When your cross takes more time than the world record...

@soulwolfx2291

5 жыл бұрын

Same. My cross and f2l takes about 1 m and the rest about 10 seconds to 30 secondz

@stratis5360

4 жыл бұрын

SoulWolfX 🅱️ruh same

@ijhhcfionlkgs

4 жыл бұрын

Exaclty

@josephstow

4 жыл бұрын

SoulWolfX yep

@TheMontha

4 жыл бұрын

I've been practising al0t and my CF takes sub 30🤨🤨

Basically every other cuber: Aw I only got 22 seconds Me: YEAAAAAAAAAA I GOT 43 SECONDSSS

@-daigher-2549

5 жыл бұрын

Same XD

@kostaskoukos3932

5 жыл бұрын

Me but 33 secs

@armaanverma5533

5 жыл бұрын

Same xD

@alextojong5094

5 жыл бұрын

Same my newest pb ia 42seconds

@shash._.

5 жыл бұрын

Same, but a minute...

I've been averaging around 30 for a while now, and I feel like the biggest hindrance for me right now is my f2l recognition time

@lizkim3229

3 жыл бұрын

SAME!!

@SnootDog

2 жыл бұрын

@@lizkim3229 ME TOO!

@t-perm9627

2 жыл бұрын

Same!

@ShawnStruckmeier

2 жыл бұрын

Same

@lilia3944

2 жыл бұрын

Sounds stupid, but next to just practicing it helps a lot to make sure you practice with good lighting. It doesn’t help fast recognition if you aren’t sure about the colors of the pieces

Wow... Liked the way this video was straight on point. Simple and effective. Rare to find such videos which are to the point from second 1.

"Don't think - just solve" ~Max Park

@mikuslembergs

5 жыл бұрын

At this level you shouldn't do that, focus on efficiency. When you'll be at Max Park's level, then you could do that :P

@jakobcs6856

5 жыл бұрын

Mikus Lembergs yes you are right! Of course you should focus on efficiency if you are slower and less expierienced. But I think at ~30 sec you should start thinking not to much during a speedsolve. In a speedsolve you have to focus on what you can do and not on what you still have to practice! Doing just some (not timed) solves on my way to school, where i could do some experimentantion, made me fast. In order to start learning lookahead (I'd say at ~20 sec) you have to know all your f2l cases and you have to be able to execute them without thinking. So you should start at around 30 sec. My average is ~12 sec and I'm still leraning new things fir f2l and LL. I do many untimed solves to get used to the new stuff, and after a while you start using new algs etc. During a speedsolve just on your own without thinking about that. During a speedsolve I dont think. Even thou max is 2 times faster.

@TheUltraX555

5 жыл бұрын

this is actually really good quote damn

@funboyz7928

5 жыл бұрын

Dont Solve - just think - NonCuber

@Carina02

5 жыл бұрын

i never think i just see how to solve the cross and i just turn my cubes like crazy. My pb is : 16,98

Move without your brain Me: *ULTRA INSTINCT MODE ACTIVATE!*

@hilalaakther9759

5 жыл бұрын

😂😂

@rmanda2003

5 жыл бұрын

🤣🤣

@HarshSharma-xu6oz

5 жыл бұрын

It means that Felix has mastered ultra instinct 😁😆

@kristijantodorovski5790

4 жыл бұрын

@@HarshSharma-xu6oz instinct*

@lachlanpower8354

4 жыл бұрын

Jhon Lawrence Bulosan 😂😃🙃🙃😆🤣😂😂🎽☺️😃😃😂😆

J Perm: Solving without your brain Me: *Instructions unclear, ended up having brain removal surgery*

@Ammu12373

3 жыл бұрын

Underrated.

@Ammu12373

3 жыл бұрын

Lol

@Ammu12373

3 жыл бұрын

Lmfao

@-halogenic-7263

3 жыл бұрын

Lol

@-halogenic-7263

3 жыл бұрын

Lol I love that joke

Most helpful tutorial!! Love your vids!

