We all know we need to get better at hitting the stop timer button

@Goldwingerkim

4 жыл бұрын

did you try bt. timer recently, or does it still suck for pro's.My gan-i, cant always keep up, but still recognize my solve. This timer is more accurate than stackmate/cubetimer, since you just start turning the cube to start and stop timing when done.

Let’s goooo who else has been waiting for this video for a while😂 some of you(like me)probably aren’t even close to being sub 10 but still have been waiting for this😂

@zyco7846

6 жыл бұрын

me too lol i am going to enter my frist competiton

@firstnamelastname3089

5 жыл бұрын

I'm still averaging at 35 seconds though.

@twistiicuber1055

5 жыл бұрын

Yee

@adityawaje2979

5 жыл бұрын

Thanks for this, man! I managed to solve a 3x3 in 7 seconds!!!

@kearomalley5895

5 жыл бұрын

yea lol im like sub 25

Next: how to be sub wr!

@sykboyt4737

6 жыл бұрын

daniel park Hmmm... I need the how to be sub UWR more 😕 I'm Already sub WR

@Tokyo_Pessi

6 жыл бұрын

Next, sub 1

@arjunswayamkumar2507

5 жыл бұрын

Sykbo YT are you still?

@tishaflorence1009

4 жыл бұрын

@@sykboyt4737 like your average or what

@HarshSharma-xu6oz

3 жыл бұрын

kzread.info/dash/bejne/apV2u7yOdsjcmps.html thank me later

1. Plan further in inspection 2. Regripless Cross Fingertrick 3. Advanced F2L algs 4. Use deduction in look ahead 5. Timing just f2l (6.5s) 6. Cleaning up LL mistakes 7. Controlling turn speed 8. Stay motivated

@HHMINGO5

10 ай бұрын

thanks

@ThatsEntertaining17

8 ай бұрын

🟠

@ajaj-yq6re

7 ай бұрын

my last layer is holding me back a lot. My LL alone is often 5-6 secs even if I know what oll and pll it's going to be. Since that's the case, I need my cross and f2l to be faster than 3.5 secs... I've spammed last layer well over a thousand times using the finger tricks jperm uses and still can't get the tps and often lock up if I go 'too' fast. The only time I get sub 12 is when my last layer is within 3.5 secs but I need a sune or one of the square olls and one of the u perms or t perm

@ignDart

4 ай бұрын

⁠@@ajaj-yq6rewhat cube do you use? also maybe it's better for you to slow down your turning a bit so you don't lock up, if it isn't your cube

I loooove your vids. You haven't uploaded as much, but man alive, it is worth the wait!!

I finally got a sub-10 today! (9.84) it was full step too lol

@tobscoober

5 жыл бұрын

Nice man 👍

@pllskip961

4 жыл бұрын

ayyy nice

@nglawrence5057

4 жыл бұрын

Congrats! I got my first sub-10 (9.51) a month ago and now I’m getting around two to three sub-10s every 50 solves

@aarzuuu

4 жыл бұрын

omg. I have a question. Can i do like at least -40 with two look pll and oll and beginner cfop ;-;

@pllskip961

4 жыл бұрын

Why Bother yes

I'm so glad this channel existed

Anytime someone asks me how to be sub-10 from now on I’m just going to recommend them this video. Amazing job as always J Perm!

J-perm you are now my most favorite cuber. No one can teach better than you, and I really love all your conent. I hope you keep making fun videos in the future :D

Thank you so much Jperm for all your amazing content. Thanks to you I just got my first sub 10 today (haven’t really watched this video properly) after just 5 months of getting into cubing even though I started with a virtual one a few months before to learn how to solve a cube

@remyscube4865

2 жыл бұрын

I got my first sub 10 today with last layer skip lol!

@freakyregeneration4084

2 жыл бұрын

@@remyscube4865 Good job!

13 min overview. That's what the world needs. Very complete video

Everybody: why am I watching this I should be watching sub 12 Me: why am i watching this I should be at sub 1 min.

