This is a great video, thanks WLL. It's really great to get the visuals of what's happening inside the machine and to see what does what. This is the first time I have heard there is a water level marked on the water tank of the Appartamento. I checked my owner's manual, and it didn't mention it there. I've been filling it as close to the top as I can for more than a year now.

@Wholelattelovepage

2 жыл бұрын

Hey Mike, Thanks for the comment and you're welcome for the video! So long as you're not overflowing the reservoir you're fine. Marc

This guy is truly outstanding - A class !

@Wholelattelovepage

2 жыл бұрын

Hey Paul, thanks for the comment!

@runcmcrun

Жыл бұрын

I agree, coffee lovers appreciate your dedication and good work always. Muchas gracias!

@runcmcrun

Жыл бұрын

… by the way, the led zep reference it’s awesome!

11:00 Yes! This tip just saved my morning coffee tomorrow. Thank you!

@Wholelattelovepage

Жыл бұрын

You’re welcome!

Sweet little machine... pressure stat is rather unusual. Thanks for the tour!!! Drool drool... ☕️👌😎👍

@Wholelattelovepage

2 жыл бұрын

Thanks for watching!

Obrigado pelos vídeos incríveis que têm feito.

Thanks guys for the informative video. I appreciate to see another video for housing removal and thermostat pressure adjustment for powerful steaming performance on the Rocket Apartmento

@Wholelattelovepage

2 жыл бұрын

Hey MA, You are welcome. Stay tuned - more Appartamento videos to come including housing removal/install. While you can adjust the P stat to increase boiler pressure/temperature keep in mind that increases your brew temperature as well. Can deal with that by using a longer cooling flush before an extraction.

Gracias, saludos From Perú

Fantastic work!

Marc: love this internal tear-down! Thank you. (Let’s get some Bezzeras on here ;) It’s very detailed for us techies that are interested in this, beyond the usual demonstration reviews that WLL does. I like it all, but this was impressive. Cheers pal!

@Wholelattelovepage

2 жыл бұрын

Hi C G, Thanks for the comment. So many machines and so little time. But, fear not we are working our way through videos like this on other machines including Bezzaras. That and a whole latte more DIY maint/repair content. Much of it available now or coming soon to our support center here: support.wholelattelove.com/hc/en-us Marc

Badass video. More content like this!

@Wholelattelovepage

2 жыл бұрын

Hi YB, We have a bunch more like this and creating more all the time filling out our support site for prosumer level espresso machines: support.wholelattelove.com/hc/en-us Marc

Thanks for showing the Rockets now 👋

@Wholelattelovepage

2 жыл бұрын

Hey b, You are welcome! More technical videos on a variety of Rocket Espresso machines to come. Marc

Fantastic video. It’s so interesting so see you walk through these. I don’t understand some of the terminology, like what a pressure stat is, but it’s very informative!

@Wholelattelovepage

2 жыл бұрын

Hey Marshall, Thanks for the comment. A pressurestat measures the pressure in the boiler to control temperature in the boiler. When the pressure drops the boiler heating element is energized. When pressure rises enough the power is cut to the heating element. Marc

Thank you for this! After watching it, we were able to fix our coffee machine ourselves!!

@Wholelattelovepage

3 ай бұрын

Awesome - thanks for the comment!

Thanks! By far the best video tour of the inside of the Appartamento I have seen. I've had my Appartamento for about 3 years now and love it. I have had to replace the vacuum relief valve. Have a new issue that just popped up. The machine seems to be overheating and have water coming out of that little "button" under the group head. The safety valve is being tripped due to overheating. I contacted Rocket so we'll see what they say, hopefully it's an easy fix!

@Wholelattelovepage

2 жыл бұрын

Hey austin, Thank you a whole latte for the comment! Hopefully Rocket can help you out. Overheating sounds like pressurestat or relay.

@IbHustln

2 жыл бұрын

@@Wholelattelovepage Have a new Pstat on the way from Rocket. Do you guys at WLL happen to know how easily a new one can be installed? Obviously there are the two wire connections on top, but does the bottom silver metal base of the Pstat need to be unscrewed from the tube below as well? Or can the plastic part be pulled out and just slip a new one into the silver metal base? Thanks!

