Great idea ! I worked in a metal forming shop, we used a special metal called "KIRK SITE", it is like Aluminum, except it melts at 165. degrees Fahrenheit, we would heat it then pour it into tube or pipe then make the bends. Mostly in STAINLESS STEEL, then heat the piece and the KIRK-SITE would run out and the piece would be smooth without defects. Great Video. Greetings from Los Angeles. California 🇺🇸

@user-sq6in7ud9t

Жыл бұрын

Я заливал воду замораживал ,гнул ,потом лёд растает и вода выльется из любой конфигурации.

@ajwright5512

6 ай бұрын

Thank you for this: This was amazing to me, so I did some research - : Kirksite melts at 395°C (745°F), it looks incredibly useful - The stuff you were using appears as though it could have been Cerro Bend which melts at just 70°C (158°F) ?

@MrKrn558

2 ай бұрын

Have you ever tried sand? It's easy and efficient

સરસ સરળ અને ઉપયોગી આજ રીતે પ્લાસ્કિટ પાઇપ માં માટી નાખી બહાર થી હોટ ઘન વડે સરળ તાથી બેન્ડ કરી શકાય છે આભાર

Wwwwwoooowww !!! So amazing 😍 I haven't seen anything like it. You guys ROCK!

Thank You very much MD KHAN!! May God give you more blessing!! ❤️❤️

первая труба была с тонкой стенкой ) а у второй стенка толще) и согнуть ее без вмятин проще ) засыпь песок в первую трубу и посмотрим на результат)))))))))))

Nice thank you very much👍👍👍

Muy buen consejo utilizar arena para que no se desfigure el tubo... desde Colombia

Good job; congratulations.

Very good - thanks

I will remember this cool trick for sure! Thanks!

WOOO es una super máquina 🖒 podrías hacer un tutorial de como construirlo porfavor. Saludos de LIMA/ Perú 🇵🇪

@steelmastercfa5130

2 жыл бұрын

kzread.info/dash/bejne/mK2Y26aohJnfiZs.html

Bravo! Great!

Slick. I've watched something like this done with pvc pipe.

Bon travail!

Muchas gracias Maestro! 🙏

¡Excelente trabajo MD KHAN! Saludos

First tube was thin wall aluminum. Second tube was thicker wall stainless. (You can tell by the color of the weld) I call BS using sand without capping the ends TIGHT.

@briztol7748

Жыл бұрын

No this is working...i used it before

@rsz90182

11 ай бұрын

You taking something that works and dismissing it. The point of the video is to use sand to avoid the example given.

Tnx sa info sir

Gracias por el video al fin voy a doblar tubos correctamente....... Esa dobladora me gusta..... Si no es mucho pedirles detalles o planos.... Gracias😢

Great video, thanks for sharing #mrnams

great idea

Nice very 👍🏻

Bhai aap apna video kon sa category me upload करते हैं

Si tienes. Que hacer 100 tubos te lleva meses con ese sistema buena esa felicidades

Good ideas

Прекрасно !!!👍

Pour plier le tube de cette façon, il vous faut une olive,pour que le tube ne se casse pas, essayez avec une olive

Какая толщина стенки трубы?

Cambie la curvadora, trabaje con una bien diseñada y nunca deformo un tubo sin añadir arena .en produccion en masa no puedes estar perdiendo tiempo en taponar con trapos apretar la arena etc. Osea mala la maquina ademas esta mui lejos el punto de apollo, y pierdes tiempo en amordasar el tubo .lo digo con 5 años de experiencia trabajando con curvadoras curvadoras

@SHABRASH

4 ай бұрын

Which companies pipe bender you are using?

good to know

Add grease to the follower and it should improve a little

Good job keep safe stay connected

@steelmastercfa5130

2 жыл бұрын

kzread.info/dash/bejne/mK2Y26aohJnfiZs.html

Nice

It would be better if you use a pipe bending spring inside it so you can pull it out after you have done it on the bending machine you have olé.

