just bought the same one. One thing I want to mention is you guys need a drill 9/32 inch to make holes bigger. The holes on the lip are really small and tight (I think the size of the original hole in the lip would be 1/4 or less) so the OEM clips don't fit. Also the lip is already prepared with 3M double-sided tapes so only thing you need is prep wipes to clean the surface of the bumper and 3m adhesion promoters. Definitely two ppl job unless you have your own ramps to lift a bit. It is super light weight!

@Banana69999

2 ай бұрын

Can you post link?

Was wondering how you went about drilling the lip. I plan on purchasing this but does the existing holes on the lip match up to all factory holes or did you have to drill those areas to use the factory clips?

very nice!👍 how easy to install?does it comes with bolts/nuts and double adhesive tape?

Finally got mine they restocked 2 weeks ago what drill size did you use to make the holes bigger?

Lip looks awesome!

​ @MTXSE26 Where on the side did you add the tapper screws? I just ordered mine this morning. Also, did you already wrap the inner bumper black like you said you might do? If so, do you have a link to a pic?

This really looks so cool guys. I’m used to the other that has space/gap for air venting/deflection which goes a bit lower , kinda diminishing the ground clearance but his feels like stock. It’s like this how how a MYP was meant to be. Nice job 👍

@MTXSE26

2 жыл бұрын

Thanks for watching !

How do you get it to attach is it adhesive? I'm looking to adding some visual mods on my model Y after I wrap it satin black

Looks amazing, so all the holes under the car line up and no new holes have to be drilled? Did you use the original plastic clips or did you buy longer ones? Thinking of putting one on my Model y performance when I receive in 2 to 4 months hopefully.

@MTXSE26

Жыл бұрын

I used longer push pins to hold it up.

@jimmyly6031

Жыл бұрын

Where and what size pins did you use? I'm going to pull the trigger on this.

I probably missed it but where do you buy the products?

love it!! but i can't find one on the website anymore tho or maybe it sold out

Looks nice. I have the carbon fiber kit from T Sportline. Is that from ikon Motorsports? Does your model Y have the new comfort suspension?

Ahhhhhh here we go! I commented before on your other video showing the spoiler about this carbon fiber lip because it looked so cool. I didn’t know you had this video actually showing the install of it. Absolutely love it. Its subtle and not too aggressive so to speak. Perfect fit, really sporty. Definitely gotta get this. Nice! 👍🏽

Silly question… but where do you put the tape?

Where did you purchase the lip from? Looks great

Love this lip, I have the same one, however one of my headlight LEDs died, but to replace it, they have to remove the front bumper. Any idea if the bumper can be removed without having to remove the lip altogether? Mine is attached the same way as yours with the stock screws and 3M tape.

@MTXSE26

Жыл бұрын

I’m not sure to be honest but I think you to since to take off the bumper you’ll need to take off the push pins on the bottom so that will remove the lip also

woww it looks nice

I think the vent extension is a bit much. Starts to look a little too modded. The lower lip tho is just right. I think I’ll get it when I get mine. Be nice to see the MYP with it on the road.

@MTXSE26

2 жыл бұрын

Yes the extensions on top of the lights will need more mods to fIt in properly with the look. I really like the current setup now .. thanks for watching 👍

Where did you get the lip?

How is the lip holding up?

Did you have any link for this product?

I'm so mad I missed out and can't get the one you have...The new ones look even more aggressive and come in 3pcs. But hey thank you for showing us the way a lip should look on the Y!

@MTXSE26

2 жыл бұрын

Ya I noticed they no longer sell it anymore. They actually had like 10-15 available then I posted this video and they sold out right away lol. I’m surprised they haven’t restocked on those. I got it for $360 and I noticed they also raised it to $455 when they noticed the demand

That’s a clean lip

Would you happen to have the description of this front lip? I went to Ikon motorsports and did not find this one piece in their catalog. Thank you in advance :) Awesome vid btw!

@MTXSE26

2 жыл бұрын

The lip is on the Ikon website when available however they have been sold out for awhile now. Just check once in awhile and they put it back up when it’s in stock. I saw it under the model y section. Carbon fiber lip

I love your new Carbon fiber Lip on your Model Y

@MTXSE26

2 жыл бұрын

Thanks 🙏 it came out great

do you have link on the front lip?

@str8304

2 жыл бұрын

ikonmotorsports.com/products/fits-17-21-tesla-3-sedan-4-door-v-abs-trunk-spoiler?_pos=3&_sid=40352cc2c&_ss=r

I have the same lip. It’s so clean, classy and understated.