My big problem is f2l

@ahmedalshafi

5 жыл бұрын

@@luyu6104 How? like im trying to combine layer by layer with f2l but still not working out

@hamadachetouane9297

5 жыл бұрын

@@ahmedalshafi its easy to execute solutions but its hard to look ahead without pauses

@winter9306

5 жыл бұрын

@@hamadachetouane9297 I agree

@pranavakp9960

5 жыл бұрын

Yea I agree

@bindhusagar163

4 жыл бұрын

practise it ... it will take at least 2 week bro

“Now it’s tempting to learn a bunch of things at once” Proceeds to learn CFOP in one go

@Rudi_izzo

2 жыл бұрын

YEA

@advikdubey8473

2 жыл бұрын

J perm: learn 1 or 2 things at once Cubehead: learn all 51 oll algorithms

@TheBluePhoenix008

2 жыл бұрын

Hey I did that too. No one told me I shouldn't XD

@gdstuff7666

2 жыл бұрын

55！

@elichapin3366

2 жыл бұрын

me: proceeds to learn almost all pll algs in one go

I watched this when my average was about 1 min and I was like: wow, I’ll never be sub-30! Now I am, thanks jperm :)

@nilaydupare6983

2 жыл бұрын

How much time did it take???

@leduck8096

2 жыл бұрын

Same :)

@leduck8096

2 жыл бұрын

@Memes shorts It took me about 10 months and I say I cubed for about 15 minutes a day

@leduck8096

2 жыл бұрын

@Memes shorts i used a bit of intuitive f2l and some easy advanced f2l algs, and I knew about 28 of the 57 oll algorithms and 13 of the 21 pll algorithms

@leduck8096

2 жыл бұрын

@Memes shorts i am sub 28 and still don't know full oll and pll, neither do I know how to solve every f2l case in 11 moves or less, and less that two rotations

the past few months i’ve been practicing a lot, learning better cross strategies, better F2L, i’ve learnt full 1-look PLL, and i’m currently learning 2-look OLL. after hundreds of solves, i’ve cut my average from around 45, to around 25, and i’m really proud of that!! i hope to learn 2-look then 1-look OLL, keep improving my look ahead and F2L strategies, and maybe practice color neutrality too cause why not.

Almost every KZread video I'm watching starts with at least a full minute of annoying Intro stuff. You started this one right away and I Love it! I wish every Video was like that. :-)

@twistiicuber1055

4 жыл бұрын

8848manu that’s why many people love j Perm he’s very to the point and concise

@TechSupportDave

3 жыл бұрын

@@twistiicuber1055 and he teaches very well.

@uraveragebear1428

3 жыл бұрын

Twistii Cuber ur one of my favorite cubers

@liandremarcoricafort6606

3 жыл бұрын

Thats jperm for you

you actually slowing down and acting like you are trying to recognize the cases sre so funny to watch

@JPerm

5 жыл бұрын

you caught me

@williamhu9567

5 жыл бұрын

hehe

@khuwvdbhvpvmhpu5u4pi87

5 жыл бұрын

are*

@phamlam9254

5 жыл бұрын

True

@keifermatthew

5 жыл бұрын

J Perm could you do a slow turning average of 5? Its fun to watch

This is an EXCELLENT video! I teach 5th grade and now my students are getting into cubing! 😊👍🏼🧡

@bluetechsaw4841

Жыл бұрын

I AM in 5th grade and I got my Gan 12 Maglev banned for a month. (-_-)

Never have i thought I would rewatch this video after 3 years of not playing 3x3 cube. Those clicked subscribe button were never wasted on this channel even till now

Current:40 average By New Years:30 By Easter:20-25 By summer:15

@unknownuser-hc4uk

4 жыл бұрын

Soo, where progress?

@lapidations

4 жыл бұрын

Original commenter never delivers

@umghighlights9612

4 жыл бұрын

What happened?

@billyjoe8431

4 жыл бұрын

Any update?

@xc8959

4 жыл бұрын

he probably abandoned his channel rip

JPERM thank you very much for making this video. This video is what I needed to stay motivated. My PB is 21.56 but my ao100/ao1000 have been stuck in the lower 30's for over a year. It is very frustrating. I appreciate all of your cubing insight and knowledge. Have a great day.

@JPerm

5 жыл бұрын

good luck in improving!

@fluffypocketbtw4298

2 жыл бұрын

ayo you got an (ao/1000)?!?!?!?!?!?!?!??!

@_Aesop

2 жыл бұрын

@@fluffypocketbtw4298 when you think abt it he prob just does like 50 min sessions every day for 10 days?

@cychan.tkd.krt_

2 жыл бұрын

@@fluffypocketbtw4298 I started cubing 10 weeks ago and I get 7K solves LOL

@s.ramasamypillai6519

2 жыл бұрын

@@JPerm can i get sub 10 with beginner cfop

love the dope cubing vids Jperm, this helped me out a lot!!!!

