Is the off-road light switch a GM stock order item? And what would the P/N be? I have a 19 Silverado 2500HD Diesel High Country

@pristineautoclean

2 жыл бұрын

Yes it is a factory GM part, not sure of the model or trim level of the trucks that they came in. The part number for trucks with blue backlight switches is #84168423 (part number is different depending on backlight color) this part number is for a 2018, could be different for the 2019 model.

@leonardovidals3662

Жыл бұрын

@@pristineautoclean new part #gm 84448506 replaces previous

@jblanchette84

Жыл бұрын

@@leonardovidals3662 thanks for this man!

@TheIrishman79

Жыл бұрын

I had to pause and zoom in on the back of the switch to see the number it shows 2345849262430108 unfortunately for me I couldn’t find a blue backlight one so I ended up with a red one.

@elden8785

8 ай бұрын

@@TheIrishman79where did you end up finding one and how much.. how much for the wire harness and where from

Super clean! Super OEM+! Great job on the install!

@pristineautoclean

3 жыл бұрын

Thanks! 👍

Ordering these parts! Damn this is cleannn, sweet how to bro, thanks

@pristineautoclean

2 жыл бұрын

Thank you! Any questions feel free to reach out!

Clean install bro.

@pristineautoclean

2 жыл бұрын

Thank you! 👍

rite on man great vid!!!

@pristineautoclean

Ай бұрын

Thank you!!

Nice clean install. You could use a piece of copper tubing to push through firewall insert wire pull wire and remove tubing.

@pristineautoclean

2 жыл бұрын

Thank you! That’s a great idea, didn’t even think of that 👌

Nice clean job

@pristineautoclean

10 ай бұрын

Thanks 👍

Nice job. Thanks 👍

@pristineautoclean

2 жыл бұрын

Thank you!

This is a great how -to. Now all I need is a Silverado truck.

@pristineautoclean

2 жыл бұрын

Me too! Haha thank you!

Used you guide to install on my 2017. I had to grind down the back side of the grill and put the L brackets that connect to the light bar and mounting bracket in a vise to flatten it some. It was pushing against the grill too much and I couldn't clip it back on, it kept popping out.. haha.. thanks for the vid!

@pristineautoclean

6 ай бұрын

Glad it helped!!

I was looking to do the same to my 2017. Looked on RC website and that’s when I found out about AGS…which my truck has. I started to think about doing the same but was kind of iffy about it. Now i think i’m going to go through with it. Thanks for sharing!

@pristineautoclean

2 жыл бұрын

Your welcome! Thanks for watching!!

@js7news

Жыл бұрын

How did that's go ?

@pat14lang

Жыл бұрын

I’ve had it on over a year now. Removed the bottom two shutters on each side. Trimmed the edges up. Everything works great! Very bright!

First video I have seen for an install on a 2018 Chevrolet Silverado. Thanks for this. What is the part number of the OEM off road light switch, and where did you purchase it?

@jblanchette84

2 жыл бұрын

If its a 2018 with blue backlit its 84168423. They offered a different part # for the red backlit. We got this one thru private sale

Your video has helped sm! Did you put the back bracket behind the active grills?

@pristineautoclean

Жыл бұрын

In front

Nice job you did. I just got 2022 Silverado 1500. I would like to do the same thing on my truck. Is there anything out yet that would fit my truck.

@pristineautoclean

2 жыл бұрын

Thank you!! You'll have to do some research to se if they have a package avialible for your truck! The 2022s have a totally different front end so I doubt this kit will work for your application.

What wiring kit did you use from the Harness Doctor? You inspired me to do this to my truck.

@pristineautoclean

2 жыл бұрын

I didn’t purchase it, customer supplied it. Most likely under auxiliary off-road light switch harness

Great video and great job. However the RC light bars always fill with water on my trucks.

@pristineautoclean

2 жыл бұрын

Thank you! I hope that’s not the case with this one 😅 I’m going to check it out next time the customers vehicles in the shop

Which white BCM plug did you tap into? My 2016 Silverado has two under there: one right next to the brown plug and the other on the far end, near the brake pedal. I'm trying to figure out which one it should be. The one right next to the brown plug already has a wire in the #12 hole, but the one on the end has the #12 slow open.

@pristineautoclean

2 ай бұрын

Unfortunately it’s been so long I don’t remember. Try to pause the video and see which plug we used

I’d like to see a “how to” on washing and vacuuming a white 2021 Tucson

@pristineautoclean

3 жыл бұрын

Haha 😂 I think my car needs a wash before yours

Would this work if the battery supplying power to the light bar was an auxiliary battery, and not the same battery that supplies power to the button?

@pristineautoclean

2 жыл бұрын

If its still linked to the alternator I wouldn't see a problem. I would make sure the relay has the proper trigger wire coming from the switch. 12 volts is 12 volts, no matter where it comes from, the trigger from the switch just allows the 12 volts to flow to the item being powered.

Do you know if the check engine light has ever came on for the grille shutters after doing this? I want to do this but don't want my light on.

@pristineautoclean

2 жыл бұрын

As long as you don’t start the truck, or cycle the key while the shutters are unplugged you should be good. We made the mistake of doing that to see if our wiring worked, so it did come on in our case. We drove for a short period and shut the truck off and started it again and the light was off. Great question!

@jeremyjohnson8160

2 жыл бұрын

Thank you for the reply and very nice job. Ill go ahead and order my light bar. Looks straight forward.

@pristineautoclean

2 жыл бұрын

Thank you! Good luck with the install!

I have a 2017 GMC Sierra 1500 will this same switch and wire harness work for my truck ? If so please send me a link ty.

@pristineautoclean

2 жыл бұрын

I believe it should, the harness is from harnessdr.com and the switch can be purchased from a 3rd party source (marketplace, eBay, forums, etc) search the comments on this video for the part number. There is two different switches depending on your trucks lighting color.

