Richard Raffan turns a disc vase for the 17th. 4-Ways project
A disc vase is an interesting project that presents many design opportunities and technical challenges. This is the 17th. 4-Ways projects, so be sure to take a look at the three other approaches to designing and making a disc vase.
Tomislav - • Disc Flower Vase With ...
Sam - • Disk-shaped Bud Vase--...
Mike - • Multi Axis Disc Flower...
4-WAYS comprises Sam Angelo, Mike Peace, Richard Raffan, and Tomislav Tomašić who suggested that having a few turners publish their approach to one project on KZread at the same time should be interesting. 4-WAYS publish after noon on the first of each month US time, which is evening in Europe. For Australasians it’ll be the 2nd. morning of each month. Each video has links to the others.
Пікірлер: 68
Gorgeous, exceptional grain choices.
Well done Richard, I did watch the other three, and my comment to you Richard is, “you are the master of the master woodturners”.
@Penqueen2010
5 күн бұрын
I totally agree with you 💯 %
Yours is the final video of the four that I've watched. Each one of you took a different approach and provided very interesting design ideas as well as demonstrated very useful techniques. I like the narrow shape and large disk on this piece. The figure in that juniper is really quite beautiful. These 4 ways projects really do inspire ideas and show the different approaches different turners take to the same general project. Thanks again to all four of you for doing these videos. It's kind of hard to wrap one's mind around the fact that we are heading into the hottest part of our year while you are heading into the coldest; it's been interesting watching your recent videos where your shop attire has become more adapted to cold weather.
That wood was shockingly beautiful
Awsome job Richard, wood is amazing and you did it all on the lathe.... Now I need to make one disc upright
You demonstrated that there are lots of ways to solve turning problems, Richard. Beautiful end result.
@RichardRaffanwoodturning
7 күн бұрын
I learnt a lot attacking this project, Mike. Now I'm thinking I think I'll do a series of disc vase variations.
@sec9676
6 күн бұрын
@@RichardRaffanwoodturning Please do!
Quite a challenging turning! Your descriptive comments come out as thought processes, so valuable to the listener, thanks for sharing those since we learn how to address several problems. Quite an impressive turning lesson. Thanks
Wouldn’t be finished if we don’t see a sock! Nice project. I have drilled a disk on side using 2 of the four jaws on my chuck to drive the disk before turning the face ( did leave marks but held it well)
A beautiful disk vase. I so enjoy watching how the 4 of you come up with these and your various approaches to solving the problem at hand. Thank you very much.
Very nice. The turning between centers and the layout process was good to see.
I watched all four of these videos last evening. I was actually nervous! Please take this as a compliment because I was so drawn in by the process. Well done, gentlemen.
Thanks once again Richard. I do so look forward to seeing you 4 guys sharing your skills.
I enjoyed watching you do nearly everything on the lathe. You've got to make it work with the tools you have. The grain pattern did look like a landscape. I'm glad you saved it all.
Very nice, the wood is beautiful off to see the other three. Thanks.
I quite enjoyed that one, well done.
Beautiful piece Sir.
Lovely job Richard, glad you found some Jonquils in your winter garden. Deceptively simple looking piece, very complex in the execution. Looked great.
Thank You Richard!
@RichardRaffanwoodturning
19 сағат бұрын
And thank you.
I very much enjoy these 4ways videos 😁
Man! I learned a ton from this one! I can't wait to try it! I might marry Tomisalv's inlay with your design concept! That was the best half hour of my day! Thank you!
@RichardRaffanwoodturning
7 күн бұрын
Go for it, but use a thicker blank so you end up with a wider base. This one is now on a small round base so it can't fall over.
The timber is beautifully presented
Very nice, well done Richard. Beautifully simple.
Thanks, Richard!
nice, wood looks like cedar we have here, looks cold down there
Always enjoy watching you get to a finished piece, especially with difficulties experienced along the way. A unique vase with remarkable grain. Well done, sir.
Always enjoy seeing how the four of you approach the design and techniques for your projects, well done
An interesting solution to the project proposal . I would have kept the bit of sapwood as a design feature for the top . An idea , turn another disk as a base and dowel them together
@RichardRaffanwoodturning
19 сағат бұрын
This vase now has a small disk for a base so there's no chanceof it being blown or knocked over.
Always a joy to learn from you!
Very lovely piece. Keep up the amazing work. 👽
Very nice vase Richard. Elegant shape and beautiful wood. You had me a bit worried while you were flattening the base though. Thank you for sharing. Have a great day and stay safe.🙂🙂
Very nice bub vase , everytime I watch your video I learn someting new
Now THAT's thinking outside the vase...
A beautiful object, and many problems overcome. I do love the differing ways in which you four approach each project. That's Virginia juniper/Red Cedar? Everything is better with Sock. ;-) thanks for another educational and entertaining video.
