Use a drop saw with metal cutoff wheel. 37° for the male cut, 42° for the female. Trim off the blurred edge with snips and assemble. Perfect mitres every time 👌🏻
@peteraq55018 жыл бұрын
If I took this long to make one off set on a job, the boss would sack me. But very in depth tutorial.
@joeazzopardi93963 жыл бұрын
Just what I was looking for, thankyou
@petrock7733 Жыл бұрын
Enjoyed the video, well explained, learned much. Thanks for your time.
@MrTangaroa5 жыл бұрын
What is up with 7 dislikes... If you can do better show us bro... Send me the link..!! Thanks mate best video I've seen on utube..!!
@ssao0000
Жыл бұрын
Wisdom is carried by many
@andredehaan90062 жыл бұрын
Thank you for taking the time to make this tutorial, very good
@andydelarue9344 Жыл бұрын
Thanks for that. This is what u tube does well, and you have
@lionelhernandez34 Жыл бұрын
Most installers aren't patient enough to get this done. I'm often asked how I accomplish such clean mitred elbows, patience and lots of practice.
@joeyhoey29 жыл бұрын
Thank you for the very fine tutorial.
@magrethkambonde255 Жыл бұрын
We are doing these for practical assessment and now still struggling hope to get knowledge here
@kneewall493 жыл бұрын
Excellent tutorial. Didn’t realise how complex this task actually is. But if I want to use metal pipe, I guess this is the only way to make the bends?
@ssao0000
Жыл бұрын
No, its 1 of many
@nickchambers67173 жыл бұрын
Very patient tutorial video, but was it just me that noticed the strange word initialled onto the set-square ??
@ssao0000 Жыл бұрын
Nice, just 1 comment, why apply silicone only on the outside. Eventually with the downpours nowadays, nature will win pushing the silicone off outwards. With an avg. of 10mm to 80mm rain on 47m² for 100mm 1 side silicon downpipe ...
@eucalyptus1013 жыл бұрын
Surely someone makes a metal joiner for this purpose. Anyone? Anyone? Bueller?
@andydelarue9344
Жыл бұрын
Yes Anthony does and now everyone he has taught, great info
Пікірлер: 20
Use a drop saw with metal cutoff wheel. 37° for the male cut, 42° for the female. Trim off the blurred edge with snips and assemble. Perfect mitres every time 👌🏻
If I took this long to make one off set on a job, the boss would sack me. But very in depth tutorial.
Just what I was looking for, thankyou
Enjoyed the video, well explained, learned much. Thanks for your time.
What is up with 7 dislikes... If you can do better show us bro... Send me the link..!! Thanks mate best video I've seen on utube..!!
@ssao0000
Жыл бұрын
Wisdom is carried by many
Thank you for taking the time to make this tutorial, very good
Thanks for that. This is what u tube does well, and you have
Most installers aren't patient enough to get this done. I'm often asked how I accomplish such clean mitred elbows, patience and lots of practice.
Thank you for the very fine tutorial.
We are doing these for practical assessment and now still struggling hope to get knowledge here
Excellent tutorial. Didn’t realise how complex this task actually is. But if I want to use metal pipe, I guess this is the only way to make the bends?
@ssao0000
Жыл бұрын
No, its 1 of many
Very patient tutorial video, but was it just me that noticed the strange word initialled onto the set-square ??
Nice, just 1 comment, why apply silicone only on the outside. Eventually with the downpours nowadays, nature will win pushing the silicone off outwards. With an avg. of 10mm to 80mm rain on 47m² for 100mm 1 side silicon downpipe ...
Surely someone makes a metal joiner for this purpose. Anyone? Anyone? Bueller?
@andydelarue9344
Жыл бұрын
Yes Anthony does and now everyone he has taught, great info
8
@beergut8915
4 жыл бұрын
9