Thanks j perm for your tips. I started cubing 4 months ago and just because of your tips I'm already sub 30 or sub 25 to be precise.

I’m fairly new to cubing. Maybe 4-6 months from my first solve to getting a better Cube and learning faster styles. This was one of the better videos I’ve seen and I will be utilizing this as I get more comfortable with 3x3.

@progamersaatvik2794

Жыл бұрын

Same 5-6 months from my first solve and I sub 50 seconds and my fastest is 32 seconds j perm really helped me to improve in this time

I spend more time on the cross than PLL and OLL

@thegoldendorito3085

3 жыл бұрын

How

@JohnSmith-kj2od

3 жыл бұрын

Same lol😂

@hellshaked6530

3 жыл бұрын

@@JohnSmith-kj2od watch his cross tips video and try to plan some of it in inspection time

@golfingnerd1204

3 жыл бұрын

I like your pfp

@Florian-uh3ft

3 жыл бұрын

hahahahah same lol

I was at university in the early 80s and bought a cube when they first came out. At the time, there was a printed list of algorithms available which I just learned - probably around 12 in total. After about 2 months, I could just do the first layer without any particular algorithms and then 2nd layer edges, yellow cross, position yellow edges, position corners and rotate corners one at a time. I could solve the cube like this in under 1 minute more than 50% of the time. If I got lucky, it could be 40-50s. A tricky solve would be up to 1:30. This was with a standard cube, no lube. More algorithms make it quicker, but I can't learn that many now - in fact I use fewer, just repeating them (eg. for the yellow cross). I can still mange sub 1 minute, having added some additional techniques from these videos. How speed cubers manage sub 4s is just iinsane.

My average was about 38 seconds, but now its 33 seconds! Last week I started trying to do an easier version of look ahead where I only look for one piece. The slightly slower movement but less pauses instantly knocked 5 second off of my time!

This is my go to video at the moment; 1. Watch video. 2. Practice for two weeks. 3. Watch video again. 4. Oooooh, that’s what he meant last time I watched it. 5. Slowly work towards

@romi9485

3 жыл бұрын

Oh man, I think this is what I need! I average around 50 sec with a couple different methods (including CFOP), this video has a whole bunch of tips that I haven't seen elsewhere :)

Nice, it gets straight to the point.

Literally I can always solve now in 30 seconds. This video was really helpful. ☺️

I was solving the 3x3 cube for about year, each time with the only beginner's method which I learned. And I had unintentionally practiced so much, that I forgot all the algorithms and my hands moved automatically. And I noticed this when I tried to teach the beginner's method to someone. Now, i am learning CFOP and trying to practice continuously so that I again build a new muscle memory for all the new algorithms that I learn.

@officialkx3177

5 жыл бұрын

Shantanu Kulkarni same my muscle memory was doing it by itself

@moosaalabri9308

5 жыл бұрын

Omg .. today it also happened to me I tried to teach someone how to do yellow cross.. I couldn't remember the algorithm.. but I can do it so fast .. I don't how that's come 😅

@armaanverma5533

5 жыл бұрын

Same here

@luk3_458

5 жыл бұрын

My channel I was going to do 3x3 until I came across the same problem.. LOOK AT PTHRR CHANNRLS YAY SOLITION

@user-cm9tc5zz5r

4 жыл бұрын

Omg same bro

Before: turning fast but still sub-40 After: turning slow but sub-30 Thx J Perm

@epicuber1351

3 жыл бұрын

Yanita Y same! So true!!

@Rishab-nb4zg

3 жыл бұрын

Yes even i note that whrn i solve

@trunguyvit

3 жыл бұрын

me:turning fast and sub 30 why:((

Thanks! Helped me a lot

I didn't learn beginners method from this channel, but now its the first one I go to for new puzzles and new methods

What have I been doing all my life. God bless this man!

Tnx! This is the best video by far that helped me get to sub 30!

