Thank you for your video!!! I can express ideas in Rhino more than better before!!! awesome.

thank u man i liked your works its fantastic ,it help me to learn the rhino

Really useful! thanks very much!

Amazing! More tutorials for grasshopper, please!

Great tutorial as always,very well done,👍🏻

@AdamArchh

Жыл бұрын

Thank you

thank you so much for useful video

Adam，my GOD！

thank you so much for this tutorial.

@AdamArchh

Жыл бұрын

Thank you for support

Great!!, thanks a lot for sharing!!

@AdamArchh

Жыл бұрын

Thank you for support

Great job Adam 👍

@AdamArchh

Жыл бұрын

Thank you

Greate, awesome. thanks

TIP 1 > Never delete your curves. [1] They take up no space (just put them on a separate layer and turn off!) [2] You might need to make change, so you'll save time and accuracy by not rebuilding them. . TIP 2 > When you repeat a command, your narrator-bot does not mention what is happening. If you are OUTSIDE of a command, then by hitting spacebar, enter, or RMB you will repeat the very last command.

@AdamArchh

Жыл бұрын

Thank you so much

@barscobanoglu5188

8 ай бұрын

Yoooo. thank you man.... Saved my life

Amazing!

@AdamArchh

Жыл бұрын

Thank you

🔥🔥🔥💖

thank you so much👍

@AdamArchh

Жыл бұрын

Thank you too

This is what I call TUTORIAL!

@AdamArchh

Жыл бұрын

Great

Good teacher 👍👍

@AdamArchh

Жыл бұрын

Thank you for support

good jop

At 3:24, even after setting the z coordinate, the middle three curves are not becoming planar.

@nischalejardar9218

6 ай бұрын

same problem

@abubakarharunayole3300

15 күн бұрын

@@nischalejardar9218 just use dup border > join > patch

Thank you 🌸🌸

@AdamArchh

Жыл бұрын

Thank you too

Şükela!

keren...broo ❤

@AdamArchh

Жыл бұрын

Thank you

diggin it.

Hello Adam, thank you very much for your tutorials. I have a Mac and can't find the "arctic display mode" nor the "vertex selection" option. Do you know why or where are they? Thank you very much.

@AdamArchh

Жыл бұрын

Hi thanks. sorry, i never used a mac

WOOOW ASTONISHING WORK!!! what are your opinons of sketchup? do you prefer Rino? its nice that you have all the built-in components with Rino!

@AdamArchh

Жыл бұрын

Sketchup is a very powerful program, but working with curves is easier in Rhino

@ThatOneArchie

Жыл бұрын

@@AdamArchh how much more difficult is Rhino vs Sketchup? cause I've basically mastered sketchup but never even begun work in Rhino.. but id love to start! ..

@AdamArchh

Жыл бұрын

@@ThatOneArchie SketchUp 3/10 - Rhino 5/10

@randomtux1234

Жыл бұрын

@@ThatOneArchie If you can master Sketchup, you can master Rhino too. It appears a little daunting at first, because of the hundreds of commands/tools but of these i only use 25 commands for literally everything. its also free for 90 days, which is plenty for starters

@user-yk1cw8im4h

Жыл бұрын

@@randomtux1234 just crack it from the get go, no point to use the free trail

Nice tutorial. One question, if I blend surface between two edges I get reversed twist, altough one of the surfaces blended right way, other two did not . Flip command does not work in this case nor I am not able to change the direction other way as well.

@Bohemianism89

Жыл бұрын

I had the same problem. I worked out that which coordinates the surface blends to depends on which half of the curve you select. as in, there is a midpoint along each line. when you start the blend surface and select the first line you will invariably select a point on the line which falls on one side of its midpoint, when you select the next line you are blending, make sure you select side of its mid point you want to blend towards. its difficult to describe but intuitive when you try in.

@khewintonlee1876

Жыл бұрын

@@Bohemianism89 You are a life saver

Nice

@AdamArchh

Жыл бұрын

Thank you

nice

@AdamArchh

Жыл бұрын

Thank you

Are u meshing Saydnaya prison

thank you. I would like to see the next video, how to make windows.

@AdamArchh

8 ай бұрын

Thank you, use the Grasshopper for detailing

Awesome! Would’ve liked to see how you added the mullions to the windows. Was that also done with Rhino or was it Grasshopper?

@AdamArchh

Жыл бұрын

Thanks, since this is just a Rhino tutorial, I only included the part modeled with Rhino in the tutorial. I made the window details with GH,

@ferdipauner8674

Жыл бұрын

@Yabets Jima yes waiting for this...

Are you telling me that i should not learn to use Sketchup ...

@mcmjewellery8573

5 ай бұрын

Yes

Whether it is feet and inches or meters it will be more useful

Hey how did u made the top into planer surface

Hi. Why does it perform the opposite of what is in the training when I use blend surface ?

@AdamArchh

Жыл бұрын

From one of our followers: FutureLuxury - I had the same problem. I worked out that which coordinates the surface blends to depends on which half of the curve you select. as in, there is a midpoint along each line. when you start the blend surface and select the first line you will invariably select a point on the line which falls on one side of its midpoint, when you select the next line you are blending, make sure you select side of its mid point you want to blend towards. its difficult to describe but intuitive when you try in.

