Roland CY-8 Dual Zone Crash Review
Музыка
New album "Can You Draw Me?" comes out 12/4/20, pre-save it here distrokid.com/hyperfollow/dem.... Get 7% off digital distribution on DistroKid distrokid.com/vip/demonicswea.... Pick up a new Roland CY-8 on Amazon at amzn.to/36O3LRs, or find one used on Reverb at reverb.grsm.io/used-cy-8. Get the CYM-10 (spin stopper) at amzn.to/3kGnEiu. The CY-8 is a great inexpensive dual zone crash cymbal. No, it will not work on an Alesis Nitro, sorry. If you want a great inexpensive expansion crash for your Nitro, try this one amzn.to/32UAinY. Follow Demonic Sweaters on Spotify open.spotify.com/artist/6FNgc... or on Apple Music / demonic-sweaters
Follow Manasota (my other chill project) on Spotify open.spotify.com/artist/6mAvY...
Follow hums on Spotify (me and Chiaki Yamamoto) open.spotify.com/artist/1bwzd...
Demonic Sweaters Recommends Playlist open.spotify.com/playlist/03e...
Support my music by downloading from:
anthillrecordings.bandcamp.com
Buy and sell the best used gear at reverb.grsm.io/demonicsweaters
Get 7% off digital distribution on DistroKid distrokid.com/vip/demonicswea...
Distribute your music FOR FREE at www.routenote.com/referral/2f...
#rolanddrums #cy-8 #experimentalmusic #drummer #demonicsweaters #manasota
timestamps:
0:00 Intro
0:06 description and features
1:47 no, this won't work on an Alesis Nitro
4:20 playing demo
7:02 Final Thoughts
Пікірлер: 76
Nice! I like it!
Any ideas on how to repair these if it auto chokes
Hola, es compatible con Alesis Strike Pro?
Sorry what module is that again... blown away with the GREAT SOUND !! thanks!!
@demonicsweaters
2 ай бұрын
Here I am using a TD-8
Can you recommend a budget dual zone cymbal for the nitro mesh need to have a decent ride with bell PLEASE !!!! I HAVE MAD RESPECT FOR YOUR CONTENT AND YOU HAVE BEEN KEY FOR ALL MY PURCHASES !
@demonicsweaters
2 жыл бұрын
Thank you, but no I can't The Nitro only supports single zone cymbals.
I'm using it as a crash and a ride on a TD5 and I'm very happy. But one should note that I'm a keyboarder, not a drummer ;)
Hi Justin, sorry for the late question. This cymbal (CY-8) work one zone and choke in alesis nitro or surge mesh kit? I understood that only the surface trigger worked, but I'm not sure if the choke works. Regards
@demonicsweaters
2 жыл бұрын
I think? But not totally sure
The Crash 2 input on my Alesis Nitro module does support choke (all 3 cymbal inputs do). I have tested them all with the original crash and an Xdrum cymbal pad with choke from the DD-530 add-on set.
@demonicsweaters
3 жыл бұрын
Oh good to know
@trevarcher
3 жыл бұрын
@@demonicsweaters Hi Justin. Love your channel. The videos are very helpful and informative for a newby in E-drums like me. You have solved a mystery for me, since I have been arguing with a major online seller who believed/claimed that the Xdrum DD-530 add-on 12" cymbal pad should work even with 3 playing zones with Nitro (and with the Xdrum DD-530 module which appears to be identical to the Nitro, and for which it is specifically being offered as an add-on). I got the cymbal and found it would only work as one zone but at least with choke, even if plugged into the tom 4 input (in that case without choke). Since the whole add-on set, including dual 10" drum-pad and mounts for both, was still a reasonable price (under €140 with an ebay discount code), I have hung onto it, as at least now I get all the functions out of it that my Nitro module will support.
