Rigging Trees Whole! I HOPE THIS WORKS

Have you ever wanted to see an entire tree rigged? Yes? Then have I got a video for you...
Lowerable Base Anchor Vs. Aerial Rescue - • Lowerable Base Anchor ...

Пікірлер: 146

  • @osagejon8972
    @osagejon8972Ай бұрын

    It was such a nice day working with you Zach. I enjoyed watching it as much as doing it! I thought our job site looked nice and tidy.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Yes, absolutely. You and Ryan put good effort into keeping things orderly down there. Definitely necessary for the a.punt of space available.

  • @mjb4545
    @mjb4545Ай бұрын

    Awesome job brother. Hickories love hanging on and peeling. One trick that helps is to make some kurf cuts on the sides of your notch. This allows only the center part of the hinge to hang on hopefully preventing a peel or barber chair. Also a good practice on white pines, cedar, cottonwood, etc. Also nice call on the grcs!

  • @zaccheus

    @zaccheus

    Ай бұрын

    Yeah, I did that on my wood cuts, I didn't think to do it on the branches. I will next time though.

  • @spelunkerd
    @spelunkerdАй бұрын

    I love the way you explain rationale as you go along. For example the double half hitch method to tie the branch, on so it doesn't swing up at you as the hinge breaks.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thank you, sir! I've honestly found it to be helpful to myself because viewers will often comment when I have something wrong or if there is a better way. It's a symbiotic relationship 😁

  • @ClellWise
    @ClellWiseАй бұрын

    Zach, I never tire of hearing your explanations. Whether or not, (in your mind) it's successful. I mean come on, how would those of us true novices recognize the difference? Looked like an absolute perfect day. thanks for bringing us along. Looking forward to the "sequel".

  • @zaccheus

    @zaccheus

    Ай бұрын

    Haha, that's mighty kind of you to share that perspective, Clell. I do get a little lost in falling short of perfection. Jon often reminds me at the end of the day that the tree is safely on the ground, and that's what the goal for the day was. I just want the things that don't go perfectly to not go to waste and to be used to their full potential as learning experiences for myself and anyone viewing.

  • @havespurswillclimb
    @havespurswillclimbАй бұрын

    Enjoyed the video. Very nice rigging. GRCS is a really great tool. I have enjoyed watching your progress as a climber over time. Quite the professional now.....kudos. Go to show how things come around when you want to learn and take time to absorb all the knowledge you can.....from others as well as from personal experience.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks man! I've been blessed to learn a lot from yourself and others here in the comment section. I'm glad it's observable

  • @5chris520
    @5chris520Ай бұрын

    Awesome job. That was cool how you done the pin oak. I cant wait to see the bottom log being felled, to see what you have made. You make cool stuff so its untelling what we are in for.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Haha thanks man, that will be next weekend's video!

  • @Dred13657
    @Dred13657Ай бұрын

    Very nice job my friend. Gotta love the way hickory holds on, but so fragile when dead

  • @Billster1955
    @Billster1955Ай бұрын

    Thanks for sharing, Zach. Excellent video of a well executed removal. Blessings, brother.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks, Bill!

  • @HYDETREEWORKS
    @HYDETREEWORKSАй бұрын

    Shagbark is so tough. Makes the chain sound like its running through gravel

  • @zaccheus

    @zaccheus

    Ай бұрын

    Haha it felt like it was! I'm glad they're not popular landscape trees. Ropes got stuck everywhere, groundies were constantly dodging falling bark, etc. It was nice to work a strong tree, but it was different for sure

  • @HYDETREEWORKS

    @HYDETREEWORKS

    Ай бұрын

    @@zaccheus yeah a big pain to try to pull ropes through spots with the bark the way it is

  • @zaccheus

    @zaccheus

    Ай бұрын

    @HYDETREEWORKS absolutely!

  • @CoolGen10
    @CoolGen10Ай бұрын

    How did you sent over to that pin oak? It looked quite far away.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Just had Jon pull me over. It was too far to jump 😅

  • @michaelnewman-ds3fr
    @michaelnewman-ds3frАй бұрын

    Thank you Zack for your videos I always learn something from you! I’ve been pretty busy lately so I don’t always get to watch but I do every chance I get! Keep up the good work!