@lilia3944

4 жыл бұрын

I'm just watching random cubing vids while practicing my algs...

@SagarCubes

4 жыл бұрын

Why am I watching this I should be at sub 20

@eriannecabrera5050

4 жыл бұрын

Me: Why am I watching this I should be at sub 25

@yuxinlittlemagic

4 жыл бұрын

Why am i watching this i should be on the tutorial (I'm a cuber this was meant to be a joke)

@Nono-ie4ew

3 жыл бұрын

@@Ceyxzl yes I've learnt it, I'm practicing it for a like a week now. Can you tell me how long it will take to get good at cfop bcos I'm struggling a lot in f2l.

Yehey! Thanks JPERM! I was waiting for this!

I feel relaxed as long as I know J perm is uploading

I want to see you get a WR in 3x3. That would be so cool; you deserve it!

@PopFizzCJ

6 жыл бұрын

JCB ShortFilms I wanna be sub 1:00

@aryansatpathy2404

6 жыл бұрын

PopFizzCJ start using cfop

@PopFizzCJ

6 жыл бұрын

Aryan SATPATHY I keep trying, but it does not make any sense

@aryansatpathy2404

6 жыл бұрын

PopFizzCJ Improve look ahead, learn full 2 look oll and full pll if possible. Put emphasis on fingertricks.make cross effeciently every solve u do even if it takes unlimited inspection time. Know all effective ways to solve any f2l case

@kool2770

6 жыл бұрын

He does not deserve it.

Your pll and oll algs are so smoothly executed it’s insane 🤯

Really nice and helpful tutorial as always Dylan

@vishantsatpalsolanki3600

6 жыл бұрын

Unknown Cubing yup

@vishantsatpalsolanki3600

6 жыл бұрын

Unknown Cubing Dylan Wang

Your this kind of tutorials will end up making me sub 10

@testtester8492

3 жыл бұрын

Englush

Thank you for the videos, I've training myself to do my best

Probably my favorite video on KZread

You uploaded this on my birthday !! Your video is absolutely awesome !!

your videos are just amazing and helpful ..

This video helped me a lot to improve.....my average is around 14 sec but whenever i see ur video and start cubing it will come to around 12 or 13 seconds..thats great .....

i love watching this and applying some of the tips to getting sub 20

@jperm as I said, you should do “7 tips to be the best cubing channel”. I love your work and btw I’m learning a lot from your f2l pdf!

Yay 😀!!!! You finally made it!!

Thanks a lot J Perm , I am able to get sub 12 average s all the time thanks to your sub 12 video. I average in the 11.5 seconds now and I am trying to get sub 10. I am watching your videos and UberCuber 's sub 10 video.

that percentage thing really motivated me!!

Thank you for this tutorial :D this helped me a lot

You gave us 8 tips thanks for the extra tip!

Thank you so much J perm I watch ur vdo for quite long I learnt ur tips and tricks I finally beat sub 10 , it took me around 11 months thank you so much

Why am I watching this.I should be watching the sub-12 one.

@kwii22789

6 жыл бұрын

Why am I watching this. I don't even own a rubix cube

@neoduh

6 жыл бұрын

qdp612 go buy one

@thijsbeentjes4008

6 жыл бұрын

qdp612 Rubik's*

@WrenCubes

6 жыл бұрын

Same

@lanzlegaspi7804

5 жыл бұрын

This is better, you can apply all tips here to become sub-12 and you can improve more on that so that you become sub 10 faster because you already know these tips really well

The BEST VIDEO , I now average 10 seconds thank to your videos , I'm going to do everything from this video to become sub 10. THANK YOU SO MUCH!!!!

@VKCUBED

4 жыл бұрын

And now you are sub 9

@keplercuber9155

4 жыл бұрын

Yup, actually sub 8.5 consistently.

@VKCUBED

4 жыл бұрын

@@keplercuber9155 wow I am stuck at 9.9-10.2 any tips ?