I do my cross downwards and plan the whole cross during inspection, I’m colour neutral, do 2 step f2l, 2 step OLL, 2 step PLL. And I have a Gan354, just because I wanted something smaller, pretty quite and I knew I would practice and enjoy learning more if I had a cube I really enjoyed practicing with. I used to avg 45. I learned two new OLL algs and dropped to 38, with a pb of 32. I plan of adding two more OLL algs so I have 6, then add like 2-3 PLL algs. And then do what I think I really need to do which is improve on f2L, and not do layer by layer. For me personally it has worked best for me to learn 1 alg, get that movement completely in mussel memory, then learn one more alg. Then just practice normal cubing for a few days with those 2 algs, so those really stick before learning more. I tried learning quite a few algs before. But I think I tried adding to many in too short of a time and not enough practice. So after a week of not cubing I only remembered the beginner method.

@dalilahdarancou2335

2 жыл бұрын

Alright man. Just remember that two step-X is good to even get sub twenty! Practice is everything,but learning new algorithms is not out of the picture. Practice can take you to better times than learning full F2L OLL or PLL.

Thanks, this really helped me out :)

Honestly you’re the only one that can teach

great video as usual! you've motivated me to start planning my crosses again lol. I've gotten so impatient with it that I rarely plan anything before I start. its turned into a really bad habit :(

@JPerm

5 жыл бұрын

improvement will feel better than getting more solves done!

@graceg.6040

5 жыл бұрын

@@JPerm so inspirational lollll

you motivated me to start cubing and i will use your code JPERM when buying my first cube

The best intro of all time. Number 1

It's so good when f2l lookahead naturally kicks in.

Currently: sub 20 Goal: sub 13 by new year!!! Hope I beat my goal!!!!😃😃😃😃🎉🎉🎉 Edit 1- I am now sub 15 as of 2nd December

@e-clipse9202

5 жыл бұрын

Speed Rubriker good. Luck 😀😀

@ExternalGod

5 жыл бұрын

Speed Rubriker I’m going for consistent sub 13 at comp at least as well. Goodluck!

@chirag_2447

5 жыл бұрын

How to be sub 10

@tjryan339

5 жыл бұрын

Good luck👍

@siddhantbagchi4131

5 жыл бұрын

@@e-clipse9202 Thanks 😃 Appreciate it

Thank you very much because your videos are so helpful

I’m coming back to this video around six months later. Just remembering I though that I could never get a sub 30 second solve. I’m now sitting at 18.8 second AO100. This video helped a lot.

I knew that I got pretty good (from my standards) on 3x3 but never had a time under 1min because of how bad my cube was, when I bought a good one I went from 2min30 to less than 1min, now it’s been 2-3 weeks since I practiced everyday and now im at a little less than 40 sec, wich im really proud about. Thank you so much, all bcs of you

@dr.nishiddhagupta5510

Жыл бұрын

whicb cube you purchased?

@fellachad9635

10 ай бұрын

i got from suffering to get 50s to 32s in the first day i bought my tornado v3 and my time was like 30-42s now after months of just doing my fav pll case and not solving it im stuck at 40s lol

start straight into the video. Jperm: Number 1 Me: Wow

I already knew CFOP but after watching the first tips, in only 5 solves a got a sub 30 with good rng. Thanks, J Perm!!!!

yay! finally sub 15!!!! I'm so happy ty jperm

I got to the point when my cube is the problem 😂 it cant corner cut but i can still ave. 40 seconds hahahaha

@skycloud5387

4 жыл бұрын

My cube can't corner cut yet my avg is 34 👀👀

@xuhax3156

4 жыл бұрын

My cube can't corner cut but i avg 25

@anshumanagrawal346

3 жыл бұрын

SCR In 1 of his videos showed that no matter what your cube doesn't affect your times much, he used a Rubik's Brand with no set up whatsoever and his average only 1-2 seconds slower than his normal average

@real_rx44

3 жыл бұрын

the cube has nothing to do with it trust me I went from a rubiks to a gan and I only improved 4 to 5 seconds

@AAA-de6gt

2 жыл бұрын

@@real_rx44 You have clearly never used a 2007 cube. I switched from one to a reduced 5x5 and improved about 15 seconds.

Thank you! Your guide worked, it got me to sub 30 minutes!

@isaiahjoseph8502

5 жыл бұрын

Lmao!

