rocker arms falling off fix rockerlocks.com
Автокөліктер мен көлік құралдары
Rocker locks are a spring clip designed to hold the rocker arms in place on the Dodge Ram, Durango, Dakota & Jeep 4.7 V8 and the 3.7 V6, to alleviate the problem of falling rockers. This is a non moving part it just sits on the rocker arm & moves with it & holds the rocker arm in place.
I had this problem with my 03 Ram 4.7 & found out after calling around all the way to Chrysler corp that no one had a fix for it. So I set out to find one & I did, I designed a spring clip & put it on the 2 rockers [that fell off 3 times in 3 weeks]. I have had no problem since I installed the rockerlocks, The rockerlocks have been on now for about 4 months & 5,000 miles , the rocker arms are still on with no problems, these really work. It's now been about 6 months & around 8,000 thousand miles still running with no problems. Call me today if you are having problems or have questions, I now have my patent and am ready to sell & to help others with this problem. Let me help you save your truck as I did mine. Without these rocker locks my truck was junk. They saved my truck that I love and they are very affordable. Price is $15.00 ea or $12.00 ea in a full set. For a set of 12 for 3.7v6 or 16 for 4.7v8. That's only $144.00 or $192.00 a set. This is a very low price to pay to save your beautiful truck and to get you on the road again. It cost me much more developing these for my truck & worth every penny.I've been told it costs about $1,500.00 to have your heads rebuilt & almost always the same problem still persists. Call today be back on the road in no time. Any questions call Jim 816-274-2730. Feel free to leave a message if I no answer feel free to go email [rockerlocks1@gmail.com] & leave comments or questions on the product. I guarantee these really work. This is the [best & only way] on how to fix rocker arms falling off that I have found [actually the only way]. Over 10,000 miles and counting and still running strong. These are all hand made: cut,drilled,bent to shape & heat treated to spring steel quality they are very tough. Order your rockerlocks today, be back on the road tomorrow. [We have now sold thousands of rockerlocks with no complaints! This tells me they are working great for everyone.]WE are sure these will fix your problem of rocker arms falling. We are giving a 30 day warranty because we want to help you fix your truck with no risk to you. If you have any problem with rockers falling off within 30 days after installing rockerlocks simply send them back for a full refund minus shipping & handling]. Also there is a minimum order of 2 pieces due to shipping & handling expenses. [and free shipping to u.s. addresses] go to rockerlocks.com to purchase.
Пікірлер: 50
Thanks Jim, own an 05 Dakota, doesn't have those although I've never had a problem width he rockers falling off. Just replaced all the lifters at 177K miles. Good stuff !
I actually used a body clip and ground it down to fit the rocker arm a little better but basically the same exact idea as yours. It works 100% I have been running mine for about 2 years with them and have not had one pop off yet.
Thank you, Jim sure helps a lot
Love the tip. Thank you very much for that info. 👍🏻
Hello Jim, I just watched your video on rocker locks, I have a 2005 Jeep Grand Cherokee Laredo 3.7 V6. Can you tell me where I can purchase them for all rockers on my vehicle? I don't see a link on the U tube video I just watched, I am the 1st it looks like to give you a thumbs up. Thank you, Gary/Air Force Veteran
It would be interesting to know how to remove the rockers for service.
Nice video
Hey jim where did you buy those clips from. I need to fix my 4.7 and I need those clips ASAP THANKS FOR YOUR GOLD NUGGET REPAIR .
Awesome
Hey Jim I have altis 1.6 manual transmission 2012 model. Last week I put it in 4 gear and all of a sudden a very loud noise came and the engine died. I towed it to Toyota dealership where they checked the engine compression which was 0 in 3 cylinders. They took the tappet cover off and there were 7 rockers lying in the engine out of 16 rockers. I had put a cold air intake, 6 puck clutch, straight pipe and spark plugs which are all aftermarket things and not genuine. I did this to increase acceleration of my car. Can you tell why did the rockers fall and if I now race my car will they fall again? I have never experienced this before in any altis 1zr fe engine. Can you please help me?
where do you get those retainers for rocker
Hey Jim.I like the idea ,,but how do you get it apart if you have to change a bad lifter?
@jimhardisty9900
2 жыл бұрын
never had to take them off yet. but i'm sure you could use a valve spring compressor.
@Markggoose
10 ай бұрын
You can pop them right out with a screw driver as long as you rotate the engine so the cam lobes are up on each rocker.
Any idea where I can find some of them
Fantastic idea! well done. I'm all for making a profit but $192.00 for 16? kind of steep don't you think? A thin washer about .085 thick washer under each lifter will work too.
