed to spin out the water from the pad. I think Flex PE 14-2 would win!

@DetailingMadeSimple

6 ай бұрын

Yes for sure I like the ergonomics better on the flex. The flex corded I like more than the types for the higher rpm to dry out the pad. 💪

Soc, love the channel. What grease do you use in your Rupes LHR19E? Thanks

@DetailingMadeSimple

Жыл бұрын

Hey Jim. I have not changed the grease yet in my rotary. I will be swapping it out with red and tacky grease from harbor freight. They say that works great. I used to use Mobil High temp grease on my machines which work great. I will give the red and tacky hi temp grease. Yvan uses that and used one of his polishers that had it. Pretty smooth

@DetailingMadeSimple

Жыл бұрын

Thank you 🙏. Glad you enjoy the content

@jiml9855

Жыл бұрын

@@DetailingMadeSimple Thanks, I just picked up mine and thought it would be good to make sure it has the best grease for a longer life. Any Idea when Yvan and Nick are releasing the red waffle polishing pad? Thanks for your response.

@DetailingMadeSimple

Жыл бұрын

@@jiml9855 it’s definitely a good thing to switch out the grease for sure! I’ve just been a tad bit lazy as I have to go out and buy the grease 🤣. As before I had it already so I’ll just end up doing it asap. As for the release date of the red waffle pad. I am not sure. No specific date. Yvan was kind to let me have one when I was at one of his rotary training class where he had a couple on him while we tested them out. Finished so good we asked for some 😭

Nice machine looks smooth it also came out nice and if anyone don’t like it and it’s bother with your slippers technique. Who care it’s your freaking channel. 😂🤣😂🤣

@DetailingMadeSimple

Жыл бұрын

🤣🤣. Bro I was in slippers. Throwing machine on the paint stepping on the panel. 😭🤣. The rupes has light weight and low rpm. The flex has a better ergonomics and balance than the rupes. They need to mix the rupes flex and maxshine one into one machine that’ll be the best rotary ever!

Rupes on speed 1 do you find it getting hot? DIY detail has a rotary out that supposed to run cool because of the gearing…regards, Tony

@DetailingMadeSimple

4 ай бұрын

Hey Tony. No it does not get hot on speed one. The thing that Rupes lacks is having the ability to dry out the pad as its highest speed is only 1900 rpm. Yes DIY has a rotary out which I purchased mines 2 weeks ago same with their DA and will be here tomorrow. I will play around with it as to be fair I always preferred the flex corded rotary as I like the 600rpm and the 2200 rpm to dry the pads when using a pad washer but it’s a $450 dollar machine. DIY rotary based on specs sounds and also is slightly better than the flex corded rotary at almost half the price. I suggest 2 options. Wait for my review on the rotary from diy or get the DIY as based on specs it’s better and or cheaper than the either Rupes Rotary and Flex. You can also use my discount code DMS at DIY for 10% off and you’re still saving money. Hope this helps you out 👍

@tony8354586

4 ай бұрын

Thanks, I wish the diy started at 450 instead of the 600+ then ramped up to what they claim…I will wait for your review. Sad thing, rupes I bet will be coming out with a battery rotary that will probably be sick…but looking for your review..

@tony8354586

4 ай бұрын

@@DetailingMadeSimpleI sent you a msg. Under my post please look at it, getting tired

@DetailingMadeSimple

4 ай бұрын

@@tony8354586 yes I am too hoping for a cordless rotary. To be honest I enjoy the 600 rpm the most which is speed 1. 450 is a bit too slow imo. On the market all they had at 600 was the flex corded rotary and it was $450. For competition they had the dewalt which was 800rpm speed 1, flex cordless 800rpm, maxshine 800rpm, shine mate 800rpm speed 1. Which I don’t like at all. Only one close but low quality build and heavy was the chemical guys rotary which is 600 rpm but I don’t like the bulkiness and weight and high pitch noise. So we will see. It’s all preference. If Rupes makes a cordless rotary they need to have a high RPM to dry out the pads that 1800 or 1900 don’t cut it.

Lets call the rupes the bounpes it seems to be jumpy but could be the angle of the camera

@DetailingMadeSimple

Жыл бұрын

😭. I like the flex ergonomically and balance better than the rupes. But the rupes has that nice slow rpm and light.

@orthodox1717

Жыл бұрын

@@DetailingMadeSimple I noticed that too, looks like the Flex is smoother.

@DetailingMadeSimple

Жыл бұрын

@@orthodox1717 yes the flex ergonomics and balance is better than the rupes by far! The rules makes up for weight and low rpm. Edddieeeee!! Send me your corded Flex I’ll make a review and I’ll send it back to you 🤣🤣🤣