I take my new Turbo Timber Evolution for 2 flights on a perfect fall afternoon. Spektrum Smart Lipo - 3200 mAh 4s 50c Radiomaster TX16s GoPro Hero9 head mounted
Жүктеу.....
Пікірлер: 28
@salvadorandrade472 Жыл бұрын
nice job brother beautiful plane
@trondaustad8617 Жыл бұрын
Good job mr. First time is always scarry . But u nail it😊
@LiftVector
Жыл бұрын
Very kind words, thank you for watching. I'm hoping to film another Timber video soon!
@wernermoser3406 Жыл бұрын
Wow, the sky is totally sprayed, unbelievable!😓
@BillKisel Жыл бұрын
Very nice. I've got the original Timber 1.5. I've seen the EVO flown by one of our club members. Better featured and better flying than my original Timber.
@LiftVector
Жыл бұрын
Appreciated! I did quite a bit of research before buying this plane and it checks all the boxes for me, very happy. Have fun!
@danieldmytriw3276 Жыл бұрын
Love safe mode
@LiftVector
Жыл бұрын
Sure is nice to still have a plane. :D
@robertkummings6829 Жыл бұрын
As long as it's in one piece that's a good landing 👈🏽🇺🇲
@LiftVector
Жыл бұрын
I hear that! Thanks for checking out the flights.
@phoenixeasyrider6026 Жыл бұрын
Did you set up thrust reverse? Great flying! Good video for shooting it yourself. I want that plane.
@LiftVector
Жыл бұрын
Thanks for checking out the vid! I researched a lot and came to the conclusion that I would need extra hardware to connect to the receiver and TX16s to work together nicely, I'm not really sure...I wish I had thrust reverse setup, but it is a little too involved for me right now. Great plane if you have some stick time!
@lionelkeeping5097
Жыл бұрын
@@LiftVector look up "Stick Programming" for the Avian ESC and watch a couple KZread videos. You can find the ESC manual online and follow it to set the reverse thrust by listening for the tones as you progress through the settings. Took me a few tries to get it right but I got it working. I'm using a Zorro transmitter so it will definitely work on your TX16S.
@r.u.kidding8696 Жыл бұрын
I have same radio and just purchased the same timber. On model set up did u have any problems setting up radio ?
@LiftVector
Жыл бұрын
It was super easy! I found plenty of videos on here explaining it. I don't have reverse thrust without extra hardware/firmware and better tech knowledge, though. Good luck and have fun flying the beast!
@soosmate Жыл бұрын
BTW, if you feel like you need practice, use a simulator. Phoenix is free, good, and you can use your TX16s for inputs. It will teach you a LOT!
@LiftVector
Жыл бұрын
Awesome, thanks for the heads up! I'll search for it. Winter is coming, might be a good time.
@soosmate Жыл бұрын
Beware,RF signal low at such short distance likely means you have some radio issue. Did you put the antenna in the right direction on the radio? Should be 90 degrees, pointing straight up. Try to do a range test and resolve that issue or you may lose the plane :( It should give you low signal warnings at like a kilometre or more!
@LiftVector
Жыл бұрын
Dude!!! I'm getting sketched out about that. I'm glad you said something. I do have my antenna in a straight up orientation (I'll have a double check again after my hands relax). I might be pointing my hands down too far with the transmitter angled down or something. I'll do a range test and see if anyone else has this issue.
@Heinekeners Жыл бұрын
Excelente video amigo. Me puedes compartir como configuraste tu Radio Master?
@LiftVector
Жыл бұрын
Thanks! I found a lot of videos on KZread that explain it better than I can. That's how I was able to set it up, but it is fairly simple to bind! Try and do a search and you'll find it.
@Heinekeners
Жыл бұрын
@@LiftVector gracias. Me refiero al mapeo de canales y configuración de flaps.
@LiftVector
Жыл бұрын
@@Heinekeners So my flaps just ended up on channel 6 automatically after binding. Maybe channel 5. But if I remember I just assigned a switch to one of those channels and it was a 3-way flaps! :D
@Heinekeners
Жыл бұрын
@@LiftVector muchas Gracias
@gregmaggert85614 ай бұрын
How did you get safe mode on the radio master?
