I just finished building the handrail on my deck kzread.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!

This is a valuable addition to my woodwork collection kzread.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

I have just completed my router lift mechanism based on your approach, so thanks for the simple but effective way of raising and lowering the router in the table, it works well enough to be enjoyable

That's the best Lift-Modification i have seen in month. Thoughtful, easy, cheap and perfect working. Great!

What a great design, especially for the small home shops that don't have a lot of money. Thanks for sharing. The camera work is excellent too!

Well done! And so much cheaper than an expensive brand milling table insert module. Greetings from Germany Chris

What else is there to say but, BRILLIANT! What a space saving solution, so clever. Well done, and thanks for sharing this build with us all...

One of the best router lifts I’ve seen. Also like the use of laminate floor boarding. Brilliant. . . You have a new subscriber.

What a fantastic solution for the mounting of the router. And what a good idea to remove one spring. Thank you very much

Смотрю с удовольствием Ваши идеи и видео, продолжайте в том же духе. Спасибо. Здоровья Вам.

Nice video, showing enough detail to be instructional, well don and thank you for posting. It is well worthy of the, almost, quarter of a million views in just over a week. Keep up the great videos.

Love the engineered materials. I use it for everything I can in my shop.

Finally, a solid solution. I've seen so many videos with wobbly wood made mountings...

Thanks, I made one following your idea. Used a Bosch 1600 I picked up in the USA many Years ago, now it has a new lease of life.

Best idea for a router lift I've seen so far Plus I do like your table saw technique, very safe, very sensible Thanks for sharing

Congratulations, it's the best diy router lift in the web

This is one of the best diy router lifts I’ve seen! Great video!

Brilliant!! Le meilleur système 'router table and lift' que j'ai pu voir sur KZread. Je continue à dire que l'utilisation des lames de parquet est géniale, Bravo. J'aime beaucoup vos vidéos ainsi que les idées brillantes utilisées pour un travail de qualité. Prenez soin de vous et de votre petite famille. Marc (Paris)

Sumptuously! Grandiose! The best of what I saw on this subject! Low bow! Thanks a hundred times! Already doing this to myself! Health, success and success, Master!

Super Idee, den Fräs-/Sägetisch aus Paneelen zu bauen. Dein Lift für die Fräse ist auch klasse! 👍

Brilliant! Thanks for sharing! I love the DIY look of your well crafted tools! Been thinking of mounting my router, and was looking for a way of adjusting it without having to crawl under the workbench.

This is really great work. Thanks so much for putting it for novices like me to see.

I appreciate that you shared these insights. My router is a Ryobi RE600. Over 30 years old and was made in Japan. It already has a screw for adjusting depth. But taking out a spring might make it run smoother. You provided some food for thought.

Great video - It shows woodwork and metalwork can live in harmony! Thanks for sharing your work.

Straight and simple! I’m gonna make one on my table saw. Really nice job bro

Здравствуйте!!! Отличный лифт. У меня такой же фрезер как у Вас. Всё собирался сделать лифт к нему. Теперь знаю как и обязательно сделаю!!!!! Спасибо за Ваше видео!!!! Мастер!! !)))))))

Ingenious and well executed. Great video and easy to follow and understand. Always wondered if there were people like me who like to combine woodworking and metalworking. Impressive skill set. Thanks so much

@daveredd9832

3 жыл бұрын

It is good to balance out ones skills.

Une des meilleures adaptation réalisée sur youtube et je les ai pratiquement toutes visionnées !!! simple, astucieux, bon marché et facile à réaliser. Bravo !!!

@MrLemaner

4 жыл бұрын

complètement d'accord du grand art super et simple, robuste! J'ai une defonceuse X krtaft qui est une cousine proche de celle ci, je l'ai aussi mise sous table mais moins costaud je suis sans cesse ennuyé je vais moi aussi tenter de retirer un ressort... Bravo!

You have given me a lot of inspiration with this video. You make it look easier than it is I'm sure. After watching other complicated and convoluted videos on how to use a plunge router in this manner I was coming up with an idea similar to yours. Now I know I was on the right track and you answered my question on how to get the bolt to the top of the table neatly and the absolute best way to attach it to the router. You have saved me hours of screwing around and hundreds of dollars. Excellent stuff thanks for your brilliance mate.

@dorisdreyer812

2 жыл бұрын

Der liftbau ist ist zu umständlich, geht auch einfacher und schneller

@amazingwood

2 жыл бұрын

@@dorisdreyer812 Wo finde ich die Anleitung dazu oder kannst Du uns das erklären?

Bravo l’artiste ! Une solution simple, économique et bien présentée. Merci !!

Sehr gut und einfach. Ich habe mir erlaubt den Lift nachzubauen. TOP ! Danke

Золотые у вас руки, мастер! 100 лайков!))) За каждое видео!

Excellent video and process the music volume was perfect. The whole d--- video was a Joy to watch. Thank you so much. Bless you... I've been thinking of upgrading my new table saw with a setup similar to yours. Your a great inspiration with to the point solutions. Be safe out there.

Neat job. Watching your video is like a therapy. Well made video and Idea. Thanks for sharing.

Its level of completion is high degree. You made well to use in woodworking and It's higher quality than things in the shop👍👍👍

I love the use of laminate flooring for the work surfaces. Guaranteed no wrapping

The best router lift I have seen, great idea thanks ☺️ will definitely try to build it.

Just wanted to say thanks this video help out a lot making my inserts, made the jig you did and worked like a dream

Simple great. Fantastic idea. Now I know what to do with my router.