@IbHustln

2 жыл бұрын

UPDATE - For anyone having the same issue with their Appartamento. Ordered a new P-stat from Rocket USA. It does not look like the one in this video and is the same as the original P-stat in my machine (Round in shape, brand name MA-TER). Unfortunately a new P-stat did not fix the over-pressure issue in my Appartamento. Just FYI for anyone replacing the P-stat at home themselves you have to take the entire casing off of the machine. The P-stat sits on top of a rounded pipe below and a bolt threads into it below securing it to the pipe. So basically you have to turn the bolt below the P-stat counter to get it off.

@nolanreed7090

2 жыл бұрын

@@IbHustln Have you been able to fix the issue? My machine is starting to over-pressure and releasing steam above the drip tray on a fairly regular basis. I'm hoping I can fix it at home and not have to box it up and ship it across the country for a warranty repair.

Fantastic video

@Wholelattelovepage

2 жыл бұрын

Thanks! 😃

Nice. One for my own machine.

thanks for this great information

@Wholelattelovepage

2 жыл бұрын

My pleasure

Excellent job sir

@Wholelattelovepage

2 жыл бұрын

I've never used that model but it should work on any single boiler machine were you can divert some water from the brew group to the steam wand while brewing. AJ

Thank you. More videos on the rocket Apartamento please thank you.

@Wholelattelovepage

6 ай бұрын

Hi ff, Here's video posted yesterday with a deep dive on the new Appartamento TCA: kzread.info/dash/bejne/lqmH1rqKYsTVe7A.htmlsi=RmsKft9OYPGv8MEa And here's Unboxing, Setup and First Use of the new TCA: kzread.info/dash/bejne/ompnxJp6p8aon84.html

Solid Machine! Mine kicks ...! I think I might have an addiction now .

@Wholelattelovepage

2 жыл бұрын

Hey Mark thanks for the comment - caffeine is the number one consumed drug! Marc

Awesome detailed walk-through! I run my Appartamento in a little cafe in the Philippines and it keeps up all day long! The only downside is that it cannot be plumbed! I have been thinking of a way I can setup a 5 Gal Jug underneath the counter and pump water in the machine whenever the machines empty water sensor goes off. Some sort of relay that goes into a timer that will pump water into the reservoir for 'X' amount of secs till the reservoir is full, then it stops. So I don't have to refill it every 15 mins. 🙂

Great!

@Wholelattelovepage

2 жыл бұрын

Thanks RK!

I love these in depth machine videos from you guys! Is there a chance you would ever go through a slightly “simpler” machine like the Bezzera Unica?

@Wholelattelovepage

2 жыл бұрын

Hi KP, Glad to hear you're loving these types of videos - thanks for the comment! I don't have a full internal tour of the Bezzera Unica but I do have this overview video of the machine which includes a quick look at internals and more details: kzread.info/dash/bejne/laqrqKqQgLWzeJc.html

I've had my Appartamento since 2017 which I got from you guys and It's been running like a champ since! Only one small repair under warranty which got the part out to me super quick and with Customer Support was able to diagnose the issue and get me back to brewing in a few days. Other than that, I keep the machine clean and she runs like a champ and my wife and I use it pretty much every day sometimes twice a day since we bought it. I too have recently saw some videos about the brew pressure and brew water temp and am going to try this for myself as mentioned below. I've had no issues with whatever my machine BAR is set to however after diving deeper into the topic I could say that the machine pumps water maybe slightly on the high end and am wondering if lowering the pressure to 9-10 will yield in a better extraction by allowing the coffee more time for full extraction potential. I typically run the same coffee day in and day out with the occasional fancy brew. I have a triple basket and am usually always running 20g and while shooting for 40g yield am usually way short of that 25-30 second from 1st drip. If I go to 30 seconds I'm usually at 60g. The 60g usually does task good and produces good crema I'm just wondering if I can make the flavor or extraction better by adjusting anything or if I'm almost spot on. The coffee is in no way "watery" but initial extraction does come out I would say on the faster side and that slow drip you see with naked basket is just not there. I ordered a temp gauge too for the Group Head to really dial in brew temp after playing with the pressure I'll see what happens. I also grind on a Silencio and am usually at 1.5 grind setting almost the lowest it will go. Lastly I've ordered an IMS screen to see if that improves water distribution on the puck. All in all I still LOVE this machine.

