Hey Ben! You are making by far the most useful videos in terms of motorcycle maintenance & mods. All of your videos are to the point and very well narrated. Thank you so much for you efforts to explain each and every steps involved in the process. I am facing the fogging issue with my instrument cluster and this videos solves the problem. Can you update on how is the silica bag working till date for you?

@ONTWOWHEELSBEN

3 жыл бұрын

karthik prabhakar Thank you Friend for taking the time to acknowledge the effort . Means a lot . You will have to change your silica packs every 3-6 months depending on exposure to rain . Also I always cover the instrument console while going for a jet wash.

Hi Ben rather than opening the headlight assembly I remove the 4 screws of the windshield and easily have access to the console using a ring spanner size 10. Once all the 3 nuts are are removed I slightly pull the speedo in the upward direction and remove the connector. It makes it much easier standing rather than doing it sitting looking upwards. At the same time I also inspect the windshield rubber inserts if there is any vibration and replace them with new ones. Thanks

@ONTWOWHEELSBEN

3 жыл бұрын

Dear friend, there is a reason why I did what I did . I don’t mind sharing with fellows who ask .

Excellent thank you very much clean clear and concise instructions,

@ONTWOWHEELSBEN

4 жыл бұрын

glad it helped.

Bro it's really good to hear your voice. Deep and crisp voice and very informative, Keep it up.

@ONTWOWHEELSBEN

3 жыл бұрын

thats kind of you to say that . thank you friend.

Keep doing videos.. shows you have very good knowledge about the bike and keep it up ♥️

@ONTWOWHEELSBEN

4 жыл бұрын

thanks friend. will keep you guys engaged for sure.

Hi brother, is there a solution of needle sweep not happening in my RE himalayan.

Great tip as always!! Again...thanks so much for the tutorial!!

@ONTWOWHEELSBEN

3 жыл бұрын

Glad that these videos help.

hey Ben, great video, i was wondering if you can share the link to purchase Rubber gasket maker product, or any particular specification of product

Thank you for sharing your knowledge. This console on my Himalayan has accumulated lot of dust and the speedo meter needle kind of dances (jumps quite a bit), would simply opening up the console and blowing bit of air and then slightly pushing the needle help?

@ONTWOWHEELSBEN

3 жыл бұрын

If the needle jumps , then you are looking at servicing / changing the speed sensor on the wheel . On a side note . Pull out the speed sensor’s connector blow air into it and put it back , also inspect the wire for cracks .

Hey sir recently i got my bike water washed ,but after that my instrument console is not working and rpm meter has got stucked.can you please help me with a solution

Nicely done👍

My dealer in Germany has new information's about this problem. He said to me, if we change the console now, I will have the same problem a few weeks later. Enfield improve the console so it will be waterproof and dry inside. I will wait now for the new part.

@ONTWOWHEELSBEN

3 жыл бұрын

not sure about that as the latest 2021 himalayans also have this problem. i believe its a component flaw in the speedometer (could be design, hardware, o ring etc). So help yourself with solutions and be stress free.

@marinabrennecke5495

3 жыл бұрын

@@ONTWOWHEELSBEN I have the 2021 Himalayan, 3 weeks old.

Too good bro thank you very much its usefull especially in rainy season

@ONTWOWHEELSBEN

4 жыл бұрын

glad it helps

Awesome video bro will definitely try it out !!!

I have a 2020 Himalayan with only 430 kilometer's on the clock, and am now experiencing the same thing. When it fogs up, I can't see the readings on the digital display, current gear in particular. I wonder if I can get this fixed as you have demonstrated, when I take my motorcycle in for its 500 kilometer service. Since it it seems to be a common RE Himalayan issue.

@ONTWOWHEELSBEN

2 жыл бұрын

YES YOU CAN .

@manfrombkk

2 жыл бұрын

@@ONTWOWHEELSBEN thanks Ben, I showed your video to the service manager this morning. Hopefully when I go in Friday that will do the repair.

@ONTWOWHEELSBEN

2 жыл бұрын

@@manfrombkk its an easy job. but get yourself a good quality silica pack. and the right size too

It's been a year since you did this fix, how is it working? Great video. useful

@ONTWOWHEELSBEN

2 жыл бұрын

Watch my latest video on the same .

Ben what about the console rattleing and vibration?

@ONTWOWHEELSBEN

Жыл бұрын

Change the rubber grommets that hold the instrument console once every year

Bro what was the cost for your topbox , it's looks pretty awesome. This is good and informative video.keep it up .

@ONTWOWHEELSBEN

4 жыл бұрын

jazeel Shahbas 5500 rs . Coocase . I have made a video on my mods . Pls watch it for more info

@jazeelshahbas7177

4 жыл бұрын

@@ONTWOWHEELSBENyeah I watched your almost videos yesterday itself . I didn't noticed the price . Fine From online you bought it right or offline

@jazeelshahbas7177

4 жыл бұрын

@@ONTWOWHEELSBEN I have MT helmet thunder 3 sv . I just want to know will it fix inside or what and adding one more will this top box affect aerodianamics.

@ONTWOWHEELSBEN

4 жыл бұрын

@@jazeelshahbas7177 pls buy a 30 ltr top box from coocase. my model is no more manufactured (27 ltr) and no it will not affect aerodynamics.

This idea is mind blowing.

This DIY is the biggest requirement as let's hope it will succeed and make us relax

@ONTWOWHEELSBEN

4 жыл бұрын

EXPLORING FOR PEACE 100% it will .

🇧🇷 Obrigado pela aula!

