For shopping/ Para comprar: +34 685 86 89 04 Whatsapp & Tel. www.robertobruna.com
Жүктеу.....
Пікірлер: 27
@fredericgalliot83842 жыл бұрын
belle démonstration sur vos outils un point sur le risque des jets HP (EPI)
@ViperJetDrain2 жыл бұрын
nice video
@nozzlesandthings2562
2 жыл бұрын
thanks!
@dourryrojas67012 жыл бұрын
Mi tuberia del lavabo lo tengo tapado como consigo un equipo de eso mil gracias si me puede atender
@epkk823 ай бұрын
Hej man, what is song?
@silosvince2 жыл бұрын
I have a 3500 psi pressure washer with 4.5 gpm. Do you have a nozzle that will cut roots with this kind of machine?
@nozzlesandthings2562
2 жыл бұрын
None of our nozzles would work for that flow rate, you will not be able to cut roots with that flow rate, that water simply does not have enough strength to be able to do it, there is no nozzle and if they want to sell it to you, do not buy it, it will not work with you. that flow. With 40 l/m you can start working on those roots, but no nozzle with chains will work for you, you can only do it with a nozzle with 2 jets, like the Tarantula, since you concentrate the force in 2 jets, and you would have a force of 20 l/m for each jet, for small roots you would be able to remove it.
@drain1192 жыл бұрын
good
@danielbello80082 жыл бұрын
Que equipo se ocupa para que funcione así con esa presión de agua ?
@nozzlesandthings2562
2 жыл бұрын
40 l/m 200 bar 22 cv, un saludo!
@PARKERBROTHERSPLUMBING2 жыл бұрын
name and where to buy these nozzles?
@nozzlesandthings2562
2 жыл бұрын
www.robertobruna.com write to info@robertobruna.com
@JorgeGarcia-qm2xv2 жыл бұрын
Greetings We have a piece of equipment that works at 4200 psi, 4 gpm with a 1/4" hose and cuts the roots perfectly without any problem, I don't know why you say it can't. It's a matter of ingenuity and patience. And another Electric equipment of 3000 psi, 5.5 gpm with a 3/8 "hose is 220 at 3 phases and cuts the roots perfectly.
@nozzlesandthings2562
2 жыл бұрын
Of course, roots were also unblocked with rods and with a spring machine many years ago, it was also a matter of ingenuity and patience. I mean that for a professional it is not appropriate to go with this type of flow to cut roots. It also depends on the size and number of roots. Maybe I got confused that it can't be done, I meant that it can't be done professionally. There are many tools with which they can be done, there are also electrical equipment without water... We recommend at least 40 l/m to remove roots and we agree with most equipment manufacturers.
@carmeloalvaropatlangonzale3631 Жыл бұрын
Tienes algún contacto para poder encargarte una boquilla
@nozzlesandthings2562
Жыл бұрын
Escribenos a info@robertobruna.com o llamanos al +34 685 86 89 04
@FranciscoPerez-dx8xe Жыл бұрын
Hola para comprar una punta de estas
@nozzlesandthings2562
Жыл бұрын
Escríbenos a info@robertobruna.com o llámanos al +34 685 86 89 04
@BigDogRidgeback3 ай бұрын
Jet rodders
@FranciscoPerez-dx8xe Жыл бұрын
Qué número tenía yo lo que llamada número de teléfono
@nozzlesandthings2562
Жыл бұрын
Escríbenos a info@robertobruna.com o llámanos al +34 685 86 89 04
@FranciscoPerez-dx8xe Жыл бұрын
Me interesaría el número teléfono o donde lo vende
@nozzlesandthings2562
Жыл бұрын
Escribenos a info@robertobruna.com o llamanos al +34 685 86 89 04
@sulanginaja
8 ай бұрын
This number Whatsapp?
@JorgeGarcia-qm2xv2 жыл бұрын
Give me your email and I can send you videos of root cuts
Пікірлер: 27
belle démonstration sur vos outils un point sur le risque des jets HP (EPI)
nice video
@nozzlesandthings2562
2 жыл бұрын
thanks!
Mi tuberia del lavabo lo tengo tapado como consigo un equipo de eso mil gracias si me puede atender
Hej man, what is song?
I have a 3500 psi pressure washer with 4.5 gpm. Do you have a nozzle that will cut roots with this kind of machine?
@nozzlesandthings2562
2 жыл бұрын
None of our nozzles would work for that flow rate, you will not be able to cut roots with that flow rate, that water simply does not have enough strength to be able to do it, there is no nozzle and if they want to sell it to you, do not buy it, it will not work with you. that flow. With 40 l/m you can start working on those roots, but no nozzle with chains will work for you, you can only do it with a nozzle with 2 jets, like the Tarantula, since you concentrate the force in 2 jets, and you would have a force of 20 l/m for each jet, for small roots you would be able to remove it.
good
Que equipo se ocupa para que funcione así con esa presión de agua ?
@nozzlesandthings2562
2 жыл бұрын
40 l/m 200 bar 22 cv, un saludo!
name and where to buy these nozzles?
@nozzlesandthings2562
2 жыл бұрын
www.robertobruna.com write to info@robertobruna.com
Greetings We have a piece of equipment that works at 4200 psi, 4 gpm with a 1/4" hose and cuts the roots perfectly without any problem, I don't know why you say it can't. It's a matter of ingenuity and patience. And another Electric equipment of 3000 psi, 5.5 gpm with a 3/8 "hose is 220 at 3 phases and cuts the roots perfectly.
@nozzlesandthings2562
2 жыл бұрын
Of course, roots were also unblocked with rods and with a spring machine many years ago, it was also a matter of ingenuity and patience. I mean that for a professional it is not appropriate to go with this type of flow to cut roots. It also depends on the size and number of roots. Maybe I got confused that it can't be done, I meant that it can't be done professionally. There are many tools with which they can be done, there are also electrical equipment without water... We recommend at least 40 l/m to remove roots and we agree with most equipment manufacturers.
Tienes algún contacto para poder encargarte una boquilla
@nozzlesandthings2562
Жыл бұрын
Escribenos a info@robertobruna.com o llamanos al +34 685 86 89 04
Hola para comprar una punta de estas
@nozzlesandthings2562
Жыл бұрын
Escríbenos a info@robertobruna.com o llámanos al +34 685 86 89 04
Jet rodders
Qué número tenía yo lo que llamada número de teléfono
@nozzlesandthings2562
Жыл бұрын
Escríbenos a info@robertobruna.com o llámanos al +34 685 86 89 04
Me interesaría el número teléfono o donde lo vende
@nozzlesandthings2562
Жыл бұрын
Escribenos a info@robertobruna.com o llamanos al +34 685 86 89 04
@sulanginaja
8 ай бұрын
This number Whatsapp?
Give me your email and I can send you videos of root cuts
@nozzlesandthings2562
Жыл бұрын
info@sewercleaningnozzles.com
Ó