@demonicsweaters
3 жыл бұрын
That is a good deal for all of that either way! Then I the future you may get a different module and be able to use all the zones
@TracyGunz
2 жыл бұрын
Roland Is KING ~ I started my electric drum life on Alesis, got a good deal on one and bought it. It was great until I played a Roland Kit at Guitar Center, I was hooked from get go. I could have stayed at GC and played that kit until they closed lol, I wanted too. I went w/o for a few mnths, saved up money and went back and bought that kit. Alesis been getting dusty every since lol.
Are there any dual zone cymbals that work with a nitro mesh kit???
@demonicsweaters
3 жыл бұрын
nope, the module only has single zone cymbal inputs
Hi there. I have a td9 module, but using mostly Alesis nitro pads with it. Recently I bought a CY12 to use as a ride. And it sounds different to me than when I was using the Alesis Cymbal. Because it is a 3 zone cymbal it is hard to be sure, but... Would you say that a Roland pad/cymbal will have a better sound than an Alesis one? I mean, they should trigger the same sound... I'm asking this because I feel that the hi-hat sound could be improved. And maybe buying an CY5 or a CY8 to replace my Alesis hi-hat would make a difference. Thanks
@demonicsweaters
2 жыл бұрын
Maybe it’s because you’re hearing the other zone
@edgarsousa6630
2 жыл бұрын
@@demonicsweaters Apart from the size, is there any difference between the CY-5 and the CY-8?
When using on a alesis nitro is there anyway of changing the zone being used from the centre to the edge?
@demonicsweaters
Жыл бұрын
not that I know of
Hello, do you recomiend for a Nux dm7x ? I would like to use it as a ride or as a china
@demonicsweaters
Жыл бұрын
I haven’t ever tried one of those, but I have seen good things and from what I understand they are compatible with Roland gear
Do you know if the CY5 will work with the nitro kit?
@demonicsweaters
2 жыл бұрын
yes, but only single zone
Do they work on the Roland Td-50 module? And Can you also change the cymbal to a splash?
@demonicsweaters
3 жыл бұрын
Yes and yes!
@zachtavares4983
3 жыл бұрын
@@demonicsweaters How do I change it?
It'll works for the YAMAHA DTX502 module?
@demonicsweaters
3 жыл бұрын
I don't know for sure, but probably not. I know Yamaha's stuff generally isn't compatible with other manufacturers. Check with Yamaha to know for sure.
Hey dude do you think you could help me? I'm struggling to get an actual full cymbal sound out of this cymbal I just bought 2 of them for a really good deal and I can only get like a single tone of tbe cymbal hit not a full wash if that make sense. Was it just plug and play for you or did you have some tweaking to do? I own the td27 and I want the same sound out of my two cy 8s as the sound you are getting but each tone is just flat tin haha I hope this makes sense
@demonicsweaters
3 жыл бұрын
make sure you have the correct trigger type selected in the trigger settings.
@grxygxds
3 жыл бұрын
@@demonicsweaters thanks so much mlfpr such a quick response 😀 keep up the great work I will try this as soon as I get home. Thank you!
@demonicsweaters
3 жыл бұрын
@@grxygxds glad to help :)
Do you know if the Roland Anti-Spin thing will work with the hi hat? I have a vh11 that constantly spins and it drives me nuts.
@vampirelogic
3 жыл бұрын
btw I bought this cymbal a few months ago because it was way too reasonable of a price for Roland. You are right, the swells are really good
@demonicsweaters
3 жыл бұрын
If you look under the hi hat and it has the inverted V shaped slot, then yes.
@leiahedberg8112
3 жыл бұрын
The spinning vh cymbals arent actually the fault of the hihat, its the hihat stand. The rod it sits on is probably slightly unscrewed so just take a pair of pliers or something and relock it.
@vampirelogic
3 жыл бұрын
@@leiahedberg8112 I did try that and thought it would fix it but for mine it didn't work. I did come up with a solution though. Duct tape!! I went from the pole to the bottom of the HH and it hasn't spun since!
What type of pad/symbal did you use on TD8? There is no PD/CY8 availability. Thanks in advance for your help
@demonicsweaters
Жыл бұрын
I actually can't remember, but just try the different ones until you find one where both zones work, then adjust the parameters until it works the best.