@keplercuber9155

4 жыл бұрын

@VK CUBED I would say become Dual CN , then learn better OLL , PLL and F2L algs. Learn respected finger tricks and sporadically drill them.

@keplercuber9155

4 жыл бұрын

@VK CUBED also how did you know I was sub 9 ? I didn’t tell anyone

This is so helpful! I average mid 10s now and I am hoping to get sub 10 soon!

@amarachiokonkwo3859

2 жыл бұрын

How fast are you now?

@rwu0812

2 жыл бұрын

@@amarachiokonkwo3859 sub 7

@amarachiokonkwo3859

2 жыл бұрын

@@rwu0812 That's cool.

@songokukun7248

2 жыл бұрын

@@rwu0812 holy shit!

@toxic2971

2 жыл бұрын

@@rwu0812 damn

This was the most helpful cubing video for me

Whoa Whoa.. Finally it's out. I average high 13 to low 14. Think this one should help me. Thanks a ton!!!

@JPerm

6 жыл бұрын

:)

Really nice video...again. Thanks !

I also have my own 2 cents. Stay receptive to your hardware. You never know, how your puzzle is setup could always be improved.

@testtester8492

3 жыл бұрын

Sounds like an excuse

I am very thankful you make this video

This is helping me already

that last solve was PRO!

Thank you for making this video J Perm

I love j perm and I got my first 10.91 and I couldn’t of done it without your videos thank you😃😃😃😃😃

Great video as always!

@JPerm

6 жыл бұрын

+Stan Smith thanks!

Your videos are really great... Could​ you make another Advance video on look ahead plzzzzzz

I love your tutorials

I'm the guy in the background at 11:15

@justinbiebermalaysia1335

5 жыл бұрын

Congrats

@msgbbx1860

4 жыл бұрын

Excaliber Cuber David no one cares tbh

@hassanbukhari5096

4 жыл бұрын

Excaliber Cuber David 😂😂😂

@sunziii_

4 жыл бұрын

@@msgbbx1860 I care.

@asdf14051

4 жыл бұрын

Excaliber Cuber David congrats 250k people have now seen you

while watching this video, i ended up getting my pb average of 7.87 seconds and 3 sub 7 solves which is just insane to me. thank you for the tips!

It's finally come out.

After about 2 and a half years of cubing, I got my first sub 10 today!

Help Me a Lot, Thanks

Amazing video dude

You always help us

10:45 have you tried first F with lefty thumb? I do that and it flows really well!

I'm just sub-20 of average, trying to get sub-15, but this motivated me a lot.

Me: "Why can't I stop averaging 12 seconds??" Also me: "Finally, only 30 more OLL algorithms to learn"

yay you finally made it :D

Nice video very helpful thank for you video || I will try it later

Helpful ty

Thanks for the tips I really needed this I've improved a little but it's not noticeable yet but thanks though

Close to 200k subscribers !

this is exactly what i need

youre so good man

2:25 literally whenever I try I and show people I mess up

I was not into 5x5 and I haven't actually watched your 5x5 series. But I really want to start with it. I know how to solve it, like centres, edges and all. I want some advanced algorithms. So please make a video having all required algs for 5x5, ranging from centres to edges to parity. It would be really grateful from your side

i only get motivated by seeing your videos

When you're planning your cross, do you actually think about the names of the moves? (eg: F U" F R) Or do you do it intuitively (eg: move that one here, insert red, etc)

@JPerm

6 жыл бұрын

+Jorza4daWorld intuitively. I imagine where the pieces will move and what they will affect

hey how do you usually set up new cubes? i just got a new Valk power M, it's very sandy and hard to turn

Thanks man!

@JPerm

6 жыл бұрын

np!

Hey jperm I have a question, what lube do u use? I'm a new cuber and haven't gotten any lube yet, what would you recommend?

That's very impressive

Why am I watching this I should be on the sub 30 one

@Hilpo-nh8tx

3 жыл бұрын

Why are you on this video when you are dead?

@riptidedev3945

3 жыл бұрын

@@Hilpo-nh8tx ??

