I love what you’re doing it’s so clean and so inspiring for my diy project!

Super clean! I built the stand, for my 120gal out of wood. But I did consider 80/20 as well. My next tank will be an 8' long build and I'll probably go with an 80/20 stand for that.

Very detailed and well planned. Great job. Wish I was that detailed

@JoesCoralReef

6 жыл бұрын

JB Hale Thank You

Looks dam good man wow

Looks amazing! Planning a similar build. Doser shelf is in the plans but might have to copy your electrical box/area!

Amazing really.

Very nice. Love the black. I especially like that you added shelf features to the stand. Shows the versatility of 80/20. You had mentioned you designed this on sketchup? Can the design be shared on 3D warehouse?

Nice looking stand. The stand looks strong and well built. My only worry is that the adjustable feet look a little thin. Will look forward to updates :)

@JoesCoralReef

6 жыл бұрын

Cesca's Reef Thank You for the comments. The feet should be ok, they have a load capacity of 5000 Lbs each and the stand has 6 of them. Thanks for the concern.

Just wandered across this, and that stand is WOW. I thought about doing 80/20 for a my new tank (200g), and it gets really pricey once all the fasteners get in there and you add in all the machined parts. Although my biggest concern is having a beautiful stand like this, I want it showing, now covered up with wood. I am curious how do you know how thick to use stuff so you don't get any sagging, or strength issues?

I recommend using AluFab for extrusion, they'll help with design so you don't have to wing it yourself. They do both design and will provide all the extrusion. Better price than 80/20 too

Joe, love your stand. Any idea what profiles would be needed for a stand as follows - 72 inch long, 18 inch wide and 36 inch high. For a 120 gallon aquarium. Thanks

I’ve heard about making these stands over the boring wood or custom stands. Now that i found yours I’m really inspired! I just can’t get an answer on span lengths per different sizes. I’m doing a 240 and going to try and use the build calculator on 80/20 . Net. Anything you would do differently? What were the dimensions for your tank thanks.

How much did this cost you? Great build!

Bad ass build! How did you end up mounting the power bricks to the din rail? Also, where did you get the black wire channel? Or did you paint them? Thanks for all the inspiration and help.

Joe, love the stand. I have been playing with the 80/20 sight. but can you tell me what size extrusions you used?

@JoesCoralReef

6 жыл бұрын

Legs and top front and back rails are 25-5050. the side rails on top are 2550 All bottom rails are 2550 all connecting support pieces to hold the wood up in the middle or the electrical stuff is 2525

Great video. Any chance you still have the build sheet and can share it?

Did you mount panels in the actual grove of the extrusion?

How did you attach the back wood panel to the 8020? I'm trying to find efficient ways to attach the skin to my 8020 frame. Thanks

definitely nice looking stand how did you get the proper measurements that you need to build the stand are you going to do the magnet cover for the front

@JoesCoralReef

6 жыл бұрын

Thanks. I used the dimension tool and cutlist extension in the sketch up app . I have a video on using sketch up. I also made a paper drawing to double check the sizes. If you need help or want me to check a sizes, you can email me at joescoralreef@gmail.com. I plan on using hinged doors.

Wow!! I wish I would have found this when I was trying to figure out an extrusion stand! Top notch work, brother. Do you mind me asking how much this ended up being?

@JoesCoralReef

5 жыл бұрын

Thank You. I don't have an exactly cost, but I believe it was around 1200, ouch

@mnelson10000

5 жыл бұрын

@@JoesCoralReef Worth it!! It's beautiful

So if someone wanted to copy your design, would you have a list of the items you ordered from 8020? Or maybe the SketchUp file? Maybe?

Joe, the stand is awesome! Do you have a detail build thread for the stand? I want to copy yours I am afraid not doing it correctly. Huge thanks

@JoesCoralReef

6 жыл бұрын

Viet Truong I have a material cut sheet and sketch up 3d model. Sketch up is free, I did a video on it. You can send me a email with the sizes I can help make sure it’s correct. I screwed up, made 2 pieces with machine counter bores on wrong side. Sucked I had to order more pieces and wait. Joescoralreef a t. Gmail is my email .

