I'm an independent contractor and I enjoy using your doors to install on shipping containers very reliable and good product

wish my old door here had one of those tensioners on the end. man, this things making wish I had a barn door instead. installing them brand new does look easy. way easier than what I am doing here with this 20+ year old door that messed up and needed repair it's all hardware that messed up. These doors require some " SOME" maintenance. Mine was here when I bought the house. The screws will back out eventually - my door is nearly identical to this one in the video but has no tensioner. The plastic guide parts on the sides of the door ( Not the tracks on my shed) are all Stapled into the door - cracked, broken, some pieces missing. The center DRUM that is in this video that the door is wrapped around when open is NOT on my door, instead there are just two metal stamped wheels that the axle goes through. they look like Cake Pans the edges are sharp and the inside edge on either one of them can slice your finger rtfo. LOL no joke. with no instructions and by myself, I have managed to take this down, revamp things to work, and then reinstall it. How? I have never seen one in person brand new so I came here and to other videos to see what they look like uninstalled. I slowly realized fixing my door was not going to be easy. The easiest safest way is to take the thing down to the point that the door is under no tension, completely down and the spring is unbolted If I cared about teh looks more I could have repainted and completely refurbished but I dont.

I want to install one on the interior of a closet to replace typical 7h x 8w sliding closet doors... can the side rails be installed and then the roller installed after from the inside? Every install video I see there is ample room for the installation, wondering how this would go in a bedroom closet, seems possible but who knows?

Very Nice!

How do you’ re roll the Curtin if it unwound do to mistake ?

Is this setup still working 2 years later?

That almost looked like the world famous Todd Nelson.

This is shown mounted on the hall side and not inside the unit.

At 2:32, you put the "Warning" yellow label over the top of the image of what should be done. It completely obliterates the intent of this close up and negates the whole attempt at showing and indicating a potentially dangerous installation mis-step. Please move the overlay so that at least we can see what you are trying to show.

Am I understanding this properly...that the latch is on the outside of the door? How in the world are you supposed to lock it? Padlock only?

@Fe4Christ

4 жыл бұрын

They have options for an indoor lock when you buy it. We have indoor locks on our garage since we have a side door entrance but we use the outdoor lock on our shed and have to use a padlock.

@MeltingRubberZ28

4 жыл бұрын

@@Fe4Christ thank you. I'm putting a side door on my shed so I'd much prefer an internal lock.

What is the correct height of the header?

👍

For a 6x7 roll up, should your framing be 6x7?

@dcsr1986

2 жыл бұрын

Did you ever figure this out? I have a 3’x7’ and trying to figure out if my rough opening should be 3’x7’

what garage door openers can be used with this door?

@danedell4955

4 жыл бұрын

Try liftmaster

@danedell4955

4 жыл бұрын

If commercial exterior use micanon pro h series.

how about showing a video of mounting a motor door opener.

@danedell4955

4 жыл бұрын

Need door spocket and chain to install motor operator.

@JM-yx1lm

4 жыл бұрын

650 series doesnt have that option.

buenas tardes; estoy montando una puerta de garaje enrrollable y me emite un ruido a la altura de 1m y no continua subiendo, me pudiese ayudar con algun comentario.

@EvanSnowSr

4 жыл бұрын

Debes ajustar la tensión como en 6:48 punto en el video.

Ósea que no se instala adentro de la unidad.

What's price of door ?

@jasperjordan6972

2 жыл бұрын

I think about 700 but I'm not sure

Can exterior weatherstripping be added to keep snow, bugs, dust, etc. out?

@QQTrick1QQ

4 жыл бұрын

Don't answer any questions, not good for customer relations, makes me think customer service is no better. 👎

@EvanSnowSr

4 жыл бұрын

When you order the door on their website you'll have the option of adding insulation, a top draft seal and/or a side brush seal. The cost is $127.50 for the top and side seals.

@captanehook6927

4 жыл бұрын

odd. I did not watch this video but I got a notification answering a question I did not ask.

@EvanSnowSr

4 жыл бұрын

@@captanehook6927 Are you sure? It looks like you asked the question about a year ago.

Es mas seguro poniendo los stoper antes de bajar la puerta para evitar que la puerta se devuelva y asi se agilisa la bajada de las puertas ya que se hacen en serie, toca bajar 300 puertas en un dia

What if I don't have seven feet?

H