@LiftVector
4 ай бұрын
I watched this video. kzread.info/dash/bejne/dKmIwbZsdKi4mso.htmlsi=gy4UB5t4O226aZW9
@danieldmytriw3276 Жыл бұрын
What is acro?
@LiftVector
Жыл бұрын
No automatic leveling but the gyro is still processing (AS3X).
Пікірлер: 28
nice job brother beautiful plane
Good job mr. First time is always scarry . But u nail it😊
@LiftVector
Жыл бұрын
Very kind words, thank you for watching. I'm hoping to film another Timber video soon!
Wow, the sky is totally sprayed, unbelievable!😓
Very nice. I've got the original Timber 1.5. I've seen the EVO flown by one of our club members. Better featured and better flying than my original Timber.
@LiftVector
Жыл бұрын
Appreciated! I did quite a bit of research before buying this plane and it checks all the boxes for me, very happy. Have fun!
Love safe mode
@LiftVector
Жыл бұрын
Sure is nice to still have a plane. :D
As long as it's in one piece that's a good landing 👈🏽🇺🇲
@LiftVector
Жыл бұрын
I hear that! Thanks for checking out the flights.
Did you set up thrust reverse? Great flying! Good video for shooting it yourself. I want that plane.
@LiftVector
Жыл бұрын
Thanks for checking out the vid! I researched a lot and came to the conclusion that I would need extra hardware to connect to the receiver and TX16s to work together nicely, I'm not really sure...I wish I had thrust reverse setup, but it is a little too involved for me right now. Great plane if you have some stick time!
@lionelkeeping5097
Жыл бұрын
@@LiftVector look up "Stick Programming" for the Avian ESC and watch a couple KZread videos. You can find the ESC manual online and follow it to set the reverse thrust by listening for the tones as you progress through the settings. Took me a few tries to get it right but I got it working. I'm using a Zorro transmitter so it will definitely work on your TX16S.
I have same radio and just purchased the same timber. On model set up did u have any problems setting up radio ?
@LiftVector
Жыл бұрын
It was super easy! I found plenty of videos on here explaining it. I don't have reverse thrust without extra hardware/firmware and better tech knowledge, though. Good luck and have fun flying the beast!
BTW, if you feel like you need practice, use a simulator. Phoenix is free, good, and you can use your TX16s for inputs. It will teach you a LOT!
@LiftVector
Жыл бұрын
Awesome, thanks for the heads up! I'll search for it. Winter is coming, might be a good time.
Beware,RF signal low at such short distance likely means you have some radio issue. Did you put the antenna in the right direction on the radio? Should be 90 degrees, pointing straight up. Try to do a range test and resolve that issue or you may lose the plane :( It should give you low signal warnings at like a kilometre or more!
@LiftVector
Жыл бұрын
Dude!!! I'm getting sketched out about that. I'm glad you said something. I do have my antenna in a straight up orientation (I'll have a double check again after my hands relax). I might be pointing my hands down too far with the transmitter angled down or something. I'll do a range test and see if anyone else has this issue.
Excelente video amigo. Me puedes compartir como configuraste tu Radio Master?
@LiftVector
Жыл бұрын
Thanks! I found a lot of videos on KZread that explain it better than I can. That's how I was able to set it up, but it is fairly simple to bind! Try and do a search and you'll find it.
@Heinekeners
Жыл бұрын
@@LiftVector gracias. Me refiero al mapeo de canales y configuración de flaps.
@LiftVector
Жыл бұрын
@@Heinekeners So my flaps just ended up on channel 6 automatically after binding. Maybe channel 5. But if I remember I just assigned a switch to one of those channels and it was a 3-way flaps! :D
@Heinekeners
Жыл бұрын
@@LiftVector muchas Gracias
How did you get safe mode on the radio master?
@LiftVector
4 ай бұрын
I watched this video. kzread.info/dash/bejne/dKmIwbZsdKi4mso.htmlsi=gy4UB5t4O226aZW9
What is acro?
@LiftVector
Жыл бұрын
No automatic leveling but the gyro is still processing (AS3X).