This video will guide you through Charger 3 RC2 service for single crown RockShox suspension forks.
00:00 Intro
00:35 Controls Removal
01:05 Damper Removal
01:50 Buttercups Removal
03:03 Damper Service
06:47 Damper Assembly
12:00 Buttercups Installation
14:16 Damper Bleed
17:05 Test Compression
18:43 Damper Installation
Charger 3 RC2 to 3.1 Upgrade Service - • RockShox Charger 3 RC2...
Lower Leg Service Video: • Rockshox 50 Hour Lower...
Air Spring Service Video: • RockShox DebonAir+ 200...
Air Spring Travel Change Video: • RockShox Air Spring Tr...
Service Manual: www.sram.com/globalassets/doc...
Suspension Specifications Document:
www.sram.com/globalassets/doc...
Tools and Supplies:
Reverb Vise Blocks
Hex wrenches - 1.5, 2.5, 3, 5 mm
Hex Bit Sockets - 1.5, 2.5, 3, 5 mm
Adjustable or 23 mm end wrench
Adjustable or 25 mm end wrench
Adjustable or 28 mm end wrench
Crowfoot socket 23mm
Crowfoot socket 25mm
Crowfoot socket 28mm
Torx Wrenches - T25
Torx Bit Sockets - T25
Cassette lockring tool or RockShox Top Cap/Cassette Tool (3/8" / 24 mm)
Torque Wrench
Internal retaining ring pliers- large
Pick (non-metalic)
SRAM Butter Grease
RockShox Suspension Cleaner
Threadlocker Loctite 2760 - Red
Threadlocker Loctite 242 (blue)
Maxima PLUSH 7wt Suspension Fluid
For additional information visit RockShox.com/service.