I have a 2016 Chevy Silverado Z71 1500 . We're can I order all the parts that you used?

@pristineautoclean

Жыл бұрын

Rough country for the light bar kit, harness DR for the harness, and forums, eBay, marketplace for the switch.

Hey bro do you know what Guage wire it was used? I did mine but switch doesn't work. Probably not programmed

@pristineautoclean

11 ай бұрын

Honestly no idea, nothing is crazy high voltage, I’d say probably 12-14 gauge would be fine. Just check the amp draw and make sure

Hello do you know if that switch can be used with out connecting to BCM?

@pristineautoclean

10 ай бұрын

I’m gonna take an educated guess and say no.

What was the length on the M6 bolts used to mount that bar to the GM receiving holes?

@pristineautoclean

9 ай бұрын

Honestly not sure. 1.25”? Sorry it’s been so long and I grabbed bolts I had lying around

@jilano6376

9 ай бұрын

Thanks. Hope to have my same setup installed soon. Awesome step by step video!!!!!

What's that tool called you used to shave the plastic down, I'm drawing a blank

@pristineautoclean

2 жыл бұрын

Right angle die grinder

Do you have the part number for the off-road switch?

@pristineautoclean

Жыл бұрын

Read the pinned comment! Questions already been asked 20x

What factory lighting option is this "unicorn" headlight switch for?

@pristineautoclean

2 жыл бұрын

I did a quick search and couldn’t find anything definitive. I would assume it came in the higher trim levels or the “off road” models

@Guillotines_For_Globalists

2 жыл бұрын

@@pristineautoclean Interesting as I have never seen one with factory off road lights.

@eldenseib3871

2 жыл бұрын

@@Guillotines_For_Globalists got my switch yesterday they are 235 plus tax wire harness was 87 with tax and the light brackets I made my self with a plasma cutter

@Guillotines_For_Globalists

2 жыл бұрын

@@eldenseib3871 I only saw one on eBay for that price searching by part number alone. In contrast the standard headlight switch is around $40.

@markhilsen2700

2 жыл бұрын

@@eldenseib3871 That’s crazy expensive 😬

Where can I purchase the mounting plates? I can't seem to find them. Thanks!

@pristineautoclean

2 жыл бұрын

Everything in the video was included in the 14-18 silverado rough country hidden light bar kit. Customer supplied the parts so unfortunately don’t have the exact part numbers.

@carlos2044

2 жыл бұрын

@@pristineautoclean ahh ok, I have the light bar just looking for the brackets to complete the installation. Just having a hard time finding the correct brackets.

Can you tell me where to look for one of the OEM light switches please?

@pristineautoclean

2 жыл бұрын

I would check on eBay, fb marketplace, Craigslist, forums. Maybe the dealer, I’m not sure, they seem to be a “unicorn” item. The customer supplied us with the switch in the video which was purchased private parts. The part number for the light switch is posted in a reply on another comment.

@jblanchette84

Жыл бұрын

Updated part # 84448506

A lot of modification here, what I don't understand is why anyone wants a additional lights. First Off most Light Bars are for "Off Road" Only. Next is my 2019 LED Headlights, Turn Signals and Day Time Running lights and of course FOG Lights are bright enough to land Aircraft. So if you want the extra toy, Okay, but really need them?

@pristineautoclean

5 ай бұрын

We just did what the customer wanted!

@paulcondie2520

5 ай бұрын

Different strokes for different folks! Everybody is into different things! What you like I might not. 💯💯💯

Do you have a part number for that switch?

@pristineautoclean

2 жыл бұрын

Check the pinned comment reply in the comment section

Amazing Video!!!!. could you send me the link for the light bar you used.

@pristineautoclean

2 жыл бұрын

Unfortunately can’t find the part number but it’s a 30” rough country hidden light bar if that helps

@villatorot1996

2 жыл бұрын

@@pristineautoclean is it the curved one?

@pristineautoclean

2 жыл бұрын

Yes it is the curved one.

What was the length of the light bar

@pristineautoclean

2 жыл бұрын

You’ll have to check the rough country website. I believe this kit was for the 2016 Silverado 👍

I just did this to my 2015 Z71 and it didn’t work. 😒 The only thing I can think of is that the 2015 instrument cluster doesn’t complete the circuit. Maybe I need to now find a 2016-2018 cluster.

@pristineautoclean

8 ай бұрын

Yeah not entirely sure. I wouldn’t start swapping clusters for a light bar though. Maybe it was pinned wrong or something

@TheIrishman79

8 ай бұрын

@@pristineautoclean I doubt checked I got it pinned correctly.

@robertcohen5263

4 ай бұрын

The 14-15 doesn't have the wiring in the bcm for this to work.

How many inches is the bar

@pristineautoclean

2 жыл бұрын

30" curved

Can’t get that switch any longer. Every site a\says it’s discontinued .

@pristineautoclean

Жыл бұрын

Yeah I’ve heard that, keep looking you’ll eventually find one 💪🏼

i own a 2016 silverado and... im asking a serious question.... why the need of a light bar? i honestly never even had to use my high beam in the whole time i own the truck and im always on back road going to the rigs. i see this as less air to the transmission cooler and god know how shitty those 6l80/8l80 are.

@pristineautoclean

2 жыл бұрын

We are located in a woodsy area so high beams are used probably just as much as low beams. The light this thing puts out is insane!! Its nice to have extra light as the press of a button, plus we did it for content!!

Can you send me part list numbers and where can I buy it

@pristineautoclean

Жыл бұрын

Sorry I don’t have the part numbers

I have a question

@pristineautoclean

2 жыл бұрын

Shoot! We will do our best to answer it!