Great

Awesome

Fst like🤗🥰

Não vem que não tem, o primeiro cano era muito mais fino que o segundo, quero ver ele fazer curva no primeiro mesmo com areia

@user-qp5iv3sv7p

Жыл бұрын

Actually the tubes were already replaced by one with a larger thickness.

Если немного доработать приспособление то можно без песка обойтись.

İlk boru alüminyum ikinci boru paslanmaz birde aparatınız eski çağlardan kalma .benim kendi imkânımla yaptığım aparat pürüzsüz ce büküyorum paslanmaz ve normal çelik.

Super

Kitne gaje Ka pipe hai

Bhia circle ka size kitna hai

Genius

The pipe which came out with fine bended is thicker than the previous one which was very thin but the guy did not show the thickness of the pipe but for first pipe he showed that it was thin

@buduchild

Жыл бұрын

you didnt get the point of this video? He showed you how to properly bend a thin pipe. And thats how you supposed to do it.

@WinterSoldier100

11 ай бұрын

​@@buduchildno, you

Super Arbeit 😂😂😂

👍

Best bending

Will any sand do?

Sand takes time, could easily convert this to a mandrel bender and be able to make bends with half the radius.

😊😊😊😊

这个我以前弯酒管永的设备

Офигенный инструмент - все из кривой, приваренной на соплях арматуры, на второй ролик денег не хватило.

Geniuses

You need to fill sand to be successful, that is because your technology is not good, so how much time will be wasted. You don’t need to fill sand, just change the shape of the mold groove and you can bend successfully.

Can we replace the sand that you put in the tube with mandrel

@robertthomas5906

2 жыл бұрын

No because the mandrel won't bend.

How do you keep your white cloth so clean?

@ntal5859

2 жыл бұрын

First you must wear the shirt for two to 12 months straight, this will allow your bodies natural body odour to linger and survive long after you remove it for washing[your body not the shirt] remember you didn't wear it months straight to wash out those built up grease stains, next find a third world country so dirty no one notices your stench or filth, once you have gained access and blended in with natives you begin to whiten you clothes[note the joke of using plural of cloth as we all know that one shirt is it] now the whitening begins, role in lots of dusty environments usually asbestos is good as impregnates your rags you will become more or less fire proof, then the final stage is to literally burn all that grease and fat out of the clothes as you enjoy the once a year bath in the nearest river/sewer and bingo fire proof clean rags which no one dares steals as the stench is your own unique flavour. Enjoy.

Hi, Why you do not use Mandrel for tube bending? it's very simple.

@iguanapete3809

Жыл бұрын

They can't even afford shoes is probably why.

@mehdiarab6189

Жыл бұрын

@@iguanapete3809 mandrel is very simple and chip, we need a round rod inside tube

يوجد افضل من هذا

Goodd

Pin kro bhai 😊😊

Ia kalau tidak di isi pasir pasti hancur

I wonder if compressed air would work the same

@Dorian803

Жыл бұрын

It would not work the same. Gas compresses

सिल्वर पाइप की मोच कसे निकले

Красота, вершина слесарного мастерства!

Machine ka naam kya hai

👍× 100000000

'smooth bend I'd grease up all the moving parts.

По мне так на 2.33 минуте лучше трубка загнулась, чем с песком!

Не правильно собрана. Можно без песка

Mashallah 💞💞

OMG Are you serious? I can't believe what I've seen! Black shoes and white socks? 😱

Kha se ho aap bhai

@MDKHAN-9907

2 жыл бұрын

Jabalpur MP

@Akil304

2 жыл бұрын

@@MDKHAN-9907 ओके भाई

If in doubt pack the pipe with sand first...

Hola

@MDKHAN-9907

2 жыл бұрын

Hola

Why did you use the wrong diameter of bending device? No wonder the pipe is folding like this…

Getting the rags and sand out is even more difficult. A better way is to heat the metal red hot then bend it. Much better method

Bahi ap Pakistan main dilevrey Kar sktay hain

@nadirkhanjadoonofficial4802

Жыл бұрын

Kia chahye apko?