@MTXSE26

2 жыл бұрын

Yes forreals. Very clean and install is solid

@stevemulisa

2 жыл бұрын

Can you please guide me where to find one. Ikon motor sport only have it for model 3. Is it there same fit or have they stopped making it for model y

@Dawsomesauce

2 жыл бұрын

@@stevemulisa In addition to his question what was the install like? Screws or tape ?

@MTXSE26

2 жыл бұрын

They’re by ikon motorsports but they’re sold out. Try emailing them to be put on a wait list if they have one

@MTXSE26

2 жыл бұрын

Just 3m and using the original factory holes with the push screw pins. You can use longer ones for more stability but no drilling on the car. But ikon is sold out currently I believe

Will this reduce the clearance and hit when getting into parking lots? How long will it last is my worry.

@MTXSE26

2 жыл бұрын

clears parking blocks with no issues.. Thanks for watching !

Just bought the same front lip for the model y, how’s it been since your last install?

@MTXSE26

Жыл бұрын

Still good. I did use some tapper screws on each side to provide a better support

Do they make this in the factory matte black finish so it matches the sides and rear diffuser

@MTXSE26

2 жыл бұрын

No they don’t sorry

So no nuts and bolts were used? Just the factory clips and 3m tape?

@MTXSE26

2 жыл бұрын

Yes correct

Awesome. Where is the best place to order? They sell it in matte?

@MTXSE26

2 жыл бұрын

I got it from Ikon motorsports

Where did you purchase ??

What is the link to buy this?

I could not find exactly version carbon front lip ( 1 whole pc) at Iron motorsports, could you advise what model number or details on the invoice from Ikon! Many thanks!

@MTXSE26

2 жыл бұрын

It was ikon but i think they’re sold out.

@marcoliu3961

2 жыл бұрын

@@MTXSE26 Many thanks for your reply! 🙏🙏🙏

Can you post a link to the lip

Hello sir. I'm trying to look for this 1 piece lip but what I'm seeing from ikon is only 3 pieces.

@MTXSE26

2 жыл бұрын

this one has been out of stock for awhile unfortunately

🔥🔥

@MTXSE26

2 жыл бұрын

Thanks Kameron ! 🤙🏻

I thought red is a cool color then saw several red module Y from 2021 & 2022. I immediately switched to deep blue metallic. Remember it’s plain red not metallic red. So shine goes down hill super quick unless you’re prepared to put 4k more on warp

I don’t see this item for model Y but I saw one for model 3. Do you think it fix for model Y too?

@MTXSE26

2 жыл бұрын

The one for the model 3 won’t fit. They should have one soon for the y .. the company was out of stock for a bit

@HieuNguyen-yf8vj

2 жыл бұрын

I see you just use the 3M tape, don’t need drill right?

do they have this lip for model Y? or model 3 and Y would be the same ?

@MTXSE26

2 жыл бұрын

They have same style for both cars

Hi mt26! I'm your subscriber and I'm enjoying your broadcast. I would like to know the brand and purchase destination of Tesla Model y Performance Carbon Frontlip. I'd appreciate it if you could let me know. I am a Tesla Modely Performance User in Korea.

@MTXSE26

2 жыл бұрын

The lip was from ikon motorsports

my fd try to go on highway around 120km,. and the lip fall down, then he have to drill the hole, does your good?

@MTXSE26

Жыл бұрын

I had to drill a couple tapper screws on the bottom for extra support

does this lip offer any performance or mileage gains?

@MTXSE26

2 жыл бұрын

No I doubt it. It’s for looks. Just like the stock MYP spoiler

They should make it to where the side is not as low so it doesnt lose too much clearance for when parking and so that it matches up with the stock side skirt panels.

@MTXSE26

2 жыл бұрын

Yes I get what your saying. There are a lot of people also that want a lower look on the front especially for a performance car. The manufacturers should make an option for the people that want more of stock look but I think the demand is just not there for them to make it.

@adeelio

2 жыл бұрын

@@MTXSE26 Yea if the manufacturer gave option that would be great because then customer's wouldn't have to try to buy matching side skirts to make it look even. I think it looks a little off with only front lip being low.

@MTXSE26

2 жыл бұрын

@@adeelio I get you. It’s actually more even now than before since it was raised before 🤙🏻

How much was it???

This looks like it gives better ground clearance than most lips for the Y.

@MTXSE26

Жыл бұрын

Yes it doesn’t affect the clearance much

What is the Prince for the frontlip and wher to buy it__

@MTXSE26

2 жыл бұрын

Thanks for watching ! The lip I got from IKON motorsports but I think they are sold out at the moment. It was around $450

Was it fitted over the OEM?