@deeppowhazylab
3 жыл бұрын
lol 2 years late but you dumb
@johnsmith6368
3 жыл бұрын
@@deeppowhazylab He is not dumb. People do it and it works.
@jimhardisty9900
2 жыл бұрын
washers dont work i tried that first.then i spent over 2 months figureing out this design.it's a quit a bit of work making them i wouldn't make them for any less it's just not worth it.& ive put smiles on thousands of faces because this the only solution to this problem.every one that bought them thanks me for saving there truck.
@jimhardisty9900
2 жыл бұрын
washers don't work usually didn't on mine.far as the price it's a lot of work making these plus your paying for my knowledge in knowing how to make them.i wouldn't make them for anything less just wouldn't be worth it.
Do you have international shipping services I want one piece
Those lifters work off oil pressure, if yours are falling off all the time I would be checking oil pressures
@user-pg9hk3dn8z
11 ай бұрын
Has nothing to do with oil pressure it is caused by lifter sticking a fraction of a second and the rocker arm has nothing to keep it in place ( poor design) usually starts around 100,000 miles and most often on a cold start when motor has sat for a few days that lifter sticks for .01 second and it will pop off. But there is a cheaper way to do this if you are crafty I use a body clip and grind down the hole for the bolt to a large enough hole to allow movement and then grind and smooth all edges .this works great and I have ran mine for 2 years or better and have not lost one yet
@longschl0ngJoe
9 ай бұрын
@@user-pg9hk3dn8zdid you happen to document the process at all?
if the price was reasonable i might consider, but at over 200$ ill just get lifters and put 2 dollar washers under them
Hahaha I'm using concrete nail in the that little hole, my rocker arm is no more falling down. but my valve is bend so my car is still misfiring😢 and knocking
@jimhardisty9900
2 жыл бұрын
maybe the nail bent your valve sorry to here that.
You popped that on with a screw driver in 2 seconds 😭😭😂 i just ordered a "special" tool for my ford 5.4 2valve.
@d4rk5tar97
3 жыл бұрын
some things come with time and practice kkk like his know-how
@johnjoe9918
3 жыл бұрын
@@d4rk5tar97 yea I realized after the special tool came in the mail and didn't even fit how it was supposed to. Ended up trying his screwdriver trick and after 2 tries it popped right on.
Dirty oil deposits plug the lash adjusters from lack of oil changes. Thus, making the rockers loose. you could clean them out? Change the oil?
@user-pg9hk3dn8z
11 ай бұрын
And no this problem has nothing to do with clogged or dirty anything. These rocker arms are designed poorly and have no lip on them to keep them from coming off. All it takes is the lifter to stick a fraction of a second and your rocker arm will be sitting at the bottom of your head when you pull valve covers. Dodge knows this is a common problem with this motor and starts doing this at about 80,000 to 100,000 miles usually on a cold start when sitting for a bit. The oil dries up and when you crank it that lifter sticks for 00.01 second and it will happen
Why not just replace the failing lifters?
Why would one of these fall off in the first place?
@KGamer2015
2 жыл бұрын
I think the valve is bend or poor springs. Mine was bend valve
@Steel_Valley_Vintage_Cycle
4 ай бұрын
Sticky valve guides
Where do you get those clips
@jimhardisty9900
2 жыл бұрын
rockerlocks.com
@chadobrien6795
2 жыл бұрын
@@jimhardisty9900 will these work on my 4.6 2001 f150? The rocker arms are almost the same.
Where can we purches those rocker lockers
@jimhardisty9900
6 жыл бұрын
sorry so late getting back to you just checked messages go to rockerlocks.com any questions call me 816-274-2730 thanks jim.
@josemora1596
5 жыл бұрын
Jim Hardisty l
@jimhardisty9900
2 жыл бұрын
rockerlocks.com
Is only thing th8t will work!..
$145 plus shipping for 12 pieces of sheet metal? I'd say thats a ripoff in my book. I can get a whole set of rockers and lifters for $100.
@phunny1234
5 жыл бұрын
Let's put this in perspective, you're spending $145 to save from spending $4000. When a rocker pops off and jams up a valve spring, bending the valve and you get to sit by the side of the road with a blown motor wishing you'd spent the $145............
@jimhardisty9900
2 жыл бұрын
yeh i know but that don't fix the problem these do.
@VaughnG71
2 жыл бұрын
@@jimhardisty9900 Actually I ended up putting a thin washer under each lifter to tighten the tolerances, cost me about $2 for all of them and haven't had another problem in 3 yrs. so yeah, they a a rip off.
@jimhardisty9900
2 жыл бұрын
yes you can but it don't fix the problem
Jim your not to smart the valve seat comes out of the head so now the head is junk,4.7 &3.7 crap motors