@Hilpo-nh8tx

3 жыл бұрын

Albus Percival Wulfric Brian Dumbledore did dumbledore not die?

@riptidedev3945

3 жыл бұрын

@@Hilpo-nh8tx Did you forget I was the mastermind behind everything that happened to the life of Harry Potter? Bold of you to assume that I did not find a counter curse to Avada Kadabra

@Hilpo-nh8tx

3 жыл бұрын

Albus Percival Wulfric Brian Dumbledore IF YOU DIDN’T DIE HIA DID THE MASTERY IF THE ELDER WAND TRANSFER TO SNAPE

I've been cubing for 1 year and a half now I just got my official 13.27 average my times are 11.85,(15.42),15.26,(10.72),12.70 I really want to get sub 10. I notice my flaws especially with cross to f2l transition. I have a huge pause from cross to f2l that takes up to 3 seconds. I'm wondering if doing an x-cross or planning first pair during inspection is required for sub 10. My cross is executed in less then 1.5 seconds f2l done under 6 seconds oll 1.2 seconds and pll 1.3 seconds. Do you guys have any tips on how I can improve and maybe even get to sub 10?:D

Good video bro

@JPerm

6 жыл бұрын

thanks!

i learn from you cfop full method. 1 request make a video for pyramix

As of me you are best cubing youtuber

very helpful,finally i got sub 10!!!

Learn full oll🤓😝😗

@beefy1237

9 күн бұрын

It does help but I've noticed that even with 2 look OLL I'm pretty fast. For me it's my F2L that significantly lowers my time. I've started to realise just how important look ahead is. Now I've started trying to look ahead my times are slowly increasing, even if only a tiny bit.

How to be sub-10: 1. Learn CFOP 2. Learn fingertricks 3. Turn as fast as Feliks turn

which f2l algorithm do you prefer, 8 moves with 1 cube rotation or 11 moves but no rotation?

You are the best

color neutral solve is slighty easier to find first pair

Hey j perm it's been 2 years since I started cubing, practicing and practicing and I am close to sub 10 but others easily got sub 10 in 2 years but iam not sub 10 sometimes I am like 10 sometimes 11 do you have something to tell me to improve?

Dylan I need help, I avg 11 secs consistently but only 1 in every 40 solves is a sub-10, I can finish F2L in 6 secs avg, cross 1.5 secs avg, oll + pll + auf = 3 secs, where should I improve ?, Just asking :)

mmm very helpful! thx

your are really good

Out of curiosity how do you like that cube I just bought one and was wondering if you liked it

So helpful, thanks!

@astrophotographysometimes2303

6 жыл бұрын

Im already sub 10 so when will sub 7 come out thanks

@JPerm

6 жыл бұрын

+AstraroreLoL when I'm sub-7

do a review on the yuxin little magic m or an unboxing pls

Thank u so much Dylan Wang !!!! 😚😚😁😁

love-it!

J perm after a year: Hi friends today we are going to see how to be sub-3.

Hey how did you know the probability of plls? Is there a reference for that?

I'm just starting what cube do you recommend for beginners?

This is every cuber's dream

When I start learning 1 look pll, I think it might be a good idea to start with the N and G perms, do them a million times then work on the rest lol

Looking at this video after getting my first sub-10 solve a mahout and a half ago. And earlier today got a new best 3x3 average....and 4x4 average. Is that too much?

while i was watching this video I was doing solves. on one of them i got a 14.07 but the funny thing is I finished f2l when the timer was at 6 seconds lol.

@allana2019

4 жыл бұрын

recubeulous Thats a really inefficient Last Layer then. Work on that

@recubeulous

4 жыл бұрын

It was sad. I paused like crazy even though i knew 2look oll and full pll

@testtester8492

3 жыл бұрын

Oof

Nice video im also sub-10 but I learn in this video very much...

Great video! Can you tell me please which lube do you use?

@JPerm

6 жыл бұрын

+matko101000 thanks! martian lube from speedcubeshop!