@MTXSE26

8 ай бұрын

Yes just goes on top of

What is the brand, how much and where to order? Thank you

@MTXSE26

Жыл бұрын

It’s from ikon Motorsports. It’s about $500

We’re did you buy this lip from , please send the link

@MTXSE26

Жыл бұрын

They’re from Ikon Motorsports

i don't see that one piece product on their website, just the 3 pieces

@MTXSE26

2 жыл бұрын

Hi they’re probably sold out already They sell out fast when they have it

Be careful with these spoilers. You must have air shocks or you are asking for big trouble. Hit a bump. Hit a berm, in heavy snow and you may be facing an expensive repair. and the jury is out on the effect it will have on your cars ride, feel, range, etc. I have a 2016 S and bought it when it was three years old. I knew nothing about Teslas at that time. Someone had turned off the warning chimes and the bottom of the facia hit one of those concrete parking berms. Yikes. Cost me 5.000 to repair it. After that I was very sensitive about that happening again. Found out I had no air shocks to, to raise the care pre emptively so I had to be real careful and guess what, the chimes were not 100 percent effective and I was lucky this didnt happen again. A front camera down below is a great idea and would recommend this strongly if you mount one of these spoilers.

Would it be possible to provide a link for the exact front lip you have? Thank you

@MTXSE26

Жыл бұрын

I don’t have a link but it’s from ikon Motorsports

@SEXYPINOY22

Жыл бұрын

Did you get it from eBay or Amazon? I’m only seeing the 3 piece and I’m not a fan of the 3 piece . Thank you so much

@MTXSE26

Жыл бұрын

They might have been sold out but it was on the ikon website and eBay as well

Hi! What company makes the lip

@MTXSE26

Жыл бұрын

Ikon Motorsports

Can you send me the link where you buy thanks

@MTXSE26

2 жыл бұрын

It’s from ikon motorsports

Would you provide a link to the lip ?

@MTXSE26

Жыл бұрын

I don’t have a link but it’s from ikon Motorsports

Where did you buy it?

@MTXSE26

6 ай бұрын

It’s from ikon Motorsports

Where did you buy this lip

@MTXSE26

2 жыл бұрын

Ikon Motorsports

Hi , do you have link for front lip?

@MTXSE26

Жыл бұрын

It’s from Ikon Motorsports . They should have it on their website. Just look up Ikon

@chairay7934

Жыл бұрын

Thx for your help

link for the CF?.

@MTXSE26

Жыл бұрын

I don’t have a link but it’s from ikon Motorsports

any drilling needed?

@MTXSE26

2 жыл бұрын

No drilling in the car but it will require drilling on the actual lip to make it fit the factory holes

@GarRnZeM

6 ай бұрын

@@MTXSE26where are you making the holes bigger and what size bit?

Can you link the item you bought?

@MTXSE26

2 жыл бұрын

it's from Ikon motorsports but they're currently out of stock.. Thanks for watching !

Where's you get I can't find anywhere

@MTXSE26

2 жыл бұрын

This was from ikon motorsports..

What's the link to this lip?

@MTXSE26

Жыл бұрын

I can’t find the link anymore but it was on eBay and Amazon before. Seller was ikon Motorsports. They also have a website you can check. When it was available it was about $380-$560 price always changed

Whats the link to lip

@MTXSE26

2 жыл бұрын

They’re no longer being sold but they’re from ikon

where can I buy this?

@MTXSE26

16 күн бұрын

This was from ikon Motorsports

@magicman421

16 күн бұрын

@@MTXSE26 Thank you. Long term update? Is it available in Matte Carbon?

@MTXSE26

16 күн бұрын

@magicman421 still running strong and no issues 👍👍 I only saw gloss carbon for this style.

@magicman421

15 күн бұрын

@@MTXSE26 I wonder if I could cover that with matte ppf 🤔

WHO"S SELLING THIS ?

very nice!👍 how easy to install?does it comes with bolts/nuts and double adhesive tape?

@MTXSE26

2 жыл бұрын

I used stronger Vhb 3m tape and used my own hardware as well. The ones that came with it weren’t ideal for the install I did

@gbk-947

2 жыл бұрын

@@MTXSE26 what type of hardware did you used?

@gbk-947

2 жыл бұрын

did you used existing tabs/clips?

@gbk-947

2 жыл бұрын

THANKS for this YT POST of yours.. i was able to order and received the same kind of front lip from ikon motorsport..it didnt have an intallation instruction and it came with a long screws and tape.. i know you didnt use the long screws that came with it. can you please share the hardwares that you used. TIA

@MTXSE26

2 жыл бұрын

@@gbk-947 we used longer push pins to replace the factory ones. Take off one of the factory ones and get a longer one similar to that and you can use those to secure the lip