@jdpst20

2 жыл бұрын

well... I dialed the Silencio Grinder to basically 1 with 0 being bur on bur and I've yielded a nice shot of 20g in 42g out in about 28 seconds. The flow rate is MUCH slower out of the extraction and the flavor of the shot is totally different. Ended up with about 45ml of espresso with a nice layer of Crema. I did a 5 second pre infusion too. I'm anxious to see what difference if any it will make when I can monitor the brew pressure and see if adjusting it to say 9-10 Bar if it's currently set to 12-13 will make a difference. Then I once BAR is set I'll install the temp gauge and see about the difference it makes once the brew temp is fully up to temp and I'm not just guess. Finally I'm really interested in possibly trying the Flow Control Valve for the Rocket Appartamentto and messing around with those settings.

@Wholelattelovepage

2 жыл бұрын

Hi Joshua, Thanks for the long-term owner report! Glad our CS staff got you squared away quickly. As a pressurestat controlled machine for temperature cooling flushes are the way to work the temp - guessing you knew that. I would not worry too much about extraction timing so long as flavor is good. As for brew pressure, manufacturers like Rocket, Bezzera and others set the OPV to a slightly higher pressure on their vibration pump machines as compared to their rotary pump commercial machines. Typical rotary pump puts out 10-11g/s while the vibration pump in your machine and others does 7-8g/s. It's unlikely you're hitting the OPV set pressure when brewing as some pressure is dumped through the coffee and the OPV is much further back in the brew water hydraulics. While pressure and flow are not the same they are related. Manufacturers set higher OPV on vibration pump machines to keep the flow rate closer to rotary pump machines.

@jdpst20

2 жыл бұрын

@@Wholelattelovepage Thanks for the reply... Yes usually I will wait about 20-25 min before using machine for it to heat up... do a 5 second flush before pulling shot. IF the machine sits on for a longer period of time Ill flush until I don't see water with steam about 10-15 seconds. Usually if I'm making milk drinks I'll grind a bit Corser and have a 1:3 or even 1:4 ratio get good crema still and the flavor is still good to me mixed with milk... I was messing with a 1:2 ratio this morning with a much FINER grind and I could def tell a difference in flavor. If it wasn't ground fine enough and I had say a 1:2 ratio 20g to 40g in 50ish ML in say 10 seconds the coffee was bitter and sort of one dimensional. Grinding finer to get a longer extraction really changed the taste I think. Instead of just adjusting brew pressure at the OPV would you suggest investing in a Flow Control Valve to experiment with restricting flow? I did see your videos on brew pressure and how it can effect taste ect.

@tommer5008

2 жыл бұрын

Unfortunately, i purchased mine there in 2018 and only 8 months out of warranty it now goes overpressure in the boiler. I now live near the Cape in Mass and no one repairs over here. I tried adjusting the pressure stat, but that only worked for awhile. Replaced the pressure stat with same result. i have to use the steam wand to release pressure so i can brew with out the machine whistling and releasing pressure. Help!

@jdpst20

2 жыл бұрын

@@tommer5008 if you call up Seattle coffee gear or rocket USA they are pretty helpful. I had to replace one part and although daunting at first they walked my wife though the whole thing while I was out of town and she got it back up and running really easy.

Interesting! Mine looks a little bit different though. I still have an older model. The pressostat looks different and has a a slotted head-screw on it and also it doesn’t yet have the eco mode. It’s great to see and to understand better how the machine works, but to be honest the only things I would do as an mechanically unskilled user is to change the brew pressure via the opv valve if I had a grouphead manometer, adjust the boiler pressure via the pressostat if I had a grouphead thermometer or, and that‘s the only thing I have done so far as I don‘t own the appliances above yet, descale the water sensor when the machine won’t fill even though there‘s water in the tank.

@Wholelattelovepage

2 жыл бұрын

Hi Tim, Thanks for the comment! Yes, it's changed a bit over the years.

Great video as always. Would be great to do a video on separate components and what to look for if they are faulty. The expansion valve is confusing to me still. Just an idea :)

@Wholelattelovepage

2 жыл бұрын

Hi Thomas, Thanks for the comment and content request. We're adding more all the time. Check back to our support page for more content specific to the Appartamento. New content due there in the coming weeks: support.wholelattelove.com/hc/en-us/sections/1500000401242-Rocket-Espresso-Appartamento

Great video ! (see ours in Taiwan)

@Wholelattelovepage

2 жыл бұрын

Thanks! 😃

Nice Video I have also one question. My machine is working completely normal an I get good espresso shots but out of the steam wand is not coming only steam out but more a mix with a lot of water. Do you have a idea for my problem ? Thank you

Thanks for the video. I bought my machine a year ago and today my power switch got stuck / broken! 😩 I can’t find any tutorials on how to fix this. Do you sell the replacement switch and is it necessary to open the entire casing to replace? Or if there a way to unscrew the switch from the outside? Highly appreciate your help!!!