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks for sharing, Michael! I know what you mean, I wasn't even able to get a video out last weekend because I've just been so busy with the season getting started.

  • @austinsmith3749
    @austinsmith3749Ай бұрын

    Another great video man love watching you climb appreciate you explaining everything as well. Nice work! Look forward to the next one.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks, Austin!

  • @robertvannicolo4435
    @robertvannicolo4435Ай бұрын

    Zach, excellent job as usual, hickory, especially shag bark, will hold on to the very last strand of wood. Especially when sap is flowing up in spring, always have a sharp, fast cutting saw. Or you end up getting called Rippy Van Winkle. I have cut wind damaged hickory and white oak that entire top folded over and only held on by a few stands of wood.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Haha, based on this experience, I can't agree more. I shpukd have .Abe switch out to the 201 to see how it compared.

  • @robertthompson9455
    @robertthompson9455Ай бұрын

    Make a V cut and then your back cut. You can get by with a straight front cut then a back cut if the limb is fairly small and perpiedicular to the trunk...

  • @deadmanswife3625
    @deadmanswife3625Ай бұрын

    Good morning yes very nice out there this morning I got a couple hours in working in the garden. Now it's off to church well after I finish watching this video😂

  • @zaccheus

    @zaccheus

    Ай бұрын

    Haha good morning, Wendy. It's about to be a beautiful day. I hope you have a blessed experience at church 😂

  • @deadmanswife3625

    @deadmanswife3625

    Ай бұрын

    @@zaccheus 🙏ty❤

  • @Kevin.L_
    @Kevin.L_Ай бұрын

    Good job. I like the way you work.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks Kevin!

  • @gregbrown9271
    @gregbrown9271Ай бұрын

    Very nice work and your talk thru is excellent 👏 👍

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks Greg!

  • @ianbarnett6027
    @ianbarnett602723 күн бұрын

    Great video. Thanks.

  • @dankotos61
    @dankotos61Ай бұрын

    Good job man. It's nice when you can take your time and work on a tree

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks man. Took me awhile to figure it out, but accidents only ever happen when everyone is in a rush.

  • @alotl1kevegas860
    @alotl1kevegas860Ай бұрын

    It's a good day when Zack uploads a tree video. The ISC Ultralink is similar to the Notch Quickie, with a pulley on it. It's pretty cool. They had a recall shortly after they came out. But it's been a bit, and I'm sure they have it sorted out by now. Might be worth a look. Climb safe.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Aw, thanks, man 😊 I remember when that thing came out and I was so excited to get one and then they all got recalled. I think there was maybe a second recall after the first which made me pretty hesitant to throw $70 at it. I might still get one. Maybe if I see it on sale or on black Friday or something.

  • @alotl1kevegas860

    @alotl1kevegas860

    Ай бұрын

    @@zaccheus I wasn't aware of the second recall. Yikes 😬.

  • @zaccheus

    @zaccheus

    Ай бұрын

    @alotl1kevegas860 I'm not sure what it was about I heard about it from others, so it might not have been a big deal. Might have even been a result of miscommunication 😬

  • @alotl1kevegas860

    @alotl1kevegas860

    Ай бұрын

    @@zaccheus It was just the 1 recall. It was a certain batch made at the beginning of 2023 that effected both models. I would think they're good to go if you get one now. ISC makes some pretty bomber gear. Their blocks have some of the highest mbs ratings.

  • @bioniclife
    @bioniclifeАй бұрын

    I've heard shagbark hickory holds dirt that is blown around, in it's bark and dulls the saw. Is that something you've noticed? Hickory is one tough tree! It didn't want to give up its branches.

  • @zaccheus

    @zaccheus

    Ай бұрын

    I haven't cut enlught to say I've experienced that. It sounds pretty plausible. I certainly wouldn't be suprised. It's also so tough that it makes any saw that was cutting spruce just fine the day before fell a little dull 😂

  • @bioniclife

    @bioniclife

    Ай бұрын

    @@zaccheus LOL!