Great video to get inspired of to build a router table! Love it and thanks again for this great content!🙏

What a simple design for lifting and lowering the router. Thanks for uploading. Best regards

This has to be one of the simplest router lifts I have seen built a great job.

Молодец, из доступного материала и всё по полочкам.класс!!!!

The best designed router insert and lift I've seen on KZread. Just great. Cheers from Queensland Australia!!

The sliding system of the router has convinced me a lot. I have it now with a car hydraulics and it is very bulky. Simple but effective.

Well done. Excellent idea, execution, and great video work.

Well done ! Congratulations from France

*One of the best router lifts I’ve seen.*

Great work ! You have a clever mind, good eyes and hands. You are si blessing ! Greatings from Romania, Mister !

Thank you very much for the interesting implementation of the router installation. I try to do the same for myself

I like the elegant simplicity of this design.👍 .

UN lavoro meraviglioso, che sogno di realizzare da diversi anni, ma i lavoretti continui a casa mi hanno sempre fatto desistere, penso che dopo il tuo imput comincerò a realizzarlo sicuramente Bravissimo continua così

Super job, this is the best solution so far. Everything looks solid!

I enjoyed your video and will use the hex nut bearing and coupler idea on my router lift - what a great idea and simple to use too thanks

Отличное решение! Постараюсь повторить тоже такой лифт 👍👍👍

Awesome! Was just about to build a tablemount for my router. Going to copy your solution from start to end. Brilliant! Only downside is that I will have to buy a new one to use as a handheld. Wait! Having an excuse to get new tools isn't a downside. Right?!😁

@dimakatsomookodi

2 жыл бұрын

yeah, everytime we mout handhelds means a trip to the power tools store 😀😀😀

Great effort and even better results. Congratulations!

If I have a workshop like this, I sleep in it. Well done !!!

Very very nice router table. I like the use of flooring material!

عمل جد جيد احترت كثيرا في كيفية صعود ونزول الآلة لكني وجدة في هذا الشريط الشرح الكامل اشكرك كثيرا واقدر لك هذا العمل 👍👍👍👍👍👍👍👍

I always want to do my plunge router like that, thank you

This is the best thing I saw this week. Awesome 👏

Dude has mad shop skills, nice work!

Ingenious! I think I have the same router -- going to try to use your design to try to set up the same. Many thanks for taking the time to film, edit and upload this!! Liked and subscribed!

simple, practical, and efficient... cleverly done.

Show!!!!! Parabéns. Vídeo mostra de uma forma simples e eficaz.

Great design and execution!

Хорошая работа! Все детали подогнаны хорошо. Буду делать по вашему примеру. Спасибо!

Great work, thanks for sharing this. 🙋🏼‍♂️

I only have one word about this video AWESOME

My prayers are answered.Found the perfect router lift build.Thanks mate for sharing.One good thing from the corona lockdown.WILL build it tomorrow- 28/3/2020

That's the simplest lift I've seen, Great idea.

@mikemiller9393

4 жыл бұрын

Nope, this is the simplest routerlift: kzread.info/dash/bejne/dn5oq7CAZ8inebA.html

That is FANTASTIC. I hope you don’t mind, but I’m going to copy that for my workshop. Thanks for uploading.

Amazingly simple solution. If I was going to build myself a router lift I would use your method. However I don't need the lift because I recently bought myself a Triton TRA001 which has a Lift mechanism. I will use your router table insert though. Great work.

Incredible! Great job!

Very ingenious and well executed. I've seen vids of people building cantilevered rising platforms, old electric drills and all manner of in between. Some of them amazing, some of them lamentable. Meh, that's KZread. Less is more. Good lateral thing and vision!

This is a masterpiece. Thank you

This is a great design. Many thanks for sharing!

Очень просто все и технологично лайк, прекрасная работа.

Slickest homemade router lift I have seen! Great job.

Well done. Very cool. Lots of functionality without a table.

Agree with some posters: good work, and the laminate is a real good idea.

@jwelberts

3 жыл бұрын

Jiibbbb

Fantastic! No show, no endless talking. Just pictures, who speak for itself! So ist has to be! Go ahead!

@uralaguza7618

6 ай бұрын

Все супер дякую.

Beautiful job, thanks for sharing.

I’m so impressed and motivated to reproduce what you have done, I’ve been reluctant to purchase the units for hundreds of dollars. 👍🏻👍🏻👍🏻👍🏻👍🏻

Отличный вариант. Спасибо!

Awesome work, well done! 👍

Nice job! Just what I was looking for. Thanks.

That’s absolutely awesome

loved your video and will take a lot away with me to build my own unit top effort keep going

Awesome built.

Un capó, hace rato que estaba esperando a que alguien me diera está idea. Gracias

One of the best instructional video on KZread, brilliant concept well done to that man

Very excellent idea and build. 👍

Nice!. Clever idea of using router as lathe! Never thought that.

@GRINwood

2 жыл бұрын

Thanks!

Top! for faster change of the reduction-rings you could use magnets...

@baltsosser

3 жыл бұрын

I like that idea. A goid Forstner bit and some Neodynium magndts embedded, and that change is easily accomplished.

@tinom.2455

3 жыл бұрын

@@baltsosser But consider, the reduction-ring could be catched by the router-bit and fly away like a sawblade. A solution could be to add an extra pin in the ring to prevent spinning

Ingenious, nice work.

j'aime votre video, c'est parfait merci beaucoup .

Неплохо, даже здорово 👏✊👍

Amazing work!!