The video was excellent. I appreciate it. I recently purchased a new Rocket Giotto Cronometro R machine, and I've had it for around 1.5 years. I've noticed a significant amount of rust and deterioration in the front area of the bottom plate, where all the machine parts rest. What could be causing this rust, and what steps can I take to prevent it?

@Wholelattelovepage

Жыл бұрын

Hi n, Rust happens when frame paint coat gets scratched and moisture makes contact with bare metal. To prevent be careful when removing drip tray to avoid damaging paint and keep the area dry.

The factory settings are amazing. It should not be up to the buyer to open the machine, but he should know that there is a real qualitative gain in cup by lowering the extraction pressure to 9 bars, and by lowering the boiler pressure to 1, or even 1.1 bars (almost no impact on the steam pressure which is powerful on this machine, except if you have to make more than 4 or 5 milk drinks). Of course, for the boiler, it could be argued that this may depend, among other things, on the origin of the coffee or its roasting. But we are on a group E61 which is not intended, it seems to me, for light roasting. Moreover, many consumers say they are sensitive to temperature and forget to have hot cups (many baristas also neglect this variable). It would be interesting to have a customization of the machine so that these two adjustments are accessible without disassembling (that must be imaginable for the pressure of the boiler, on the other hand for the access to the OPV it would be less, obvious).

@Wholelattelovepage

2 жыл бұрын

Hi bttb, Thanks for adding your thoughts. As an HX boiler machine with temps controlled by pressurestat variations in brew temperature are typically done using cooling flushes prior to making an extraction. Fairly typical among machines at this level the brew pressure and boiler pressure adjustments are under the hood. Marc

@back_to_the_bike8820

2 жыл бұрын

@@Wholelattelovepage Thanks Marc. I'm sure you've already tried (especially on the Rocket Appartamento) to touch the OPV to lower the extraction pressure to 9 bars and to lower the boiler to 1 bar. The coffee is then so much better.

Hi Bro, Did I see a manual boiler drain valve at the bottom of the copper service boiler to allow draining of the boiler? :)

@Wholelattelovepage

2 жыл бұрын

Hey C, Unfortunately the Appartamento does not have a drain on the boiler. I believe what you saw was the boiler's mounting bolt. Fairly easy to drain. If you don't know how here's a video demonstrating draining of an HX boiler Profitec Pro 500. Procedure essentially the same for the Appartamento: kzread.info/dash/bejne/o66no8lyoZypibA.html

Thank you for this awesome Video 🎉🎉🎉❤ I would Love to know how i can adjust the boiler pressure. I have the Same internals like your machine and in the other video you made is another screw. Not the red one.

@Wholelattelovepage

Жыл бұрын

HI NW, You adjust the pressurstat setting.

Excellent video! My Appartamento has been consistently overheating on startup for a bit. I've swapped out the pstat and that hasn't corrected it. Any tips on what to look for next?

@Wholelattelovepage

2 жыл бұрын

Hey Chip, So after startup it's not overheating? Or does it always stay too hot? Just want to make sure you're not taking the hissing as the boiler reaches 212F/100C as overheating. Hissing or steam for 30 seconds or so is normal as the machine is heating up prior to the vacuum relief valve closing on the boiler. If you have continuous hissing or steam perhaps your vacuum relief is clogged so not closing all the way and needs cleaning or replacement.

Great video again. Feel like I know my machine better now, thanks! I have a question about the OPV and the fact that the Appartamento is known to be set at a pretty high pressure. Mine reads 11 bars on my grouphead aftermarket gauge with the blind basket. There is alot of discussion if we should turn it down to 9 or not. Been tempted to do it but reading a lot of conflicting posts. Any thoughts on that? Any issues in doing that?