Very useful one Ben.

@ONTWOWHEELSBEN

4 жыл бұрын

Shaji K.Damodaran thank you

Very good 👍🌹

this bike has abs or not bro tel me fast

Hi Ben, thank you very much for this video. Rather than having my cluster replaced under warranty for the second time and having the oddometer go back to zero I will try this fix. Can you tell me how effective it was please? Do you envisage having to replace the silica gel pack on a regular basis or did the gasket maker seal it effectively?

@ONTWOWHEELSBEN

4 жыл бұрын

Boreen Run you will have to replace the silica gel pack every 3-6 months . Depending upon the humidity , rain conditions in your area. Also apply a rubber based paste so that you find it easy to remove the cover the next time .

@boreenrun6238

4 жыл бұрын

@@ONTWOWHEELSBEN Ok, thank you Ben. So the sealant doesn't actually completely seal it. Is there anywhere else you think the water is getting in?

@ONTWOWHEELSBEN

4 жыл бұрын

@@boreenrun6238 in my case the water gets in through the micro cracks in the clear acrylic. it isint wide enough for just surface level cracks. what ever cracks the plastic clear screen develops, goes through to the other end in time.

Good effort

thanks, mine and my fathers himalayans will getting that mod ,

@ONTWOWHEELSBEN

4 жыл бұрын

Mark Strachan glad to be of help

Can you tell me the colour of console light on Himalayan Lake Blue BS6 ?

@ONTWOWHEELSBEN

4 жыл бұрын

Sayan Chakraborty bs6 is supposed to be white . Bs4 orangish yellow

Could you please say the name or brand of the rubber gasket maker

@ONTWOWHEELSBEN

4 жыл бұрын

Threebond gasket maker

Bro tell something about coneset a kat kat noise always comes from . I used ntn Japanese bearing maneuvering is smooth but I m thinking in chesis where is bearing fix it was loosen.

@ONTWOWHEELSBEN

3 жыл бұрын

Yes , if you have changed your cone set/steering head bearings more than 3 times your bearing Race will become wide and the play ( the noise ) will always be present no matter how tight your adjusting nuts are .

@mntherider8377

3 жыл бұрын

@@ONTWOWHEELSBEN thanks for reply tightening nut is full tight after that sounds comes. What shall I do give some idea.

Bro , please share the Allen key details which you used to remove the headlight set.

@ONTWOWHEELSBEN

4 жыл бұрын

size 5 or 6 allen key if i remember correct .

@guruparasubramanian

4 жыл бұрын

ON TWO WHEELS BEN thanks

Brother how much did the double take mirror cost you? On motousher when I am searching for the item, it lists as 3999rs , but I proceed for ordering , price changes to 14000 rs !!! .

@ONTWOWHEELSBEN

4 жыл бұрын

MrSudirising it is 14000

Nice 👍

Hellooo ben Wonderful videos mate.👍 I recently got my bs6 model and i am facing this issue, is that a permanent fix? Will it affect the warranty of it?

@ONTWOWHEELSBEN

3 жыл бұрын

you will have to replace the silica gel pack every three to four months as it will swell up with moisture. and yes this will void your warranty only in india just like changing to any other brand of oil other than liquid gun will. RE service, warranty policies are crazy in this country alone.

@BandaTravelGrapher

3 жыл бұрын

Thanks a lot for such a detailed answer 👍 Keep going on All the best ❤️

The Interceptor 650 has the same problem.

Fantastic !!!

@ONTWOWHEELSBEN

3 жыл бұрын

😁

Good thinking

@ONTWOWHEELSBEN

3 жыл бұрын

Glad it helps

My fuel meter us not working 😥😥 what to do please

@ONTWOWHEELSBEN

3 жыл бұрын

remove the fuel pump and clean it well . clean all the rust and things will be fine.

@Hse709

3 жыл бұрын

@@ONTWOWHEELSBEN do you have any video on this

Sottotitoli in italiano? Ottimo lavoro

@ONTWOWHEELSBEN

3 жыл бұрын

i pls mi chiedono i dubbi. risponderò qui

Man this is a 3lakh rupee bike in 2022. What the duck am I seeing with my eyes?? Silica packet fix? Absolutely no chance I'm starting a scrap garage in my home after spending 3 lakhs.

Or you can just remove the windshield..

why not remove the windscreen to get at the instrument cluster , much easier !

@ONTWOWHEELSBEN

4 жыл бұрын

trying to wiggle the consoles wiring harness socket out is a really sensitive job and the best way to pull it out is with a clean downward force . So by lowering the headlamp casing you have the right access to the socket .

@antonyross9957

4 жыл бұрын

@@ONTWOWHEELSBEN one would think enfield would have sorted it out by now and all the other problems with the bike, mine is back at the shop for warranty repairs again !

@ONTWOWHEELSBEN

4 жыл бұрын

Antony Ross let me know if you want any help with sorting out things on the bike . Have a good day .

Hi

@MSen-ym6ez

3 жыл бұрын

How are you. Can i get your mob no. I want to talk to you about my bike. Or can i call me on 8447107391.this my wats up allso

@ONTWOWHEELSBEN

3 жыл бұрын

@@MSen-ym6ez kindly Whatsapp on 9962693431

@abc60ify

2 жыл бұрын

@@ONTWOWHEELSBEN informative

How the fuck you have only 6k subscribers

Surely be easier to take the screen off ?

@ONTWOWHEELSBEN

4 жыл бұрын

yes but access to the socket to the speedo console is limited and you surely dont want any twisted pins later.