@rameshdevanur1942

4 жыл бұрын

Cmon man you're indirectly insulting jperm

@logancriss1319

4 жыл бұрын

I hope you're sub-30 MINUTES, it would be kinda sad if you weren't

I'm getting so much better best time is 1 Minute 10 seconds so proud of myself starting to leave the beginner method and use faster solutions thanks

I love JPERM, him, cube head and soup Timmy inspired me to make my own Chanel thank you JPERM for all your inspiring vids

Hi All, 60 Year old dude here wanting to solve the 3x3 in under 1 minute. I just use the basic method right now, but I'm working on F2L. I can do F2L VERY slowly right not because I keep having problems with the last corner. Help anyone? I started solving the cube late last year then got discouraged when I could not get my time down to maybe 3 minutes. Just stared back last night. 1 minute is the goal. I don't have a ton of time to practice. Good luck to all of you! :-)

@laputin5958

5 жыл бұрын

Good luck!

@chessdude67

5 жыл бұрын

@@laputin5958 Thank you!

@elvo1

5 жыл бұрын

I can solve the cube just with beginner method in 30 seconds. You shouldnt learn oll or pll, im sorry, but practicing is the best and only way to get sub 1 minute. Often F2L is the Part, which most people need the most time, so its good to learn f2l, and then time yourself for each step; Cross: max. 8 Seconds F2L: max. 27 Seconds Yellow Side Top: max. 12 Sec. Yellow Side Side: max.12 Sec. =59 Seconds Also Handtricks a very, very important, because you have to handel cube as fast as possible. But thats just practice Then you can start Learing 2 look OLL and 2 look PLL, because every second is hard and long work then. And then at least full OLL and full PLL, and then you can get sub 10 :D Just my opinion. Hope I could help you :D and good Luck! My English may isnt the best, because im from Germany. :D Best Regards.

@chessdude67

5 жыл бұрын

@@r33bad Thanks for the advice. I do have a very nice Gan speed cube. But, I'm using all wrists for turning the cube. I look like a gorilla, lol! I need to get my fingers working. I'm a drummer and a bass player, so I know I need to practice getting them moving if I want to get a much better time. Thanks. Take care.

@chessdude67

5 жыл бұрын

@@elvo1 Thank you very much for taking the time to help me reach my goal. I will work on the things you shared with me. Thank you again! Peace!

Bro you are a hard working cuber.👍👍👍👍👍👍👌👌👌

Thanks for sharing your knowledge

Ur videos r amazing helped me a lot to get better

Hi J Perm thanks for the content :D I have a video suggestion (i'm not sure you did an in-depth guide): "How to deduce where your F2L pieces are" Sometimes I have a White/Red/Blue angle in front of me. On the back face I see two blue stickers. i'm sure you have tips to choose the correct one without rotating/looking at the B face. Or maybe you just look at the B face and it isn't such a big deal ???

My times: Cross: 7 sec F2L: 18 sec Oll: 4 sec Pll: 4 sec

@justeenleidioso2150

4 жыл бұрын

Cross-7 sec F2l-24 sec OLL-6 sec PLL-4 sec

@justeenleidioso2150

4 жыл бұрын

I do not have a brand cube so thats why my last layer is slow

@hvrst6241

4 жыл бұрын

Me: Cross: 2-4 F2L: 8-10.5 OLL: 3 PLL: 2.5 (4 if 2 look)

@someguyontheinternet2544

4 жыл бұрын

Cross: 2 F2L: 18 LL: 9

@sybrenvandenakker9064

4 жыл бұрын

cross 3 F2l 8 Oll 3 Oll 2

That look ahead advise saved my life! I was so stressed out with it

Yeah my cross is also the slowest part. J you taught me how to solve and this is the best video dude. Thanks to you I did just sub-30, 3 times in a row. God bless you homeboy

2:01 the whistle killed me😂😂

I your thinking about the next step your thinking Mind blown 🤯

How impressive it is to see a man getting from 1K sub to 1 million just by making cube videos! keep it up my man, you would be world famous in no time.

I already am sub-20 using cfop but i'm watching this. Great content jperm!

Thanks for the awesome video! Quick question: the black cube you use at the end, is it just a regular cube that you removed the stickers from or is it a special practice cube of some sort? Would you believe a cube like that would be a good thing to practice with to improve the cross (as it helps visualizing the cross better), or it doesn't matter and it's just for teaching? Thanks again! :)

@om05472

Жыл бұрын

i know im 2years late 😂 but its a gan monster cube. he did not peel the stickers off

@babylettuce

Жыл бұрын

@@om05472 Thank you! :)

Thank you for this! Not everyone averages Sub 10-15. This tutorial is definitely helpful for slower solvers. I average low 20s and PB is 15.69 but still this is great

@RushTornad0

Жыл бұрын

Same bro! I avg 23 but pb is 14

@RushTornad0

Жыл бұрын

Also welk done for 15 sec for other reply! 50% lower than your average

If u respond to more comments your subsciber rate will go up, ur the only person i know whose good at teaching on youtube. Keep going man it helps a lot 👍🏼

loved the video thanks.