@Wholelattelovepage

2 жыл бұрын

Hi Phil, Thanks for the comment. I do have thoughts and they're based on conversations with machine manufacturers. I'll get to those in a second... First, I think a lot of people get wrapped up in 9 bar as a magic must have number for espresso extractions. I've had plenty of incredibly good shots pulled at higher pressure like manual lever shots and lower pressure like flow profiled extractions. In my experience I find flow rate of brew water is far more impactful than +/- a couple bars of pressure. So what do the manufacturers say? Luca Bezzera says they set their domestic machines with vibration pumps to 11 bar in order to provide a good potential flow rate of the brew water. Vibration pumps have lower flow rates of 7-8 g/s than the 10-11g/s from commercial rotary pumps. There's no issue with setting to 9 bar. I say give it a try, taste and see if it makes any difference in the cup. You can always put it back to 11. You'll likely be grinding a bit coarser and maybe that works out with your other variables and maybe it doesn't.

@lepepus

2 жыл бұрын

@@Wholelattelovepage thank you for the comprehensive reply, will give it a try!

@timgerber5563

2 жыл бұрын

Hey Phil, just one thought I had regarding the exact same thing: Since the pressure gauge at profitec flow profile equipped machines also reads the pressure without a blind basket, but rather with ground coffee in the basket, I would rather go a bit higher than 9 bars with pump pressure, because essentially pressure is lowered by there being a release in terms of water flow through the espresso puck. So I would probably dial in my espresso first, then reduce pressure to see what the pressure gauge reads while extracting espresso. As wholelattelove pointed out extraction times might go up with less pressure, maybe requiring you to grind coarser, but I believe this way you get a better idea of what the actual brew pressure is instead of just the nominal pump pressure.

@lepepus

2 жыл бұрын

@@timgerber5563 that is correct, but based on some, pump pressure should be 9 which, you are right, will end up closer to 8 in the basket while brewing and that would be the "classic" way to brew. Because dialing in pressure at the puck level would be very irregular as all coffees are so different and flow differently. Pump pressure at 9 appears to be the sweet spot between good pressure for extraction and preventing channeling... Anyway, James H. appeared really ticked off at the fact the this and so many other machines are set higher than 9. :)

Superb video, if my pressure is dying every now and then, like in the morning after heat up, would it be that the pressure valve is faulty at the bottom that sets the bar?

@Wholelattelovepage

Жыл бұрын

Hi Alex, Pressure drop can be caused by a pressure leak or by the boiler not heating. Most likely place for a pressure leak is from the vacuum relief valve on top of the boiler. Once closed when the boiler reaches boiling temp it's unusual for the valve to leak. If it leaks it would make a sound. Leaks of pressure from anywhere would generally have a sound of some kind. Pressure dropping after initial heat up could indicate a bad component like a pressurestat or relay that fails when it gets warm.

awesome video Brian! do you know why my apartmento would heat up properly up to 1.1 bar, then after about 45mins, the pressure would just drop to about .75 bar and stay there? it would then rise again if I pulled steam, hot water, or brew?

@Wholelattelovepage

Жыл бұрын

Hey dc, Thanks for the comment and question. Not 100% certain but sounds like the pressurestat is not operating properly.

please do Sanremo CUBE! ☺️

Thanks for this, can I adjust steam pressure with this style of pressurestat? the older ones had a screw, this one is waxed in place. I have already adjusted brew pressure down to 9 bar but the steam is to high and (for me) makes steaming milk very difficult.

@Wholelattelovepage

10 ай бұрын

Hi JM, Thanks for the question. It likely is adjustable if it's the box type stat with wax mark. But, understand the manufacturer put the mark there for a reason. Likely to hold the position set and/or to alert for tampering. Don't advise changing the setting - lowering pressure in the boiler will lower the brew temperature as well. As an alternative you could bleed some steam through the wand before frothing to reduce pressure or take water out through the hot water wand until the pump kicks on and adds cool water to the boiler which will lower the pressure. Hope that helps!

Did I see a manual boiler drain valve at the bottom of the copper service boiler to allow draining of the boiler?

@Wholelattelovepage

2 жыл бұрын

I believe what you saw was the boiler's mounting bolt. Fairly easy to drain. If you don't know how here's a video demonstrating draining of an HX boiler Profitec Pro 500. Procedure essentially the same for the Appartamento: kzread.info/dash/bejne/o66no8lyoZypibA.html

Brian- Awesome video! Can you comment to how the heating element is sealed in place in the boiler? Is this pipe thread with teflon tape? Or some kind of o-ring face seal? Or some other method?

