RHCSA Exam Autofs Question || What is Autofs and How Does it Work? || RHEL 9
In this lecture, Autofs question in RHCSA exam is covered. Autofs is a service to automatically mount a NFS share at client-side mount point "on demand". It helps to save network and system resources. The NFS share is automatically unmounted when the NFS share is no longer required.
In RHCSA exam you need to configure only the client side.
Subscribe - / dextutor
This lecture is part of the RHCSA exam playlist: • RHCSA Exam Full Course
Other Reference Videos:
1. SSH - • RHCSA Exam SSH topic |...
2. Containers - • RHCSA Exam Container Q...
3. SELinux - • RHCSA SELinux Question...
Tools Required:
1. RHEL environment
Other Playlists:
OS: • Operating System
Operating System Lab playlist: • Operating System Lab
Linux Essential: • Linux Tutorial For Beg...
Was this tutorial about AutoFS in RHCSA helpful? If so, please share. Let me know your thoughts in the comments.
#linux #rhcsa #rhel9 #dextutor #autofs #nfs
Пікірлер: 79
If you get the error clnt_create:RPC: program not registered run the command #systemctl enable --now nfs-server.service
@abdorouiss5279
Ай бұрын
It did not work for me
Dear Sir, I have recently discovered your channel and glad that I've found it in time. I've watched all the videos and they helped me a lot. I have cleared my RHCSA exam with ease. Thanks to you and your videos. Keep up the good work. And if you can please start uploading tutorial of RHCE exam
@dextutor
2 жыл бұрын
Congratulations.. I am glad that the videos were helpful..keep sharing
@dextutor
2 жыл бұрын
Can you share your email or phone number? dextutor@gmail.com
@luvk421
2 жыл бұрын
Hiya nazmul hasan can you please guide a bit about exam
@Gamma_Wale
2 жыл бұрын
Hasan How you book your exam? i am also want to book but some payment issue
@dextutor
Жыл бұрын
Here's a video to your success kzread.info/dash/bejne/k6ic3LKOm9Oyeso.html
Hello. i wrote my exam today, and i cleared with a score of 218. most of the questions i got was from this study guide. Thanks @dextutor
@dextutor
Жыл бұрын
Congratulations
Thanks for the video I was getting clnt create: RPC Program not registered. But after restarting services rpc and nfs I was able to get this working thanks really helps in my prep for RHCSA
Thank you so much for sharing your knowledge
Thank you so much for sharing your knowledge, this has been the best video regarding autofs I have found.
@dextutor
Жыл бұрын
Glad it was helpful!
Sooperb. Very well explained. Please these kind of videos. ❤️❤️❤️
@dextutor
2 жыл бұрын
Thanks
great explanation
Thanks for sharing
Really appreciable content and way of teaching ..
@dextutor
Жыл бұрын
Keep watching
Was waiting for this...thanks
@dextutor
2 жыл бұрын
Most welcome
@pratiksartville5673
2 жыл бұрын
@@dextutor ..sir are questions of same type asked in RHCSA exam??? I am about to appear for the exam by next month
Good stuff man, really appreciate it. I see you have tutorial about shell scripting in the Linux playlist. Are you going to move it to RHCSA playlist? Do you plan to upload more video to RHCSA playlist or it's already finished? Thanks!
@dextutor
2 жыл бұрын
Majority portion is uploaded.. I will move the shell scripting videos here also
Good stuff. very clear instructions . Will there be any questions about indirect mount in Exam?
@dextutor
2 жыл бұрын
Anything can be asked
1 constructive comment, You mounted the NFS "share" on `/auto_mount/access/` and not on `/auto_mount` however, great job!
@diomenezes
Жыл бұрын
how fix?
Sir when i run showmount command it shows but when in the last step when i type ls / it does not show the directory
Configure autofs to make sure after login successfully, it has home directory autofs, which is shared as /rhome/ldapuser40 users can use home directory normally? Plz solve this que
Hi @dextutor All configuration is done. but when I start autofs it creates folder /auto_master but not mount the access folder mapping itself. When I issue the command touch /auto_master/access it creates folder access folder and I can see the mounted files and folder inside it. why not auto create access folder and auto mount the contents inside it? but when I mount manually mount -t nfs :/share /mnt It mounts the filesystem sucessfully. Kindly give some hint what I am doing wrong.
How to save in gnu sir (6.14)
Hello sir, i recently discovered your channel and it's really helpful but I wanted to know if you provide coaching for RHCSA exam preparation? And how can I contact you..
@dextutor
2 жыл бұрын
dextutor@gmail.com
Can I use * instead of access?