  • @thetreeguy4611
    @thetreeguy4611Ай бұрын

    loven the oll shaggy bark

  • @sx-mt-fd
    @sx-mt-fdАй бұрын

    Quad lock carabiner is what I use for a canopy anchor

  • @josiah513
    @josiah513Ай бұрын

    Nice vid! Gotta love the GCRS! Makes me want one soo bad haha.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks, Josiah! The GRCS is the best tool in my toolbox for sure. Definitely also the most expensive 😅

  • @kingofcam1137
    @kingofcam1137Ай бұрын

    An alternative to the quickie is a pinto or smaller pulley with a carabiner that goes through the the alpine loop and the carabiner can also go over the climbing side which means no side loading on the carabiner bc of the pulley

  • @zaccheus

    @zaccheus

    Ай бұрын

    I believe dmm has determined that the pintobis.notvapprovef for that set up

  • @kyleboman6
    @kyleboman6Ай бұрын

    You also need to make sure the slick pin is on the static side of the rope. Opposite of what you have that way movement can’t accidentally open it

  • @zaccheus

    @zaccheus

    Ай бұрын

    That's something I haven't heard before. Thanks for sharing. I have to argue that I think that's a pretty minor detail beciase it take 700lb to shear the barbs off of the slic pin and I don't think that much force could be applied by movement is the pin is pointed the correct direction. That being said, there is no real reason to not do as you mentioned, and what can happen is not limited to my imagination, so I'll start setting it up like you mentioned.

  • @toddjacks8288
    @toddjacks8288Ай бұрын

    Awesome job brother

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks Todd!

  • @bobaverage
    @bobaverageАй бұрын

    Hey again Zach. I haven't used it as I took use a quickie at the moment (but I'm not too trusting of it due to others stories of issues). But there is an alternative it's the ISC Ultra Link. Incorporates a pulley too to help retrieve (although there is a video here somewhere that shows it likes to twist a bit, and without adding a biner to act as a fairlead the pulley doesn't always engage).

  • @zaccheus

    @zaccheus

    Ай бұрын

    I have heard of it. When it was coming out I was super excited to get my hands on one. Then they got recalled and redesigned and then recalled again and that kinda killed my interested in getting one. I might still if I see it on sale somewhere. As I recalled, they're rated for life support across the minor axis.

  • @bobaverage

    @bobaverage

    Ай бұрын

    @@zaccheus Agreed. I saw the recalls, I'm assuming it's now sorted. Looks readily available here in the UK.

  • @GoLongboardBroseph
    @GoLongboardBrosephАй бұрын

    Well done man, that grcs sure saves in some situations ;)

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks, man! It really does save some time. It's rare that it's the only solution to a problem, but it's quite common that it's the fastest solution to a problem.

  • @Sethhaun78
    @Sethhaun78Ай бұрын

    I love shaggy barks

  • @jonkeith2624
    @jonkeith2624Ай бұрын

    I have done a lot of hickory trees and I have learned that some just hang on more then overs and there no real way to tell which one will and not over then you have to pay attention to what it doing and always plan for a peel then don’t really barber chair to much more of a peel only thing I would do is make your cuts more off the trunk of the tree and make big deep notch’s

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks for those pointers! I did start making wider notches, under Jon's advisement, and that seemed to help a little bit. I have a bad habit of making them too narrow.

  • @loganshamblin4935
    @loganshamblin4935Ай бұрын

    There is a piece of kit from ISC called the ultralink that functions very similar to the quickie. Give it a try.

  • @zaccheus

    @zaccheus

    Ай бұрын

    I was super excited when it came out, but then the recalls kinda killed my excitement. I might pick one up if I ever see them on sale. I really like that that are rated fir life support across the minor axis.