@Wholelattelovepage

Жыл бұрын

Hey Thanks for the comment and question! The seal is a flat gasket made out of teflon. Brian

@a_mouse6858

Жыл бұрын

@@Wholelattelovepage I've seen a number of boilers and elements in similar machines that have a V-shaped o-ring groove along the sealing surface. Presumably this is for a Viton (or other FKM) o-ring. Is there a reason these never seem to be used? If just using a teflon gasket, why even have the V groove?

When would you use the green eco button? Could you give some situations in when one could or should use it? Thank you

@Wholelattelovepage

2 жыл бұрын

Hi Carlos, The ECO button when turned on will power down the boilers after a period of no use of the machine. I believe it's 90 minutes. You might not want ECO on if your machine is all warmed up and you know you'll be using it more than 90 minutes in the future and don't want to have to wait for it to warmup again. Marc

@carlossanchez8534

2 жыл бұрын

@@Wholelattelovepage thank you Marc :)

@timgerber5563

2 жыл бұрын

Not every machine has it though. It only became obligatory a few years ago. My 5 year old appartamento doesn’t have it yet.

Are you able to adjust this Campini pressure stat? The screws are covered in red plastic, making them very difficult to access. I want to lower my boiler pressure.

@Wholelattelovepage

2 жыл бұрын

Hi KL, The pressure stat is adjustable. They put the red stuff on the adjustment to discourage end users from adjusting. Know that if you lower the boiler pressure you will also reduce the brew water temperature - lowering the pressure reduces the temperature in the boiler.

Nice! Can you do this with the BZ10? Thanks

@Wholelattelovepage

2 жыл бұрын

We're planning to to this for a bunch of machines! Hopefully we'll make it to the BZ10 eventually.

Hi Marc from WLL and team, My rocket apartamentos power switch is stuck and won’t go up to the “on” position. Did the switch fail ? If so, is there a video you may have on how to replace that ?

@Wholelattelovepage

2 жыл бұрын

Hi B, We do not have a video showing how to replace the switch. But it's fairly easy to do once the machine's housing is off and we do have a video for that: kzread.info/dash/bejne/lIaItKqNdcnSqLw.html Marc

I’m looking for a leak that only seems to occur when the machine is turned on. Is it safe to remove the casing and turn the machine on in order to find the leak? Thank you so much!

@Wholelattelovepage

2 жыл бұрын

Hi R, It is relatively safe so long as you use reasonable caution if powering up the machine with the case off. Do not touch or cross any exposed wires.

My machine has the ma-ter pressure switch. I'm on my 4th in 3 years. Why is this one in your video different? Have they moved to a more reliable one? If it's better, is the new one a drop in replacement?

After the unit has heated up for approx. 12 minutes, I begin having steam continuously releasing from the piece pictured at 12:55 in the video (the safety relief valve vent). Pressure stat has recently been replaced but didn't fix the issue. What would you recommend to correct the problem? Thanks

@Wholelattelovepage

Жыл бұрын

Hi Tony, continuous release of steam from the vent means the boiler is too hot or the valve is defective and stuck open. Boiler could be too hot because pressurestat is adjusted to high or heating element is not turning off. If boiler is too hot the high limit switches on top of boiler would probably trip.

@tonyrodriguez9942

Жыл бұрын

@@Wholelattelovepage Thanks for the insight, I'll give it a try. However, my limit switches have not tripped and pressure remains 1.0 to 1.5 bar the entire time once the machine is brought up to temp. Must be a defective safety relief valve.

Hello, I am planning to install an extraction timer for my appartamento, can I please ask which wire inside the machine I can use to connect the electricity.

@Wholelattelovepage

2 жыл бұрын

Hi Brian, Thanks for the question. Can't answer that as I do not know what type of power you need.

Can you adjust the Campini pressurestat or is it best to leave it as is?

@Wholelattelovepage

Жыл бұрын

Hi RF, Believe Rocket would like you to leave as is but it is adjustable. Understand it will change brew temp if adjusted.

where can i order the light switch?

Where is the circuit breaker switch? i put my machine on the side while there was a little water on the bottom and it might have caused a short! how can i reset it? Thank you

@Wholelattelovepage

2 ай бұрын

Hi e, No internal circuit breaker. Water in machine can cause regular household circuit breaker to trip - especially GFCI type. Remedy for water in machine is unplug from power, remove housing and let dry out for 24 hours. Fan can help.

