Royal Enfield Himalayan 411 Battery swap and modification
Whilst working on the 2021 Royal Enfield Himalayan , when the starter button is pressed the is a clicking sound but the starter motor does not turn , I check the battery and the voltage was at 12.2V which is low and I had a new battery in stock so I decided to change it, the plate that holds the battery in place was very difficult to remove due to it fowling the wiring on the left side, this quick modification makes it much easier to get on and off.
Пікірлер: 3
My Dec 2023 / 850 mile Hym411 had same, marginal battery, notable voltage drop and slow return to max voltage. Fitted an Exide 9A battery, clearly 0.8 -1V more, BUT now occasionally does same but engine management comes on. It can be cleared after 4 more re-starts. Has been REnfield collected and taken to dealer - they agree with fault advise all electrics ok, say fault is marginal battery, needs overnight top 8ps. New battery was not used . This RE to dealer advise no fault found - except failed brake switch. So what is tye point of warranty. Cost to me £84 - WARRANTY? I collect bike tomorrow
Was it throwing up an engine warning light when it struggled to start? I got low voltage injector 1 fault code on my scanner, on start up, then replaced battery and fault has gone. I have fitted the tec cam so its lost the decompression cam which adds more strain when starting so needs decent battery.
@championmotorcycles4873
7 ай бұрын
No, it's just occasional not engaging the starter motor, I put a second hand solenoid on it but still just clicking on a relay under the seat, can't work out which of the four relays is clicking and can't find a copy of the (euro5) wiring loom online.