@RichardRaffanwoodturning
6 күн бұрын
Juniper
👏🏻👏🏻👏🏻👏🏻👏🏻
A lovely piece of wood.
Thanks Richard i will give this a try I have a block of eastern cedar that will do.
@johnmitchell1614
7 күн бұрын
Why bother?
@josephpotterf9459
7 күн бұрын
@@johnmitchell1614 Because I like trying new things on the lathe . why are you here?
@RichardRaffanwoodturning
7 күн бұрын
@@johnmitchell1614 That's unnecessary. Come to that, why did you bother turning the vase you use as a thumbnail.
After your anouncement, what you are going to do i was wondering how you will drill the hole, i was thinking about how you attach it under the drill press, or if you are trying to do it on a flat surface. or which kind of jig you are going to put together....... 🙂and then you did the whole thing on the lathe, i am a newbie and was really surprised! Well done and a lot to see and learn for me! Thank you very much!
Hello can you tell me the type of wood this is sorry didn't catch it stunning end product as always it a pleasure to watch you make everything you do look easy Thanks Jamie
@RichardRaffanwoodturning
18 сағат бұрын
Juniper
@jamiemitchell5132
17 сағат бұрын
@@RichardRaffanwoodturning thanks for letting me know I will be on the hunt for some just a stunning look to it cheers
It's not hard to see why it's been a while. You need the heart of a Bengal tiger for that caper. Thanks for posting.
Hello again Richard - Do you prefer a Spindle gouge or Bowl gouge for roughing out and what sizes in millimeters? Phil
@RichardRaffanwoodturning
19 сағат бұрын
It depends what I'm roughing out and the scale. Since 1970 I’ve used spindle gouges for turning bowl profiles. You don’t need the strength of a deep/fluted bowl gouge working close to the rest, so using a less expensive tool when the cut is close to the rest makes sense, at least to me. You see this in most of my videos, and that I generally use bowl gouges when hollowing bowls. Here I go through my essential tools: kzread.info/dash/bejne/o3Wuk6ifcdfXnag.html
@PhilStevensphilongold
11 сағат бұрын
@@RichardRaffanwoodturning Thanks Richard - I will check out the video you mentioned. Cheers. Phil
@PhilStevensphilongold
11 сағат бұрын
@@RichardRaffanwoodturning I wondered if you would know where I can buy Burr woods from in the UK? I know you don't live here anymore, but you might have some contacs still. Thanks. Phil
@RichardRaffanwoodturning
7 сағат бұрын
@@PhilStevensphilongold I've been in Australia since 1982 so I've absolutely no idea where you might go in the UK for timber. I do know the small local sawmills from whom I purchased ash logs are long gone.
@PhilStevensphilongold
7 сағат бұрын
@@RichardRaffanwoodturning Thanks Richard - I didn't realise you had been in Az so long. I will keep making enquiries. Phil
Hi, a really interesting project and it turned out really nicely. BTW, you often mention you have downsized your equipment. Do you have video of your previous shed prior to downsizing? Just interested what you had before.
@RichardRaffanwoodturning
7 күн бұрын
When working full-time as a professional turner, I had three Vicmarc VL300s (two short-bed, one long-bed), three Vicmarc VL100s for teaching workshops away from home, a bandsaw, tablesaw, drill press, and a chainsaw. I've no photos or videos of my previous workshops.
@LAZZY0001
2 күн бұрын
@@RichardRaffanwoodturningThank you for your reply Mr Raffan. I really enjoy learning from your videos.
Hello Richard, forgive me for saying but that seems like a pretty hair brained idea. The thing is inherently unstable and will spend a lot of it's time on it's side. It needs three or four feet to support it no? You made a good stab at it though. Did the juniper have a particular smell?
@RichardRaffanwoodturning
7 күн бұрын
I couldn't agee more regards the concept, but it's a popular woodturning project and I was happy to rise to Mike's challenge. If I'd had a slightly thicker blank with interesting grain, I can assure you I'd have used it. As it is, this vase now has a small round base and there's no chance of it being knocked or blown over.
Was this a challenge in which you were limited to only use one power tool "lathe" to make your project ?
@RichardRaffanwoodturning
7 күн бұрын
4-Ways aims to show four different approaches to the same woodturning project. Had my blank parallel faces I could have taken a different approach. As it was, this seemed the best approach using the tools I have.
Not sure why you wouldn't just use a bandsaw to cut the top and bottom.
@RichardRaffanwoodturning
7 күн бұрын
I regard cutting a disc with curved faces on any saw as sheer stupidity and an accident waiting to happen. I did consider cutting a flat on the original blank, but that raised a host of other issues including dealing with vibration and aligning the hole. Sanding would be a better solution, but the whole point of the 4-Way series is to show a range of different ways of doing stuff in different situations.
Hmm, better put it up on the mantle where the cat can't get to it.
@RichardRaffanwoodturning
7 күн бұрын
It's now got a small round base.