Roland GR55 and Behringer FCB1010 midi connection
Музыка
In this video we can see how to connect Roland GR55 with Behringer FCB1010 midi foot pedal. Also the assigning of two foot pedals.
The Midi value of first foot pedal is 27 and the other is 7.
So check this video for how to assign effects in these pedals with GR55.
If you are using a new Behringer foot pedal, sometimes you may need to do calibration for FCB1010.
Check the below link for how to do calibration for FCB1010
• Behringer FCB1010 Cali...
Please subscribe this channel for more videos.
Thank you.
Subscribe this channel for more videos. Also please see the PLAYLIST.
My social profiles
FACEBOOK
/ subs.subin
INSTAGRAM
/ subs.subin
Twitter
/ subinsuniverse
Blogger
subinsuniverse.blogspot.com/
Пікірлер: 35
Eye opened.🙄...👍👍👍👍👍👍👍👍👍👍👍👍👍
Awesome video. Am so happy. works fantastico :) Good job
@Subinpv
11 ай бұрын
Thank you ❤️
You can also make the pedal just select the presets you use.
how to settings is the fcb 1010?
Heloo.. I configured FCB 1010 as per the video,,, buthe problem is that switch number 1 is directly going to bank 27 and switch 3 is going to bank 2 directly,,,, can you please help me how to assign the Tone Bank on series...
Hi its a great video...and wat about midi to usb cable...how much is tat and it works good?
Hi subin thanks for your video can you help me with something i have GR55 and same middi foot controller i follow all the steps for expression pedals volume and wah .wo when i set volume pedal its done as you explain but only on and off volume level is not going down and up also i did same thing with wah as seen you video wah deosn't work at all so if you help me i will be really apriciate thanks
Just wondering if this will work on Boss GP10? I haven’t seen a demo video yet here on youtube.
@Subinpv
5 жыл бұрын
It won't work in GP10. But u can use Android devices to change patches easily. There is another video in my channel. Please check that also.
Is it possible to assign a specific patch lets say 29:2 to a footswitch on the fcb1010? Lets say i want to press switch 7 of the fcb1010 in order to recall patch 29-2
@MartinCraneRockbeast
Жыл бұрын
Yes
how is the fcb1010 light is blinking? what is the procedure of fcb 1010 set tings?
@Subinpv
6 жыл бұрын
Don’t bother blik light. In some pedals light may blink. Some don’t. Just make the connection first & check the patches changing or not.
Subin sir can gr 55 tones be played by any midi keyboard...if yes, plz tell how?
@MartinCraneRockbeast
Жыл бұрын
According to the implementation chart no.
I don't understand how to set gr55 with fcb1010. please help me.
@Subinpv
6 жыл бұрын
Hello, Please follow the video step by step. I have demonstrated full setup in this video.
@MartinCraneRockbeast
Жыл бұрын
@@Subinpv Read implementation charts on any device.
I configured my Gr 55 like yours, but don't know the configuration of fcb 1010. Could you please write how to set fcb? Best regards 😊😀
@Subinpv
5 жыл бұрын
There is another video in my channel about How to calibrate FCB 1010.
Subin - Can I used FC200 for GR33?
@Subinpv
3 жыл бұрын
Yes. Its midi pedal no. So most probably it should work.
@shamneo8353
3 жыл бұрын
@@Subinpv - Thanks for the info. I buy the FC200 and give it a try..Hopes it goes well.
👍🏼🙏🏼
@Subinpv
2 жыл бұрын
💜
How did you know that the EXP pedal 1 of the FCB1010 was CC27?
@julp8728
4 жыл бұрын
What is the CC number of the second expression pedal? What are the CC number for each fcb1010 footswitch? Thanks
@MartinCraneRockbeast
Жыл бұрын
@@julp8728 It can work any CC you require.
Can you use the GR55 to control other pedals?
@Subinpv
2 жыл бұрын
Yes its possible. I tried it with GR-20.
@mastermizbot
2 жыл бұрын
@@Subinpv cool thanks for the reply! If you ever decided to do a tutorial I would be thrilled
Excelent! Thanks for the video you dissipate some questions I had. Now you can use 3 pedals of expression? And what happens to the pedals of Gr 55 this lost functions? Saludos desde México!!!
@Subinpv
6 жыл бұрын
Fernando Obregón No change will happen to GR55. Through this midi assignments, only the midi controllers will reflected. Because CC value is controlling midi devices.
@fernandoobregon4243
6 жыл бұрын
Subin pv. ok I appreciate your time to answer, Maybe one day some music collaboration ;)