thank you for the tutorial! the length of the video is not too long and the tutorial is easy to follow. keep the tutorials coming please! :)

Your tutorials is great! Thanks for posting and sharing it!

love this. give us more! you're great

Love it man thanks please do more you are the only person that is easy to understand what you are doing amazing man thanks

You are just amazing, thank you 1000 times

Very thorough and easy to follow and understand. Thank you.

Hey! Awesome tutorial, thanks so much! Please keep on making these great vids!

Great tutorials!! keep posting! your methods are very good! super easy to understand!

thankyou sir... this video is very helpful in learning rhino......... pls keep posting such videos...!!! god bless you

Thanks for your tutorial. I just get a problem after ExtrudeCrv that some of the pieces with thickness are not in solid. I just try to use cap-fail, planarcrv on both side-fail(seems like the curve is in segments), even patch-fail. But one of their surface is created by curve boolean, others can not. Is there any suggestion to fix the trouble?

This is such a helpful video! Thank you so much for this tutorial :)

Incredibly helpful, hope you to upload more of these...

I have imported cad 2D outline plan on rhino and am trying the same. After rebuild I am unable to play with the control lines along z axis

Nice work man....rhino tutorial from an Indian......great goin' good job.

hi thank u for the video .... but why is my being extruded in horizontal direction at the end @14.42

Helpful tutorial how would you continue the waffle of the vertical tube, ( so the contours continue till the ground) .Thank you

This is AMAZING! Well done bro!

when I blend surafe the two surfaces he selects a single edge ?????

Man thanks a lot for this very useful tuto ! I just got a little issue.. after triming the circles onto the surface the curves appeared segmented so impossible to loft or blend. Can someone help ?

So, my friend, i study architecture and i really really want to say thank you for this awesome tutorial. Really really useful. I'm definately going to use these technics in one of my projects. Thanks

@abdullahten1308

5 жыл бұрын

Ntua ? :D

@ioantis_

5 жыл бұрын

Nope, University of Patras

how did you join the curves after contour?

Great tutorial! helped me to build the model so quickly

This was very helpful ! Well done explained ! Thank you !

You've just saved our uni project. Thank you for this tutorial

@formforge

7 жыл бұрын

+Harrison I am glad... you can contact me for any further help!

How to obtain the CNC cutting planes of each of the panels?

Great work! Will be following you!

control points were not showing when selecting and hitting enter of the curve plz can you solve it

Damn! Best tutorial ever, thanks :)

thankyouuuuuuuuuuuuu sooo much for this you are life saver

Great video. Anyone who is having the problem of not everywhere being solid, make sure you JOIN the surfaces instead of GROUP. A simple command which makes a huge difference.

@himanshuadnani7440

4 жыл бұрын

i am unable to join rhino 6

@himanshuadnani7440

4 жыл бұрын

if any one else is unable to join the curves just cap them after extrusion you will get same result

You'r really helpfull guy. I'm thankful to you very much.

good one and very well explained....since i am new with this software could you do a video on all the tools relevant to architecture modelling, like 2d documentation, 3d model building, rendering etc to make your channel one stop point , i know its lot to ask but if you could it would be very helpful. and off course will wait for your next video

Where were you when I had to do this last spring! it took me hours to figure out :/ Im glad this is here now. Such a good workflow.

@formforge

7 жыл бұрын

Daniel Rodriguez thankyou. next time send in your quarries, let's make something more interesting

Amazing Tutorial!!!! thankyou

I like your turorials. Very helpful but please use an exterenal mic of better quality. The quality and level of sound is very poor and low. Thank you for posting though ;)

@formforge

6 жыл бұрын

sorry about audio quality, will take care next time

you're a legend man!

this video saved my life 😌

This tutorial is awesome! I’m just having a bit of an issue when offsetting the surface. There are some parts in which it doesn’t offset and I can’t work out what the issue is.

@formforge

5 жыл бұрын

My guess is the curvature of surface you have bent is more then offset distance.

ı wanna say to thanks u for ur presentation, ı am a architecture student and our teachers are so interested in rhino and they want to see modelling our projects on rhino so this video is incredibly beneficial

@formforge

4 жыл бұрын

Thankyou ;)

I like your tutorials very much..

brilliant！thats what i want. u make it in a simple way，without using grasshopper. great

it was really helpful thank you so much

This was very helpfull, thank you!

The sound is low !!

It would be nice if the like was clear enough to understand anyways thankyou it's a great help

Very very nice! Well done!

Best tutorial ever

OMG! Thank you SO MUCH!

thank you!!!! you help us so so much

thank you ! great an easy to follow

Abhinav bhai thanks bt next time volume thoda high

Doctor says my hearing was ok, then I show him this video. ;) Thank you though!