  • @wvboy0311
    @wvboy0311Ай бұрын

    Those hickorys are usaully a pain because of the bark when trying to flip line up the tree

  • @zaccheus

    @zaccheus

    Ай бұрын

    Yeah, I struggled with the flip line and the ropes getting caught all day 🙄

  • @hillsidetreeservice6973
    @hillsidetreeservice6973Ай бұрын

    You can land any length of log flat by adjusting your knotch within reason base of the 1/5 but outside of that is doable but opening or closing the knotch

  • @zaccheus

    @zaccheus

    Ай бұрын

    Yes, that is true. Notch angle can affect angular acceleration, but it's range of effectiveness is a lot narrower than adjusting the length of the piece. Fiber quality also plays a big part a part in things, and this hickory was outside of my experience as far as that was concerned 😅

  • @richardf9137

    @richardf9137

    Ай бұрын

    @@zaccheusAs well as how the Groundman yanks on it!

  • @zaccheus

    @zaccheus

    Ай бұрын

    @richardf9137 Haha, that is an excellent point, too! That's a variable thats really hard to keep consistent and account for.

  • @kyleboman6
    @kyleboman6Ай бұрын

    Use kerf cuts on the sides below your face cut and it will break fine

  • @michaelwhiteoldtimer7648
    @michaelwhiteoldtimer7648Ай бұрын

    Great job

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks Michael!

  • @HansvanOostende
    @HansvanOostende20 күн бұрын

    Perfect Job

  • @zaccheus

    @zaccheus

    17 күн бұрын

    Thanks Hans!

  • @TylerKegolis
    @TylerKegolis24 күн бұрын

    Kerf cuts save lives brother! Be safe!

  • @zaccheus

    @zaccheus

    24 күн бұрын

    Haha, no worries, I made them where they were important. Just not on all the limbs, though it might have given me a better experience to do so.

  • @TylerKegolis

    @TylerKegolis

    24 күн бұрын

    @@zaccheus where are you located? We have a decent bit to shag bark hickory here in PA. And a ton of locust where I am at.

  • @zaccheus

    @zaccheus

    24 күн бұрын

    @@TylerKegolis Canton, Ohio. Probably not too far away

  • @Sethhaun78
    @Sethhaun7810 күн бұрын

    What do you hook your big saw to

  • @zaccheus

    @zaccheus

    10 күн бұрын

    I use a big shembiner on my belt. The tether on the saw is a monkey beaver piece that someone at the monkey beaver booth gave me at the TCIA show. The side handle on the 500 sits nicely in that shembiner. It can be awkward if there are things around to catch the bar on, but otherwise I like to hang it that way so it's not as far to lift wverytime I take it off my belt

  • @timtrapp1324
    @timtrapp1324Ай бұрын

    As for the quickie use as a canopy anchor. Is using a triple locking carabiner unacceptable in its place? That's what I use and I'm open to feedback on it (I assume you have a reason for not using one)

  • @zaccheus

    @zaccheus

    Ай бұрын

    Great question. It is an inappropriate use of a carabiner as per every manufacturer out there. They all say it's not okay because it side loads the spine and gate and can cause a failure below the load rating. Petzl says you can do it on large limbs where the larger diameter prevents the biner from being side loaded, but canopy anchors are never on large limbs 🤷‍♂️ I think the chances of failure are fairly low, but they are probably higher than using a quickie or if you want to be even safer, feeding the tail of the rope through the butterfly knot.

  • @JLyons314

    @JLyons314

    Ай бұрын

    I'll use a sling and carabiner for redirects all the time, but stick to the quickie for the main anchor. I never liked the idea of losing sight of the carabiner, and it potentially (however also unlikely) shifting and loading the gate.

  • @br-dj2ti
    @br-dj2tiАй бұрын

    Hey buddy great job as always love seeing you post I hope all is well the block that you used in this video is it only made for 3/4 rope or can you use other ropes as well if so please can you tell me what other sizes thank you God bless

  • @zaccheus

    @zaccheus

    Ай бұрын

    It is the ISC RP057. It is specifically made for 3/4" rope and a 1 1/8" sling. It's rated for way more than I'll ever need to rig, but I like it because of the sheave diameter. Technically, using smaller diameter ropes in bigger blocks mean that the groove in the sheave won't craddle and support the rope the way its supposed to. I do use 5/8" rope in it and a 3/4 sling. Maybe that's wrong 🤷‍♂️😬 I really hope not 😅 I think the bend radius is worth it. If your considering a purchase, I would advise handling one at a show or something as it is surprisingly heavy.

