much better explanation than actual anarchy’s official, thanks

I followed the Anarchy Outdoors video and misaligned my firing pin mechanism. Their video sucks and the camera is too far away to see what he is doing. The damage I did was so bad, I had to send my rifle to Ruger for repair. This video is awesome, thank you. You can see exactly what you are doing. Anarchy should take a lesson out of your playbook.

Excellent video I just pick up my ruger American Hunter in .308 with the magpul hunter stock. The bolt handle and knob came in last week from anarchy outdoors. My daughter's got me for Christmas the magpul bipod in m-lok. I bought myself a vortex diamondback tactical 6x24-50 scope. Now the only thing left to do is smuggle the rifle into the house without getting busted by my wife

@txpredatorhunting

3 жыл бұрын

😆

@figureVERSE

Жыл бұрын

In the meanwhile you can drop it off at my house I'll hold😅😅😅😅on to it

@wavular

Жыл бұрын

Good luck! Women have some sort of psychic warning system Built in....lol

Holy shit man...your video saved me, the removal tool slipped out and I thought I was done for I found a video showing how to get it back in, then I cam back here and watched this about 30 times....thank you sir!!!

Love it. I don’t think there’s any way I’m going through this without also going with an aluminum shroud at the same time. The tool looks like it makes a difference.

Thank you 👍 just got my anarchy outdoors bolt upgrade and dragon scale knob. Took like 5 minutes. Appreciate the help. To any other people who want to do this upgrade make sure and get the fire pin removal tool. Thanks, Casey

Wish Anarchy Outdoors would have done their instruction video half as good as you. They don’t even mention the ledge before they tell you to rotate and the view of the bolt and the amount of time they take to let you see what they are doing is like they are pulling a slight of hand Street corner magic trick on you. Job well done sir. Wish I would have watched you video 3 hours ago instead of trying to get ahead of Murphy law during my bolt handle swap for my American Ranch Rifle set up.

I just did mine and the shroud came off right after the first click, so I continued by using a flat land plyer to continue the rest of turns to align properly to remove the firing pin and the original handle. Continued the rest of the process and after all done squeezed the shroud in place. Thanks for the very up close and clear video to follow the steps.

M carbo make great gear with perfect instructions , I fitted the model 70Win spring kit to my model 670 it gave my rifle a new lease of life .well worth the shipping to Australia 👍

Just got finished installing anarchy outdoors swept back bolt handle and bolt knob and shroud (without the tool) and I thought surely I done effed up 🤦‍♂️😡🤬. I sure could have used a third hand or that nifty little tool that I WILL BE buying here in just a second!! Without your video I would not have been able to get it back together. THANK YOU!!!! 🙏

Thanks for the easy explanation without all the garbage rock guitar solos and over the top graphics.

@txpredatorhunting

3 жыл бұрын

Your welcome.

makes me want to change my bolt handle now... great vid, easy peasy

Excellent video for do it yourself lever replacement....Thanks!!!!!!!!!!!

Great job explaining it the easy way !

@txpredatorhunting

3 жыл бұрын

Thanks. We will be doing a new ruger American video soon. Showing another way of doing it. And replacing some more parts.

Awesome no nonsense video.

I've had a ruger american for 8 year and ive never seen a tool like that! Im going to have to pick one up just for deep cleans after hunting season.

@evanbuck6459

2 жыл бұрын

Whats the name of the tool

Thanks for the video , super helpful

Excellent video.

so helpful thank you so much

Who do you get the tool from? Who makes it?

There should be all kinds of punctuation around the "keep tension on the firing pin removal tool" part. The firing pin spring is strong and when the tool slips out and the spring closes. Well it's a day full of fun getting the tool back in place so you can reassemble the bolt. Other than that great video. Thanks.

@txpredatorhunting

3 жыл бұрын

I’ll make another video showing an easy way to deal with that soon. Thanks for the idea.

@regiperrault9840

2 жыл бұрын

Firing pin removal tool just slipped. Now I'm stuck, nervous and embarrassed lol.

Great vid!!!

@txpredatorhunting

3 жыл бұрын

Thanks, we will be doing another vid soon on the ruger American. Beside and check it out.

I have replaced the bolt handle and knobs on all my rifles from anarchy outdoors. Tonight i thought i could do it from memory. I just efft up and the tool came out. No idea what to do now. You said in the comments that you would make another video to fix this.but i could not find it.. i was removing not stock cuz I have to send the rifle back to Ruger in the morning and this has to happen.

Thanks

Why does your schroud turn clock wise so easily. I struggled to turn clock wise once on mine and it seems stuck, any advice?

Exactly the same with the Ruger precision gen 3.