@JoseGabriel-dd2up
Жыл бұрын
@@demonicsweaters I did that. I got them to work almost perfectly, I noticed that if I am playing a song and I have to use my symbals in a bridge continuously, 5 hits might work perfectly, but the 6th will be a missed trigger and I also find myself hitting them harder than a regular single zone symbal to get some sound out of them. I have messed around with the settings, but I can't get them to work perfectly. Is that why you don't have the CY8 as your regular one?
Does this work in td 1dmk???
@demonicsweaters
3 жыл бұрын
Yes, the TD 1dmk comes with CY-5 cymbals that are pretty much the same thing, just smaller.
Hi, can somebody please help me? The edge of my cymbal doesn’t work properly, when I use it as a Ride (or even as a Crash) it sounds as if I’m playing the top of it. Please help.
@demonicsweaters
3 жыл бұрын
What kind of module are you using?
@josealcaino5689
3 жыл бұрын
@@demonicsweaters Roland TD17
@demonicsweaters
3 жыл бұрын
@@josealcaino5689 do you have CY-8 selected as trigger type?
@josealcaino5689
3 жыл бұрын
@@demonicsweaters sorry, what does that mean?
@josealcaino5689
3 жыл бұрын
@@demonicsweaters i has no edge trigger and I can´t choke it
is that compatible to alesis?
@demonicsweaters
3 жыл бұрын
If you're talking about a Nitro or Surge, yes, but only one zone will work.
Hi hat sound fantastic.. what is the model?
@demonicsweaters
2 жыл бұрын
In this video it is a VH-11 with a TD-8 module
If you connect the cymbal to the tom 4 plug of the nitro, doesn't it take the double zone?
@demonicsweaters
3 жыл бұрын
No, it won't. The dual zone tom inputs are piezo/piezo triggers. Roland dual zone cymbals are piezo/switch type triggers. It may work sorta, but won't be very responsive on the edge zone.
@seb10102
3 жыл бұрын
@@demonicsweaters Sorry for the inconvenience, I'm about to buy the Nitro, can I put a double zone cymbal from alesis or does the module only accept single zone? thanks
@demonicsweaters
3 жыл бұрын
@@seb10102 The cymbal inputs are all only single zone.
@seb10102
3 жыл бұрын
@@demonicsweaters Such bad news, now I rethink the purchase. Thank
@demonicsweaters
3 жыл бұрын
@@seb10102 You're welcome. The Nitro cymbals will choke however, but just only one zone for hitting.
Can i use it with a modular synth?
@demonicsweaters
Жыл бұрын
I have no idea how you would do that
@davidjeger115
Жыл бұрын
@@demonicsweaters like a simple trigger. So if I connect this cymbal to a simple drum machine or a modular synth, will the cy8 work with them? Is it usable like a trigger? I would like to use an acoustic kit, but I would like to use synths to manage noise sounds when I am drumming.
Is this compatible in roland td1dmk??
@demonicsweaters
2 жыл бұрын
Yep
@noahmundinservanez7134
2 жыл бұрын
@@demonicsweaters thanks dude 🤘🤘🤘
Im using as a fixed hi hat on my td10. Works great! Might get a Goedrum controller and try it as a moving hi hat.
@demonicsweaters
3 жыл бұрын
I don't think this would work good in that situation, because of the shape under the cymbal it requires a spin stopper. I don't think you could fit a hi hat clutch on it.
And will it work on Alesis Forge ? :D
@demonicsweaters
3 жыл бұрын
Actually I'm not sure, is the forge dual zone cymbals?
@kevincernoch58
3 жыл бұрын
@@demonicsweaters Probably nope. It's difficult say no because Forge has same model like Crimson and crimson has 2 zone cymbal.
Does he say "And it is also chocobo" 1:14 or i should left Final Fantasy for awhile
Does this work with the TD-4 module?
@demonicsweaters
2 жыл бұрын
It should