  • @br-dj2ti

    @br-dj2ti

    Ай бұрын

    @@zaccheus I did order the block I did get it in last week I was surprised at how big it was

  • @zaccheus

    @zaccheus

    Ай бұрын

    @br-dj2ti Thats great! Some guys I've worked with call it "the traffic cone" because it's so big 😅

  • @br-dj2ti

    @br-dj2ti

    Ай бұрын

    @@zaccheus I know buddy I open the box up I was like oh my goodness LOL

  • @zaccheus

    @zaccheus

    Ай бұрын

    @@br-dj2ti lol, that's great. One thing is for sure, you'll never break it. Never. 😂

  • @Sethhaun78
    @Sethhaun78Ай бұрын

    I know you like to get to proper bend radius..you can put a ring 💍..next to the block..especially since your negative rigging

  • @zaccheus

    @zaccheus

    Ай бұрын

    Mmm I'm not sure I understand the benefits there. Rings have tighter bend radii yet.

  • @Sethhaun78
    @Sethhaun78Ай бұрын

    😂thats great saying for guys that wont wear helmet s..ive had a few..😮a pencil dropped from high enough will hurt.lol 😂 LOL..was cutting small medium trees of barns had to pull most ofv them grown into thectin roofs .and had limb absolutely crack ne in the head . Im certain wothout my protos on would been real bad.....another while polesawing hit my ledt hand 🖐..ripped it open inside the finger. Vines let limb go..thing just healed took long time ..little ones are worst sometimes..take care

  • @zaccheus

    @zaccheus

    Ай бұрын

    For sure! The small stuff is always the most under estimated

  • @JLMTreeService
    @JLMTreeServiceАй бұрын

    Great video!! Ahhhh good ol hickory... There is no way to stop the peel ... Kurf cuts and it'll still do it sometimes🤣🤣 Great job on rigging the whole tree, we just posted a similar job on our channel on yesterday!! Find your self bored bro, come check it out!!

  • @zaccheus

    @zaccheus

    Ай бұрын

    I should have tried some side cuts on the limbs, I just didn't think of it while I was up there 🤦‍♂️I did it on the wood, but even those hinges held on more than I wanted 😅 I'll have to check it out!

  • @Sethhaun78
    @Sethhaun7810 күн бұрын

    Hickory holds on..always ..gotta cut threw em

  • @zaccheus

    @zaccheus

    10 күн бұрын

    You know, thays what I thought by the end of this. But the video I release most recently was another shagbark on the same property and it broke much easier. I'm not really sure what the different was.

  • @Sethhaun78

    @Sethhaun78

    10 күн бұрын

    Stronger tree..Kevin ham does video about this topic .on s solo removal.job out by a lake..in my experience hickory won't let go.gotta keep saw going all way threw as much as u can..one little fiber depending on season and health of it will hold entire tree tops ..customer has a huge one that fell in feild and the trunk by stum looks incredible the fiber tear from the wind storm is testimonial to power of GOD. It looks like it was chipped then put back together half-way. 3ft bar size spar about 25ft ..however the top left side had Carpenter ants as suspected from previous trees I removed off this old farm land ..the cherry s and silver maples had them..to...very old trees..they has not yet ate therr way to the stump yet bevause of hickory being so hard ..but on the cherries maples they had gotten down to the stump..in winter Carpenter ants go down in the stump base underground..we also have the cicadas back in some areas this year millions of them...the buzzing of saws or equipment they swarm you ..harmlessmostly but very very distracting as they are huge...landing on your head area flipps me out ..we had them real bad few years ago they sat every 17 years or something like that..strange..had ultra sounds ,scans today still haven't gotten better praying 🙏

  • @MrEvanb93
    @MrEvanb93Ай бұрын

    i like my husky battery saw but when it comes to hickory, and oak im taking my gas saw to shredville

  • @zaccheus

    @zaccheus

    Ай бұрын

    Haha fair enough. This little Milwaukee is built different. But the slower chainspeed does make it a different animal. Its an animal in wood though.