Hi Whole Latte Love, if I wanted to connect a brew pressure gauge to my appartamento which line would I tap into with the manometer capillary tube? thanks

@Wholelattelovepage

Жыл бұрын

Hi o, Brew pressure gauges usually read pressure in the line after the pump and OPV. You need to put it in the line running between the OPV and the heat exchanger. Since the Appartamento has an E61 group an easier option is mounting a pressure gauge to the port on the group. There are aftermarket gauges available which mount in the hole revealed after removing the Allen head bolt in the sloping front of the group. Gauge at this location gives a better reading of actual pressure in the group during an extraction.

@otterolly

Жыл бұрын

@@Wholelattelovepage thanks for your help

@otterolly

Жыл бұрын

@@Wholelattelovepage thanks, your help is much appreciated

Is there any way to adjust the water temperature of the Appartamento? My sense is that it’s running too hot.

@Wholelattelovepage

Жыл бұрын

Hi L, Yes there is a way. Here's a link to place in this video which show the pressurestat: kzread.info/dash/bejne/i4eYzM5phajHdLg.html In more recent Appartamentos the pressurestat will look like the one in the video. May look a little different in older models. Adjusting the pressurestat by turning the control changes the pressure (and therefore the temperature) in the boiler. Notice in the video there's red paint over the adjustment. Rocket would prefer the end user does not adjust the pressure/temperature. Know that in heat-exchange boiler machines like the Appartamento the boiler typically runs much hotter than the desired brew temperature. The difference between boiler temp and brew temp changes depending on variables like how long the machine has been on, time since last use and ambient temperature. Standard operating procedure for HX boiler machines controlled by pressurestat is to use a cooling flush prior to making espresso. To do that, right before pulling a shot, without the PF attached lift the lever and let the pump run until brew water flow from the group has smoothed out with no excessive steam or bubbling. Usually takes a 3-8 seconds for smooth flow. Using cooling flushes like this allows a user to quickly manipulate brew temps. For cooler temps flush a bit longer. For hotter temps use a shorter flush. Here's a video on how to use cooling flushes: kzread.info/dash/bejne/lHyHqKSGY8a9eKw.html Hope that helps! Marc

My rocket appartamento boiler is not copper it is silver and most pipes are silver and not copper , why is this do you think? I bought it new recently.

@piranhaa2

2 жыл бұрын

I just noticed the same thing on mine. COVID cost cuts?

Hi, What is that exact pressurestat? Can we find that replacement part?

@Wholelattelovepage

Жыл бұрын

Hi Jody, If you're in the US or Canada we can def help you get the part. Over the years Rocket used 2 different pressurestats in the Appartamento. We have both in stock but our tech support staff would need to know which one is in your machine now. Take a photo of your current Pstat and contact us here: www.wholelattelove.com/pages/contact-us

Rocket's manual seems to suggest against descaling. I've had the machine for a while and the water I use (although bottled) is still fairly hard. Should I descale my machine?

@Wholelattelovepage

Жыл бұрын

Hi DA, Most all manufacturers recommend against end users descaling espresso machines. Why? If severely scaled, scale particles can break loose during descaling and clog internal components of machines. In reality, descaling HX boiler machines like yours is relatively low risk. Should something clog during descaling it's fairly easy to access and correct - if you're comfortable using basic tools. And, unless scale deposits are moderate to severe you're unlikely to have any problems. I'll link a video below showing how to descale an HX boiler machines like yours. Going forward, it's best to filter your water using calcium to magensium ion-exchange to reduce calcium hardness while maintaining a mineral level needed for good flavor and corrosion prevention. BWT Water and More has a number of solutions including low cost drop in reservoir pouches: www.wholelattelove.com/products/bwt-bestsave-s-anti-scale-filter and a filtering pitcher: www.wholelattelove.com/products/bwt-penguin-2-7-l-water-pitcher Both of those when used as directed prevent scale from happening in the first place. How to Descale HX bopiler Espresso Machines: kzread.info/dash/bejne/q3l7yNuDm7q5obg.html Hope that helps! Marc

@Architect_Art_Vandelay

Жыл бұрын

@@Wholelattelovepage you have the most helpful channel. Thanks for the info!