Are the screws and nuts stainless steel?

sorry i just found the conversation below with kendal. question, did you use the 25-5050 for the legs and the rails for the length of the stand then the 1 x 2 for front to back? watching your video it look like the legs connect to the same dimension. thanks for your help

@JoesCoralReef

6 жыл бұрын

The legs are 25-5050 and are used only on the legs. The front and back rail are also 25-5050, however the side sections are 2550. I may have misspoken before about the top rails. I'm almost finished with the stock list, if you send me an email I can forward it to you. joescoralreef at gmail.com

Hey joe. I'm planning to make this kind of stand can you help me get all my measurement and how much it gonna cost on my tank. I'm afraid to order a wrong measurement. Here is Dimensions: 18"L x 30"W x 40"H. And there is one store close to my area that they handle 80/20 product do you think i can ask them to get quote how much? Or they might charge me overpriced?

strong enough for 120g my friend ?

I have a 100 gallon tank sitting in the garage waiting to be set up. I hate the wood stand that it came with. I love the looks of your stand and have been researching 80/20 stands for a long time. How do you like the stand since you have it set up?

@JoesCoralReef

6 жыл бұрын

Absolutely love the stand. The aluminum is nice.

@davidhamma2006

6 жыл бұрын

Joe's Coral Reef is there a way to get a full parts list?

How’s it going man. Any chance you would wanna design a system for myself? Will obviously pay

yeah cuz I need help building a stand for the 12 gallon long I want to know what would be the proper measurements and how much would it cost I wanted to be at least 4 feet tall tank Dimensions: 35.4" x 8.3" x 9.4"

@JoesCoralReef

6 жыл бұрын

I just did a quick estimate on 8020.net. Roughly $250 for the 25mm aluminum and the fasteners. Qty: 4 - 25mm square x 47" - 2 Counter bores in on end Qty: 2 - 25mm square x 35.4 Qty: 2 - 25mm square x 34.43 - 2 Counter bores in both ends Qty: 4 - 25mm square x 6.33 n- 2 Counter bores in both ends 32 - Counter bore fastners. Don't hold me to this, I just did a quick design of a stand.

@freshermanreefer4977

6 жыл бұрын

oh boy I think I might just go with wood

@JoesCoralReef

6 жыл бұрын

Absolutely the more cost-effective solution.

@freshermanreefer4977

6 жыл бұрын

yes yes yes this is right lol but maybe one day I do love the fanciness lol

Is there any way to know or calculate what the stand will support as far as pounds per sq inch?

Looking at building a stand for a 6ft 200....what size is the profile you went with here?

@JoesCoralReef

6 жыл бұрын

kyndal anne Hello, for the legs I went with 2” x 2” , 50 series. The top frame and bottom connections I used 1” x 2” , 2550 series. For a 200 I may add two more 50 series legs.

@phoenixrising4573

6 жыл бұрын

Thank you immensely for that. Having a lot of trouble finding a baseline for where to start, and I at least know what I'm looking at now. Prolly going to have a steel stand built for me, I think 8020 might be a touch to much cash. Have a great friend that's a talented welder

@phoenixrising4573

6 жыл бұрын

although looking at my cut list, I'm coming in at 260 just for the aluminum, That's more reasonable than I thought. 25-5050 is the right part number for the rails and legs correct?

@JoesCoralReef

6 жыл бұрын

Yes, 25-5050 is correct. How are you going to fasten it, brackets or the counter bore hardware? To save a little money I purchased my fasteners from eBay, a guy called t-nuts. If you shop around on eBay, you can find brackets and fasteners cheaper.

@phoenixrising4573

6 жыл бұрын

Actually That's Wht I was just looking at....the brackets from 8020 would be nearly 300$ for the brackets and the t-nuts, a little more than I could afford. All I would need are the standard 20mm corner brackets and tnuts correct? The counter bore is probably a bit more than would be practical on this build for me.

Much better bro if you have put door on in using 15x30 or 20×35 aluminum..

@JoesCoralReef

5 жыл бұрын

Yeah, I had plans for doors, sigh, someday.