  • @Sethhaun78
    @Sethhaun78Ай бұрын

    Out of all the hickory s I removed last couple years ,,,I've never had a shaggy bark.. 🤪

  • @Sethhaun78

    @Sethhaun78

    Ай бұрын

    Beautiful tree ..have Custamer woth a dozen or so in her yard ..it's veery large like 12 acres.i mow the property..took down several big trees about 15 but never got one of those shaggy barks..they drop nuts everywhere..absolutely destroys my blades on zero turn..s

  • @zaccheus

    @zaccheus

    Ай бұрын

    They are really cool trees, but I can definitely see why they're not popular lawn trees 😅

  • @Sethhaun78

    @Sethhaun78

    10 күн бұрын

    ​@@zaccheusthey are the worst on the mowers ..I mow as well and comercial..tge nuts and limbs will dull blades and destroy spindle s belts ..just fixes my bobcat mower..from hickory,,oddly enough I'm sick and customers had one fall in the storm .but can't do it right now .gett8ng Dr, visits tests

  • @zaccheus

    @zaccheus

    10 күн бұрын

    @Sethhaun78 I've been praying for you man, let me know how that turns out.

  • @Sethhaun78

    @Sethhaun78

    10 күн бұрын

    @@zaccheus thank you God bless you ..waiting on results. But nit healing..can barley work couple hours..quite terrified..

  • @Sethhaun78
    @Sethhaun78Ай бұрын

    God bless

  • @hankjordan2602
    @hankjordan2602Ай бұрын

    I would have like to see you swing over there. The video doesn’t show justice it looks like a long was.

  • @zaccheus

    @zaccheus

    Ай бұрын

    Ah, it wasn't anything spectacular, I just had Jon pull me over 😅

  • @harmsfamily420
    @harmsfamily420Ай бұрын

    Always cut the sapwood and it’ll be just fine

  • @zaccheus

    @zaccheus

    Ай бұрын

    That would have helped some of those limbs for sure. I'm not well accustomed to needing that on limbs too much and so I didn't think do it. I should have. Thank you for sharing

  • @thetreeguy4611
    @thetreeguy4611Ай бұрын

    you need to try the husky t536i , I have that from 2014 still going strong on org batteries , I have the newer T540i also but reach for the 536 more often

  • @zaccheus

    @zaccheus

    Ай бұрын

    I think I've ran them both, maybe. It was awhile ago, so I'm not sure. Why do you like the 536 more?

  • @thetreeguy4611

    @thetreeguy4611

    Ай бұрын

    @@zaccheus I'm not sure yet as I said I've had the battery t536 since 2014 maybe even a little earlier, the 540 seems like it has a slightly slower chain speed in the high mode, but it is considered rated, it might be that I've run the t536 so long that I'm comfortable with it

  • @thetreeguy4611

    @thetreeguy4611

    Ай бұрын

    Also if you're into electric saws (not everybody is) the echo DCS 5000 18 INCH is a good contender also, give my 35 / 40 CC saws a run for their money

  • @zaccheus

    @zaccheus

    Ай бұрын

    @@thetreeguy4611 I gotcha, that makes sense

  • @zaccheus

    @zaccheus

    Ай бұрын

    @thetreeguy4611 I think they have their place. I haven't climbed with my 201 since I got this milwaukee. I have the DCS2500 here in box to do some comparison stuff with. Mayne after than I'll do the 5000. Do you think it would compare to the MSA300?