@sirousghaffari9556

Жыл бұрын

@@AdamArchh TNX a LOOOOT

Try to do this in Fusion 360 ...

In The setup im from Holland

@AdamArchh

Жыл бұрын

I love the Netherlands. I can't wait to visit.

2:30 at this step when you edit the vertices it edit the hole model but for me it just edit the vertex of the large rectangle ..second the planar surface command not working

@pinoq2216

Жыл бұрын

I mean the lofted area didnt join with the blended surfaces

@pinoq2216

Жыл бұрын

...

@AdamArchh

Жыл бұрын

PlanarSrf only works on planar and fully closed curves. So you have to make all 3 curves planar. If you still can't. Use the EdgeSrf command.

@pviccs

Жыл бұрын

did you figure it out? i'm having the same problem, just the square moves

@anamulhasan6023

Жыл бұрын

same problem

hi, Adam, I can't figure out why the Planarsrf won't work, says "curve must be closed and planar"

@AdamArchh

Жыл бұрын

In the previous stage, we synchronized the points in the z direction with the setpt command (or set xyz coordinate). PlanarSrf won't work if you haven't done this correctly. If you do these and still have problems, use the EdgeSrf command, but you should be aware that the surface is not planar.

@cyz1782

Жыл бұрын

@@AdamArchh I see, I didsetpt command (or set xyz coordinate). but still not working. Thanks very much , I will try the EdgeSrf command

@AdamArchh

Жыл бұрын

Good luck

@randomtux1234

Жыл бұрын

good practice is to set grid units in options and snap to objects on, then your curves are not visually closed and apparently valid, but actually closed and really valid

the last paneling grid that is not in TUT would you plase explain it next time .

@AdamArchh

Жыл бұрын

We add the details at the end with Grasshopper. It was just a Rhino tutorial.

HELLO AT MIN 2:39 when i edit vertex it moves only the selected point the curve did not change how can i fix it ? thank you

@josephelsaaed8887

Жыл бұрын

the loft part and the blendsurface part are not connected

@AdamArchh

Жыл бұрын

Hi, First Right click the Record History Select Always Record History Now model again, problem will be solved

@josephelsaaed8887

Жыл бұрын

@@AdamArchh thank you very much it works

Hi Adam, it won't let me select the vertices and I have selected ctrl and shift, what am I doing wrong?

@delfinamedrano9254

9 ай бұрын

at minute 2:38 it's my problem

Facade???

In scale per minute 1.12 I couldn't do it.

last in the video your model is moving around what's tha command for ?

@AdamArchh

3 ай бұрын

Turntable

@5:28 how did he draw a polyline on surface ?? whenever i tried it`s coming as planer

@AdamArchh

5 ай бұрын

Hi, the line wasn't created on the surface, it was drawn between the curve segment. Since ‘’Project’’ is active, the line you draw is drawn on the CPlane. Disable the project (from the bottom/middle) and draw it.

Why dont you make one part and use polar array with 3 numbers. Even it is good to use flow surface with history on.

@arden4354

6 ай бұрын

Exactly!! I was think the same. I have used polar array instead and got better result. Didn't require to adjust using vertices.

@egyfate

4 ай бұрын

Do you have a tutorial on this please? Cause i have a problem with the vertices step

hey my blend surface command is wrecked i think. The new curved surface is twisted way more than shown in this video. Anyone knows why?

@princemonzzzi2174

11 ай бұрын

nevermind i got the answer from the comments. thanks

@AdamArchh

11 ай бұрын

Good luck

@noormemar9659

8 ай бұрын

@@princemonzzzi2174how did u fix it

!

could we do it with archicad?

@AdamArchh

Жыл бұрын

I don't use Archicad but I think you can do this with any architectural software.

@davidngingpi7052

Жыл бұрын

Im new to rhino and i cant get the crtl shift vertices can u help me adam

@edenassos

Жыл бұрын

You can, but why would you? It's far easier to do anything computational with Rhino and GH and then export the final to Archicad. I'm speaking as an Archicad user myself.

What software is this?

@Share_The_peace

Жыл бұрын

It’s called Rhino

Could you please send me the pictures you are working on?

@AdamArchh

Жыл бұрын

Of course, archdaily.com/794205/prince-bay-marketing-exhibition-centre-aecom/57c39d2ce58ececcfd000409-prince-bay-marketing-exhibition-centre-aecom-plan

是10年前筑土的adam么？😁

@AdamArchh

Жыл бұрын

Designed by: AECOM

Is there an Arabic translation available?

@AdamArchh

Жыл бұрын

Not yet

what is this software ??

@AdamArchh

Жыл бұрын

Rhinoceros 3D

@jeremvfx

Жыл бұрын

@@AdamArchh ok thank you I didnt know about this one

May i know which units you are working sir

@AdamArchh

3 ай бұрын

Units are meters

Why do I all our buildings have to look like fidget spinners or like alien sex toys made out of out of stainless toys? It´s so jarring and hardly ever fits with ever the surrounding cityscape at all

@AdamArchh

Жыл бұрын

The design of the buildings is not ours. You just use these projects to prepare modeling tutorials. We don't know much about sex toys.