@formforge

4 жыл бұрын

This video is for Audiophiles ;)

Hi, Abhinav Goyal love this video very helpful! Just wondering how I would make this into a laser cut flat file, is there a particular way to do this?? would love to find out :))

Great one Dear like sixer in cricket.

awesome tutorial! thank you

AMAZING TUTORIAL... THANKS A LOT

first thanks for video :) and when you click on ellipse or circle arrows appear but when i click on those arrow things doesnt appear do u have any idea about it ?

@formforge

7 жыл бұрын

+Oğuzhan Gür this is bit unusual. Make sure your gumball is on. If you can send me a small videoclip of this may be I could help.

thank you at all really great work. i would build simply wood estructures to all my proyects thanks!

Great Tutorial! Thank You...

Hi Sir, I have encountered a situation where there is no isocurve shown in the TOP view that makes me could not trim the line within the eclipse. May I know what the problem is?

@patty15631

5 жыл бұрын

I could not trim the surface within the elipse and can't figure out why either.

Great tutorial, thanks!

enormous thank you!! :)

So helpful! Thanks a lot!

Superb bro, thank you

pls share the files thankyou

Really useful, thank you!

like it! so great~very helpful :D

Very helpful . Thank you for the hard work. Just a small comment tho. Get a better mic cuz it was so hard for me listening to your voice.

Thank you very much!

CAN'T HEAR YOU! SPEAK LOUDER PLEASE!

Excellent!

When I do the Rebuild command, after I click OK all the control points disappear without giving me the chance to rebuild the surface. How do I fix this issue?

@formforge

4 жыл бұрын

Hi. Try to explode surface before rebuilding it.

Thank you so much!!!

great tutorial..but I have this problem that I am not able to join the contour lines and group them ..when I press the command join the selection goes off? I tried to see the command in the video..it doesn't show anything? could you suggest where is the problem

@formforge

6 жыл бұрын

Group them right when you make contour so it can be selected later all together.

@_inan_

Жыл бұрын

had the same problem. grouping worked though

bro thank u so much for ur effort in this video...but I have a problem with making contour..when I implement the contour tool I had some empty surface and some of them are solid ..what is the problem ?? u know ??

@formforge

7 жыл бұрын

Hi, It happens when the geometry or object is not clean. you have to be careful then you are blending two different surfaces. add cross sections if you have to. the resultant surface should not overlap or have any gap. you can to a surface check surface>edgetools>showedges for poly-surface objects.

@furkankon8679

7 жыл бұрын

thank u so much bro ..I will check it :)

@furkankon8679

7 жыл бұрын

can u send to me your model file..if you have it I could not find my mistakes??? furkankon@gmail.com

@formforge

7 жыл бұрын

It will be better if you mail me your file at abhinav@formforge.co if will check it for errors

Great tutorial! Can you please increase the volume of the video, I can barely hear you.

@formforge

7 жыл бұрын

C Ford sorry man that's how it got recorded. best you can plug your ear phones in, will be lot better.

@formforge

6 жыл бұрын

sorry about audio quality, will take care next time

was great to know first

Thank you so much you make it like a piece of Waffle

can't hear you.

Actualy ı cant not hear you nevertheless you are perfect for me . thank you so much. please continuation

amazing!!!!

Thank you so much

owesome job thanks

Amazed

Thank you!

Thx a lot very helpful

hello, I cannot offset my surace for some reason

@formforge

4 жыл бұрын

Try rebuilding it.

THANK YOU

Hi it is easy to design, but is it feasible, please let me know thanks.

@formforge

5 жыл бұрын

zenkyumaestro.blogspot.com/2012/10/sevillas-gigantic-new-waffle-in-sky.html?m=1 This is a real example. This tutorial does not cover the engineering aspect of it. That depends on scale and budget of the project.

awesome

Hello and thank you for great tutorial,just please make sure your other videos the sound quality is better )) ,my Volume is the top notch and barely can hear you. good Video thanks

@formforge

6 жыл бұрын

sorry about audio quality, will take care next time

Can't hear your voice properly! :'(you make lovelyy videos, but pleasee pleasee tryy using a mic, you werent audible ag all :'(

amazing

This was super helpful. Turning up the gain on the mic would make it easier to hear, but the lesson was well done.

@formforge

6 жыл бұрын

sorry about audio quality, will take care next time

Bro please upload other video and work other

Eres el mejor

Like liền cho bạn hiền nhé

Thanks for video

thnk you

hello i m nt getting that arrow u have with arrow of green yellow blue hw to get

@formforge

6 жыл бұрын

sanjeev krishnan find gumball button(where osnap is)

@sanjeevkrishnan4587

6 жыл бұрын

tq sir