  • @nicolaisvlog8701
    @nicolaisvlog8701Ай бұрын

    u happy im happy

  • @chirla_j
    @chirla_jАй бұрын

    Have you ever tried incorporating a Texas tug with your canopy anchor setup? It's a nice added insurance just in case something were to go wrong with the quicky. It does also help with retrieval on some of those rough bark trees, or multiple redirects. Here is a link for an example: kzread.info/dash/bejne/eIKLt5aqla_Rqpc.html

  • @zaccheus

    @zaccheus

    Ай бұрын

    Yes, I'm familiar with it. The inventor, Chris Coates, showed me himself. Its great for trim climbs and such. Bino there still uses a quickie, but the sweet thing about the TT is that you can use it with just the climbing end of the rope fed through the anchoring butterfly, which would technically be safer than using any hardware in the anchor. I would not use it on a removal. Thanks for sharing that idea here!

  • @chirla_j

    @chirla_j

    Ай бұрын

    @@zaccheus Np brother. Always looking forward to your uploads! Stay safe, cheers!

  • @pekerja27
    @pekerja27Ай бұрын

    😮 sangat berani dan kuat

  • @zaccheus

    @zaccheus

    Ай бұрын

    Thanks!

  • @small-town-southern-man3573
    @small-town-southern-man3573Ай бұрын

    After trying rigging rings, I seldom pull the block out any more.

  • @zaccheus

    @zaccheus

    Ай бұрын

    I know some folks love them, and I see why. They add a little more risk to the system than I prefer to tolerate. The certainly work, it's just that 1 time out of a million that I don't want to experience. That being said, I still use them for low load applications and double blocking.

  • @small-town-southern-man3573

    @small-town-southern-man3573

    Ай бұрын

    @@zaccheus What risk are you referring to? I’ve rigged out 750#-800# chunks on them. The only downside I see is reduced rope life, but when rigging heavy wood, a rope needs to be cycled out more frequently anyway.

  • @zaccheus

    @zaccheus

    Ай бұрын

    @small-town-southern-man3573 just bend radius and unmonitored heat development. I'm not advocating that nobody should use them. I just prefer a block and the amount of extra effort is minimal for me.

  • @small-town-southern-man3573

    @small-town-southern-man3573

    Ай бұрын

    @@zaccheus Gotcha. Having blocked down many a trunk over the last 38 years, the ease of moving/repositioning a Bend Right ring on an ultra sling down after each cut shines brightly over moving a big block! 😁 I enjoy your videos! Keep it up!

  • @zaccheus

    @zaccheus

    Ай бұрын

    @small-town-southern-man3573 For sure, the bend rite ring definitely has a better radius too. I think it's 4:1 for everything up to 9/16 as I recall. And if you're moving it constantly, you can keep a eye on how hot it gets.

  • @Sethhaun78
    @Sethhaun78Ай бұрын

    Nice work...just use delta link boss..

  • @zaccheus

    @zaccheus

    Ай бұрын

    The screw gate style? I think they have to be wrench tightened to be acceptable for lift support. I don't really wanna carry a wrench. That is something I neglected to mention as a comparable piece to the quickie. Thanks for sharing the thought!

  • @Sethhaun78

    @Sethhaun78

    Ай бұрын

    @@zaccheus Patrick brandit.uses them all the time..he doesent use spikes.but is a climber does cat rescue and I believe was the first along with mumford to test the rope wrench on the zigzag he uses delta links you don't need wrench..

  • @Sethhaun78

    @Sethhaun78

    Ай бұрын

    @@zaccheus I may have miss spelled last name..but he's longtime in the climb industry..I learned about the links from his videos..he uses them on spar s climbing without spurs.useing links and straps for foot holds..quite interesting

  • @Sethhaun78

    @Sethhaun78

    Ай бұрын

    @@zaccheus being honest rather have something screws than those pins ..I bought some delta links big and small..bevause after trying the quickie for me it's hard to open and don't realy trust pins ..becreal difficult for link to unscrew has many threads ..stay safe

  • @zaccheus

    @zaccheus

    Ай бұрын

    @Sethhaun78 That's mighty cool. Spikless climbing definitely requires more creativity than spike climbing. I can totally see using delta links for non life support applications, thats makes plenty of sense. I don't love the quickie myself. I was really hoping the ultra link would turn out to be something better than it did. I don't want to have my life supported by a finger tight screw gate just like I wouldn't want to drive a car with finger tight bolts hold the brakes on.