Dude your personality 😂😂😂awesome

Wow 😮😊😊 hes got the bambe bucket on there outstanding great job 👍👍👍 you need the longer line on there 😊😊😊 it's to short .

@JestRR

5 ай бұрын

The reason for the short line is so you can see it in your peripheral vision. I have tried a long line and it takes a bigger pool/lake to get the bucket in. NOT undoable, but so hard it’s not fun.

Blackhawk Done! We have a Blackhawk Down!

Mike I think the issue was you didn’t have any pilots up front flying!

Sux bro, hope you got her goin again

Nice helicopter

Hey man, I generaly like black hawks and this one is amazing. One question, did u make it yourself or you bought it from somewhere! Hoping for you to see this

@JestRR

5 ай бұрын

This is the Roban 700 size super scale. My only gripe is the tail wheel is too thin, and the wrong angle, and where the strut attaches is completely wrong. Lots of things wrong with the tail landing gear. But it’s not my heli any more.

Was it one of the mounting screws was too long?

I like the idea of building choppers from scratch and I want to try to but idk how to start. Iv got a bicopter in the works and I hope to make a tutorial and build Gide along with plans.

Good morning, Out of curiosity do you happen to know of a shop selling UH-60 spare parts? We are in the search for a main module. Thank you

@JestRR

2 жыл бұрын

No, sorry. might try Motion RC

Wow the landing gear should be able to absorb that much of a drop, thats ridiculous. Needs a better design. At least it wasn’t a total loss. I’m flying 3D helis and I really want to start flying scale. Oh well have fun.

@keithwhisman

5 жыл бұрын

22lbs holly crap. What a beast. I’m really wanting to build the 700 AH1W cobra arf and mark it for Army service.

Nice heli :) But please use quality electronics and you wont have issues like this. Egodrift or xnova motor, hobbywing v4 or YGE speed controller. Also that castle bec pro is.... well i would not trust it even on a cheap 450 heli. On the long run its always cgeaper to use quality parts. Now i want to build a scale heli too :D

@JestRR

2 жыл бұрын

I don’t use those motors or ESC’s that you are talking about because this heli set up was supplied by RC AERODYNE. They may work for you and that’s great. I’ll stick to what I know works for me.

@tamasgiczi

2 жыл бұрын

@@JestRR i understand, but according to the video, this setup is not working for you either. Anyway, nice heli, the most important is enjoy what you do :)

@JestRR

2 жыл бұрын

@@tamasgiczi everything usually works….right up until the time it doesn’t. These damn thing can shit the bed at anytime. All we can do is mitigate a failure. All in all, the crash wasn’t that bad. New motor, re glue the landing gear mount wood and I was back flying the next day!! With tons of flights up until now!! Probably going to explode next time I run it just cause all the sudden we are talking about it!! Just hope I catch it on video!!!

Dude, the video of the Helo looked pretty cool after the camera got knocked over, hopefully the camera didn't break. What is the point of carrying the orange thing for (I fly fixed wing) I was surprised that the wheel strut broke dropping from that relatively low height, but I guess all the weight coming down on it was pretty substantial. Nice helo and flying technique by the way.

@JestRR

2 жыл бұрын

That’s a Bambi bucket for Fire Fighting. That heli is over 22 lbs so it was like dropping it from a standing position. Not much will hold up to that anyway…thanks for the compliments!!

How many flights do you have on it and what size is it? For the motor to just go is crazy

@JestRR

8 ай бұрын

I had had it for a few years, maybe 50 flights. And Yes it was a short lived life of the motor. Kinda cheap too

What kind a crash 🤔🤔

Hey this is a 700 size ? And do they make a 800 in the black hawk?

@JestRR

7 ай бұрын

It was and no, they just make this one.

@geovaniboothe1992

7 ай бұрын

@@JestRR was ? What happened the crash wasn’t that bad it came straight down not even propeller or gear damage

@JestRR

7 ай бұрын

@@geovaniboothe1992 the motor detonated. Thank god it was only a few feet off the ground. Broke the mounts for the gear and maybe a hole in the bottom. Was fine shortly there after

How do you build choppers like this? I can’t find tutorials or anything.

@JestRR

2 жыл бұрын

All mine come as fiberglass kits or kits that are close to being done and just need to be put together and or modified to my liking…. To build from scratch, first you make a plug, and that varies in technique, then you make a mold to create a negative of the plug, which is used to pull a fiberglass shell from. Then you build in wood work to hold your mechanics. It’s a lot of work, but sometimes that’s what it takes to get exactly what you want.

@excellenceinanimation960

2 жыл бұрын

@@JestRR Iv got a question. Iv got a little collective pitch copter that is deffnetly over my head as a beginer but i was hovering it around and doing ok. My question is, why when I am on the ground and the rotor is going does it tip sideways and the blades strike the ground? Its just cost me a little gear iv gota get and i wasnt really moving the sticks. I can't figure it out or really keep it from happening. also happends when flying on the simulator a lot! Thanks, Matt

@JestRR

2 жыл бұрын

@@excellenceinanimation960 what you are trying to do is balance the heli on a ball. It’s constantly trying to fall off. To keep it from tipping over while you’re learning to fly, get some small wooden sticks and some ping-pong balls or wiffleball‘s and strap onto the skids so that when it ships over it won’t completely fall over.

@excellenceinanimation960

2 жыл бұрын

@@JestRR ok. Sounds good. It doesn’t feel like Iv got much control when I’m on the ground tho. And the blades still dip. Is this just user error?

@JestRR

2 жыл бұрын

@@excellenceinanimation960 could be….but more than likely it’s just the skids grabbing the ground and tipping the heli. It’s called dynamic rollover. This is what the sticks will help prevent!

I am going to blame it on the pager 😂 I am a first responder

@JestRR

2 жыл бұрын

HA HAA HAAAAA!!! Ain’t that the truth!!! Stupid pagers and people with their emergencies!!!🤣😅🤪

It’s because you have a PaveHawk performing a Bambi Bucket mission. Hahahahaha.

What head speed are you running?

@JestRR

2 жыл бұрын

I think I fly this one at 1250….about the same for all my 4 bladed Roban’s

@jdsstegman

2 жыл бұрын

@@JestRR Thanks for your reply. I'm building one now and didn't know what speed to run. Also, who's blades are you running?

@JestRR

2 жыл бұрын

@@jdsstegman the 700mm blades that came with it. But if you don’t have blades, any 3D blade will work better than these. Might even be able to get bigger ones….

@jdsstegman

2 жыл бұрын

@@JestRR thanks for the info. I tried a set of plastic scale blade but they flex too much and flare up. So yeah, just 3d blades.

@JestRR

2 жыл бұрын

@@jdsstegman have done that several times! 3D symmetrical blades fly much smoother for scale ships. And they are readily available! Have serval scalers with them. Just paint them up like the full size then balance them….

I know it doesnt help....but Had you been higher would have completely destroyed the bird!!!!!!

@JestRR

6 ай бұрын

I might have been able to auto it in if it were really high!! 50/50 shot!

Best crash I’ve ever seen

@JestRR

8 ай бұрын

Obviously you haven’t seen my MD600N Notar crash!!

@geovaniboothe1992

8 ай бұрын

@@JestRR I more meant it in a sense where this damage is very forgivable there’s this other dude on KZread with a Roban Huey 800 size dude crashed into a pole and it’s clearly a complete write off

@JestRR

8 ай бұрын

@@geovaniboothe1992 if it’s the one I’m thinking of….thats my buddy and something went REALLY wrong.