@Wholelattelovepage

Жыл бұрын

@@Architect_Art_Vandelay You're most welcome!

The inside of my Rocket Appartamento does not look like this. My pressurestat is round and says MA-TER

@Wholelattelovepage

Жыл бұрын

Hi Vince, Yes, the pressurestat used in the Appartamento was changed a few years ago. No difference in performance.

Hello, my 6 year old rocket apartamento don’t start. The green light indicator turns on very low. We don’t have specialized service in my country. But I have access to all components and replacement parts. A few months ago we replace the on/off switch successfully with a local technician and an original switch. Is there a chance you can help me with find where is the error please? At least a few pointers or recommendations? Thanks in advance.! J.Luna from Mexico

@Wholelattelovepage

Жыл бұрын

Hey Run, here's a link to video on diagnosing heating issues on the Rocket Appartamento which may help: support.wholelattelove.com/hc/en-us/articles/4715260065939--Rocket-Espresso-Appartamento-Heating-Issues And here's a link to our support site for the Appartamento with diagrams, manuals and more videos and articles which may be of help: support.wholelattelove.com/hc/en-us/sections/1500000401242-Rocket-Espresso-Appartamento

@runcmcrun

Жыл бұрын

@@Wholelattelovepage perfect.! Do you have something for no green light or/and very low green light? Thanks again!!

I tried pulling out the water level probe to see if it was causing the overheating issue but now the probe won’t get tightened when put inside the boiler, do you know what would be the issue?

@Wholelattelovepage

7 ай бұрын

Hi c, The probe goes thru a teflon fitting. The nut there can be tightened. It's a compression fitting that clamps the teflon fitting around the probe.

@chulolo997

7 ай бұрын

@@Wholelattelovepage it seems that the teflon fitting has fallen inside the boiler, any suggestions on how to take it out? Or if I can just leave it inside

So......can the "Eco mode" be turned off then? ie. it doesn't go to sleep after 90 odd minutes?

@Wholelattelovepage

2 жыл бұрын

Yes, that green switch on the underside enables or disables the eco mode function.

@mustafading

2 жыл бұрын

@@Wholelattelovepage Aww......brilliant! Cheers from Ireland :)

@mustafading

2 жыл бұрын

No......2019 European version doesn't have that button/switch option. Bummer. :)

Please Show the Bezzera bz10 Detail for Detail thanks ;-)

@Wholelattelovepage

2 жыл бұрын

Hi CK, Thanks for the request.

@christophkohler8607

2 жыл бұрын

@@Wholelattelovepageplease do it, best show the installation and removal of the boiler with decalcification ;-) thank you

Is it safe to descale this machine?? I think i have scal buildup inside the boiler.. any suggestions on what i can do? I don't have professional service available where i live so any advise will be appreciated

@Wholelattelovepage

Жыл бұрын

Hi TCA, Heat-exchange boiler machines can be descaled. If you know there's severe scale buildup in the machine be aware descaling may not get everything and there's a risk some scale could break free without dissolving and plug components in other parts of the machines. If scale is mild you can follow this video on how to descale a heat-exchange boiler machine: kzread.info/dash/bejne/q3l7yNuDm7q5obg.html

@Coffeesatisfaction_

Жыл бұрын

@@Wholelattelovepage Does this apply to Rocket appartamento?? As it has a Copper boiler & rocket does not recommend descaling their machines.. any updates on this topic?

@Wholelattelovepage

Жыл бұрын

@@Coffeesatisfaction_ Most every manufacturer has some language in their manual about not descaling their machines or having a professional technician perform the service. I believe it's there to cover themselves from end users neglecting the machine, having lots of scale build up then descaling the machine and having issues due to clogs caused by large pieces of scale plugging machine elsewhere. If a machine is not neglected and scale is very minor then descaling a machine with a heat exchange or single boiler is okay for a home user. Marc

@Coffeesatisfaction_

Жыл бұрын

@@Wholelattelovepage makes sense.. but how do I know for sure if the boiler has scale inside?

@Wholelattelovepage

Жыл бұрын

@@Coffeesatisfaction_ One easy way to get an idea is to remove the mushroom from the E61group head and check for scale there. If there's a lot, that's a good indication there's likely scale elsewhere. Here's a video with more on the E61 group and mushroom: kzread.info/dash/bejne/d4B92aZtYNfZotY.html

First coment 😅