0:00, A Legend was born

My times: Cross: 6 sec F2L: 11 sec OLL (mixture of 2 look and full): 4 sec PLL (full): 4 sec

@xqwoz

3 жыл бұрын

Same

@xqwoz

3 жыл бұрын

kzread.info/dash/bejne/oImlucirj6nXocY.html🤫

@trunguyvit

3 жыл бұрын

damn bro,you good at f2l and suck at cross

@VC-qe1rl

3 жыл бұрын

It isn't possible

@xAntisune

3 жыл бұрын

@@VC-qe1rl what the hell do you mean lol

Thanks for the help!!!!!!

Learned the Rubik's cube on my own in 1980 (pre Internet) and got my average time under 30 seconds. Holy Cow! What a world I've missed! Standardized jargon for one thing. I only vaguely became aware that my method lacked the ergonomics to compete with the best (and that was before I even knew what the word ergonomics meant). The science of cube solving has matured a great deal.

Your subscriber count is actually growing very fast! Good jo吧！ ：） Edit: Oops, accidentally mixed a Chinese character in there... Was holding down shift. And maybe just changed the language.

@baxtercrowley6488

5 жыл бұрын

Junting lol

@nugg3t382

5 жыл бұрын

Junting instead of editing to say you made a mistake, you should edit to fix the mistake

@sophieosu

5 жыл бұрын

@@nugg3t382 agreed

About a week ago I was averaging 5 minutes and now because of your videos I'm averaging around 1:10 with a PB of 44.40, much appreciation.

@part4ofjojosucks95

Жыл бұрын

Holy

@feminico2613

Жыл бұрын

nice

@coltthebolt4620

Жыл бұрын

Thats like the same with me

@djlr96

Жыл бұрын

Are you still cubing? Whats your pb now?

@goon-705

Жыл бұрын

@@djlr96 Currently I'm out of practice, however I think I got around 32.50. I have the exact number written down somewhere but I can't find it at the moment.

you are really helpful thanks

I started cubing about 2 months ago and I went from solving in 3 mins to solving in 50 secs on average. In the 2 weeks I've improved from 1:20 to 50 secs alone by basically just improving Cross and F2L only. I use the advanced method for f2l and beginners method for the LL. Going to start 2 Look OLL and PLL soon but I don't think it will make a major difference.

I solved my first cube a few days ago and it felt awesome haha. Thanks for the tips !

im sub 20 and i kinda found some things useful...

@paleontologi485

5 жыл бұрын

>Supercell gamer >Geomtery Dash pfp

@jamessmith4287

3 жыл бұрын

0.9777777777777777777777777777777777 is this a fun useful decimal? It feels just like the cube.

@Blade_of_Tomoe

3 жыл бұрын

@@paleontologi485 not anymore ;)

Thank you very much for this video J perm My PB is 19.67 secs but my ao5 and ao12 is around 39-49secs This is helping me improve a lot

@META313.

Жыл бұрын

How tf did u manage to do 19sec solve when u average 45 bruh

@anirudhjain2462

Жыл бұрын

@@META313. My average has improved it is now b/w 22-31 secs Idk it just happened Even I was pretty shocked

OLL and PLL was pretty easy to do for me but F2L and cross are those in which I am dumb so this video realy helped me lot

i'm not a speedcuber but my best time is about 38 seconds... thanks for making this video: it helps me so much... i'm from italy :-)

@twistiicuber1055

4 жыл бұрын

Riccardo Faccin you don’t have to average a certain time to become a “speedcuber” :)

@zecrom7777

4 жыл бұрын

What a coincidence my pb is 37 seconds!

@zecrom7777

4 жыл бұрын

And i've been cubing for nearly a month!

@mitakandoria3875

4 жыл бұрын

@@twistiicuber1055 I see you everywhere.

@twistiicuber1055

4 жыл бұрын

Mita Kandoria hello!

2:28 How do you do that alg that fast?!?