Subscribed

Thank you

Hi, thanks for the great video. I'm having some trouble since the firing pin removal tool slipped out and I'm unable to get it back in firing pin mechanism. Can you help me out? 😅

@Johan_Pentrose

Жыл бұрын

Yeah, welcome to my world. That just happened to me. No idea how to reledy. That firing pin spring is very strong. Help!

Don't forget that there is a .487 and .497 slot. you dont have to measure it. the 497 has a round knob, the 487 has a pear shaped ball with a flat spot at the end of the ball. they changed that slot that the bolt slide through..check it out on internet..

Will this work the same way on the ranch rifle in 450 , or is the bolt different on the ruger American ranch .

@drnapalm7605

5 жыл бұрын

Call ruger

@txpredatorhunting

3 жыл бұрын

I would assume the same. But I’ve never looked at a 450.

I doubt you’ll see this but how do you fix the firing pin when the tool comes out when the firing pin is outta the sleeve

Question, what does the contour on the lever actually do?

Will replacing the handle help smooth the reloading action? New to bolt actions

@bansheerider619

Жыл бұрын

No. The handle has no functional purpose other than pulling the bolt back. If you want smoother action get a different bolt or look at how people smooth them out with polish etc..

The older version had the larger slot.

I'm going to try it tomorrow but don't have the tool.

Does this work for a left handed American or do they make one for the lefty?

@txpredatorhunting

3 жыл бұрын

I’m not sure if they make a lefty. If they do I’m sure it applies.

Great video....the removal tool I got was a total peice of shit....broke on the first try.........

Sir where did you get that tool at what store. Thank you in advanced.

@aMcConghie16

24 күн бұрын

Anarchyoutdoors sells them with the handle upgrade 10$ I think.

@victorcolon5454

24 күн бұрын

@@aMcConghie16 thank you I ended up getting one and it worked perfectly

where did you get get the bolt handle from?

@BKamin14

4 жыл бұрын

Jim_Y_Le anarchy outdoors?

@txpredatorhunting

3 жыл бұрын

Anarchy outdoors for bolt handle and firing Pin removal tool.

So does this mean he has turned a bolt action into a carbine mechanisms action rifle

Hey bud where did you buy that tool?

@Boot2Ass24

3 жыл бұрын

??

@Boot2Ass24

3 жыл бұрын

I can’t find it online, I want to change my stock bolt knob but it’s not the threaded type, it’s solid, so I need that same little tool to replace the whole handle, any info I would appreciate it, thanks!

@allymunitions3734

3 жыл бұрын

@@Boot2Ass24 Here you go bud. www.anarchyoutdoors.com/firing-pin-removal-tool-for-ruger-precision-american/

"Aholt".. of it?

please note......when trying to install the anarachy outdoor firing pin, AD arms piece, glades handle and glade shroud.........this isn't easy.

Where did you get that tool?

@txpredatorhunting

5 жыл бұрын

Jason Troutman from Anarchy Outdoors.

@jasontroutman7313

5 жыл бұрын

Texas Predator Hunting W.D.C Awesome. Thanks.

You don't have to rotate the bolt shroud that far.

Name the tools please

@txpredatorhunting

3 жыл бұрын

Anarchy outdoors firing pin removal tool. We are fixing to do another vid working on a ruger american . We will be more elaborate with toos etc.

I don't get it. Why would you remove a properly shaped bolt knob for a poorly shaped one that can't be palmed without digging into your skin. You work the bolt handle with the palm. You don't grab it with the fingers.

@allymunitions3734

3 жыл бұрын

Ok boomer.

@porkchopspapi5757

3 жыл бұрын

@@allymunitions3734 your best shot...

@porkchopspapi5757

2 жыл бұрын

@@allymunitions3734 ok dummy

@omegaman6770

2 жыл бұрын

The bolt handle on my recently purchased Ruger American Predator is lame and appears smaller than older model Predators so I’m definitely swapping it out with an Anarchy !!

Sure is alot of extra work to something that is much easier. Way to many steps in replacing the bolt handle. I mean why are you turning it do much. And also take the tool and push up it will lock in the upright position and stay. I mean damn buddy who taught you to break this down.

@HuhWhatHuhwhatHuh

3 жыл бұрын

Yes. You’re video was much easier. Jackass

@txpredatorhunting

3 жыл бұрын

Cole , I’m aware there’s couple ways of doing said operation. I messed with it until I could come up with a easy to follow route. I’ve done littered hundred of these for customers. And had to figure it out on my own due to the other terrible videos on you tube. Feel free to drop a link to the one you created .

Do you buy the tool? I didn’t get it with my bolt gun

My bolt turned about a quarter turn, clicked (fired), and now it wont fucking budge...