@nadirkhanjadoonofficial4802

Жыл бұрын

Ye machine chahye?

We need wheel of dye

牛

Segala pake pasir ..bikin rumit aja ..ngak praktis...alat kurang mantap..

You gotta fill it up with sand.

🏴‍☠️🏴‍☠️🏴‍☠️

Or you can try filling it with sand

@MDKHAN-9907

Ай бұрын

Yas

15+15=25

Nadar send karo

Pahele vala pipe bahot halka tha 😄😄😄

@MrNams

2 жыл бұрын

😀😀😀 #mrnams

Are Naas he kar daya katye

I don't understand how that worked. When I use sand I have to crimp the end of the tube off or it'll simply push the sand out of the way. This is for things like a brake line or gasoline line and making those tight corners.

@donmunro144

2 жыл бұрын

Apparently you missed the part where he tamped the sand down after plugging the ends with rags. It does work. I have also filled them with water and froze them.

@robertthomas5906

2 жыл бұрын

@@donmunro144 I didn't miss that part. It doesn't work. I tamped it down with as much pressure as I can put on a 1/4" pipe full of sand. Even using a #5 hammer to drive a rod into it. I tried it dry, wet, it didn't matter. It simply pushed it out when I bent it. Rags won't hold it and I'm fairly sure they didn't freeze it given where they are and the equipment they're using. Maybe it's different with a big relatively thin pipe vs a small pipe. Even with a crimped end it still has to be a very good crimp or it'll push that out as well. That is, I can't simply smash it together with a hammer for example. I have to fold it over. That's why I'm asking here. I'm trying to find someone that has done it without crimping it. I have a lot more brake line to make soon and that pipe is expensive. I'd love to know how GM, Ford, Toyota, etc do it in the factory. I know it's done by machine. However, they still have to worry about it kinking. Maybe they can get away with heating it. The pipe I can buy has an external coating that is very good. However, I don't think it can take the heat needed to bend it.

@donmunro144

2 жыл бұрын

@Robert Thomas when I'm doing brakelines i use a pliers style bender for 3/16 & 1/4 in line. Then I have a die and shoe bender for up to 3/8 line. Anything bigger i normally fill the line with water and freeze it. Then bend it.

@rupe53

2 жыл бұрын

@@robertthomas5906 ... I do brake lines all the time, and yeah, I do occasionally kink one. The key to NOT kinking is holding pressure so the line stays in the groove of the bending tool. Depending on where the bend needs to be, sometimes it's better to put your bender in a vice so you have two hands to keep the work in the right place. In recent years I have switched to the coper / nickel variety line. So much easier to work with. BTW, I concentrate on the actual bends and if they don't line up quite right you can twist the tubing for a better fit. That's where the new stuff shines. Hint: remove the old line, place in on the bench, then use that for your template. If the line is more that 3-4 ft long make it in two pieces and add a union where it's easy to reach. (thinking about those GM lines along the frame rail) I usually do from the rear to the middle, and from the front to the middle, then do the union where they meet. (where you have room to work)

@dwaynejohnson6277

2 жыл бұрын

The radius of the bend should be at least 6x the diameter of your tubing to prevent kinks. I do brake lines and fuel lines all the time using a beer bottle. It gets you a variety of radius to choose from at the bottom of the bottle and along the tapered neck. Move the bottle along the tubing as you bend so you are bending a little in each spot. Use 1 hand on each side of the bottle holding the tubing with your 2 thumbs pushing on the bottle. No need for sand or special tools. Dont put sand in brake lines anyway

Use bol medarl

Pehele 22 gej phi 16gej

это для толсто стенного мать вашу

Дикари "изобрели" трубогиб

Ye 75 gaje ka pipe hai 😂😂

Samjga

Zonk 🤣

kalokohan, minipis yung unang tubo, yung pangalawa ay makapal at stainless pa

Pack sand in it before bending

@derekcollins1972

2 жыл бұрын

He did.

Apuliorlgaodaime

What a waste of time. With proper tool you can bend even 0.45mm thick tubes without shrink. We are doing it in hundreds daily