@samaron

5 жыл бұрын

Finger tricks

@mystikios6889

5 жыл бұрын

Both

@davidsaric9598

5 жыл бұрын

Practice and good cube

@r8a56

5 жыл бұрын

A bunch of human muscles moving at extreme speeds to move a particular layer of a puzzle object to get the last layer solved at the speed which we can comprehend as fast this is achievable through muscle memory and a well lubricated cube. Muscle memory can be achieved through hard practise of a particular move or algorithm. There I wrote a big comment.

@isaacnewton7424

5 жыл бұрын

I love alg

I've been cubing for approximately 3 weeks and I use 2 look oll and 2 look pll, I'm averaging 1:30 at the moment coz I've only just memorised the algs but I'm loving this. I noticed I have muscle memory for certain algs if they flow better, like I LOVE the adjacent corner swap alg it's like second nature to me, I do it in the dark in bed lol others I have to think a lot still. Such an interesting hobby though! Edit: also cubing with SNS nails on makes finger tricks MUCH harder fyi 😂😂

@angel_withaflamethrower

Жыл бұрын

learn full pll

@chesschad81

10 ай бұрын

@@angel_withaflamethrower Not necessary at all.

Thanks for explanation

I've Started Cubing Like 4 Months Ago I Started With the Beginners Method And Was Averaging Around 45 Secs Then I Learnt F2L Then My Times Dropped Drastically to nearly 34 Secs Then I Learnt CFOP 2 Days Ago My Average is 31-33 Secs My PB is 19 Secs Idk How Tho The Problem With Learning New Methods Is That It Makes You Slower Than Before

@ballistic2513

Жыл бұрын

until you master it tho

@applerd209

Жыл бұрын

I nearly follow the same trend

@ZIO-Techz

Жыл бұрын

Yes Now I Averaged Sub 30

@AqM_Cyclic

Жыл бұрын

Full CFOP with all OLL and PLL algs???

@ZIO-Techz

Жыл бұрын

@@AqM_Cyclic yes

Oh wow man that splitting your times concept is something I've never thought of. Thanks for that! I took up cubing at the start of this year and I can't believe how much I enjoy the challenge of improving my time. Nowhere near 30s yet lol, but can see it on the horizon.

Thanks for the tips, right now I'm averaging around 35 so I know sub 30 is doable but I just needed some tips and these helped!

Oh thank you 🙏🏻 ❤❤❤❤

OMG I NEEDED THIS SO MUCH LAST WEEK. I LITERALLY BECAME SUB 30 FEW DAYS AGO. NUUUUUU

@perkonm

5 жыл бұрын

Way to go... if we follow some of these tips maybe we can both reach 22! Im still at 38. Just started practicing again though

I take 2-4 sec to solve cross and approx 8-10 sec for last layer but i take 20-30 sec for f2l

@prestonking1848

4 жыл бұрын

same

@FelUnity

4 жыл бұрын

@@prestonking1848 no

@paulmarchi1393

4 жыл бұрын

@@FelUnity Why not ?

@FelUnity

4 жыл бұрын

@@paulmarchi1393 no

@paulmarchi1393

4 жыл бұрын

@@FelUnity Very well sir

i just like how he doesnt have any inros and he's not like other youtubers like other youtubers say the tittle for 2 minutes and he directly startes his video ........i started my journey with the help of your video first i do sub 1.30 and now.....only in 2 months...i'm sub 25...salute to u J Perm

thanks bro...appreciate it

I finally got sub-30 because of this video. I got 25.05 seconds! I will keep learning new techniques and try to get faster.

@Sharp-bc3rr

Жыл бұрын

It's been two years how fast are u now?

4th. Love your Videos!!!

Finnally became a 28sec avg solver, Thank You J Permm✌️

I started 10 months ago and I my pb used to be 37. Now it’s 14 thanks to the Weilong and you!

I learned advanced F2L yesterday.Now my average is 27 seconds.Thank you for this video.

My personal best using the beginner method was 36 seconds and I got an extremely lucky scramble

@jamalnicholas9636

5 жыл бұрын

Nice mate

@hvrst6241

4 жыл бұрын

I use 2 look oll and begginer method I solved my cross 2 sec and got pb (23.46)

Just about 10 days back, I was totally unaware how to solve Rubik's cube but now I can and today I thought that can i make a shape with Rubik's in way that all borders are off same colour and only centre is of different colour on all 6 sides and guess what, i finished that shape completely accurate. Its looking very gorgeous.

You are the best teacher in the world