On the exam do you need to create the autofs server ? Or just the client ?
@dextutor
Жыл бұрын
Client only
Sir, i can able to go inside /auto_mount/access and did "ls -l" nothing was showing. even Df -th not showing mount point. When i mount manually " mount i.p:/shares /auto_mount/access " then it was showing me in DF -th and i can able to do "ls -l" and i can able to write and view. Why it so after manual mounting?
@najibahammouda2830
2 жыл бұрын
The same problem !! i'm waiting for a reponse plz
@dextutor
2 жыл бұрын
Should not happen.. Just crosscheck if you have missed something..may be missed systemctl enable autofs --now
Q1 in the /etc/auto.misc Do you created this access point or it has to automatically created like the case in the /etc/ auto.master file where the auto-mount point entry is automatically created. Because I did not hear any explanation when you were making the entry. I am able to create the auto mount in the /etc/auto.master file, but I can cd into the access point in the /etc/auto.misc file
@chrismbah597
Ай бұрын
Please I found the error. For anyone who is going to through this same issue. Please Make sure to run the firewall and systemctl command on the two services nfs and autofs on the client’s server, that should be after you have made an entries on the /etc/auto.master and /etc/auto.misc file . When you are done with the above step. Before run ls / command and cd to the directory in the auto.master file and lastly cd to the next directory in the /etc/auto.misc file that you called mount point.
Do you recommend a good course to accomplish RCHSA ?.
@dextutor
2 жыл бұрын
Follow these videos and linux essentials playlist. Practice is the key.
Thank you very much for this video on autofs. I have a question: what do I do when I give the command "showmount -e 172.28.45.151" for instance and I get "clnt_create: RPC: Program not registered". I look forward to your assistance. God bless.
@dextutor
2 жыл бұрын
firewall-cmd --add-service rpc-bind --permanent
@cyberswissarmy
2 жыл бұрын
same thing we only have to add the service on the server?
@ramiferwana9745
Жыл бұрын
systemctl enable --now nfs-server rpcbind
@wajdimanai2622
Жыл бұрын
systemctl start nfs-server
@MrEjo14
Жыл бұрын
@@ramiferwana9745 Thank you! :)
my question is if going to the directory the acceess directory is hidden and is not listed when doing ls. Will their script recognise the access directory?? Thank you
@dextutor
Жыл бұрын
If you know its hidden then unhide it.
@gregorkokalj9326
Жыл бұрын
@@dextutor well yes after cd into the directory it is shown but will it stay that way? I will do it again and reboot the machine to be sure. I am just asking because there are various ways to do this and wanna be sure this is the correct way. Thanks again, great videos!
Is there a practice question for this one?
@dextutor
2 жыл бұрын
There's only one scenario which is explained
Hello sir Did you create access file or it automatically create it?
@dextutor
8 ай бұрын
Plz review the video once
@soundiatakeita7004
8 ай бұрын
I have reviewed it many time My doesn't create automatically that's why I'm asking?
Great Videos man, be amazing if you would increase the font a bit or zoom in.
Why two different mount point auto_mount and access ? Can we write both same name ?
@soufianayadi7519
2 ай бұрын
auto_mount is the first part of the path and access the second part. You can also write in the masters file /- and then in the map file the whole path: /auto_mount/access
Sir i had a project to do. But I am confused about taking the client and server ip address Please help me out
@dextutor
Жыл бұрын
Check the networking video. It may help
All steps done as per the video But cd access shows error
@dextutor
9 ай бұрын
Kindly recheck
Baljit Bro how to book voucher ??
@dextutor
2 жыл бұрын
training-lms.redhat.com/lmt/clmsBrowseV2.prMain?site=redhat&in_region=in&in_keyword=EX200
@Gamma_Wale
2 жыл бұрын
@@dextutor i have booked my exam on RHEL 9 version but objectives are same and i read about lvmvdo also , any suggestions.. i am little bit nervous with latest 9 version
@dextutor
2 жыл бұрын
No difference. Just ensure you have covered everything and have enough practice. VDO n LVM are covered in playlist
@Gamma_Wale
2 жыл бұрын
@@dextutor Fine bro, i will do same.
What is the ip address of client
@dextutor
Жыл бұрын
Already mentioned in video
Hello Dextutor is this for RHEL 8 or 9 ? because there is the /etc/auto.master.d/ dir to story the autof maps
Hello, DexTutor, the showmount -e command throws the following error : rpc mount export: RPC: Unable to receive; errno = Connection refused I'm not sure if I'm missing something, pls help.
@Innovationlu
Жыл бұрын
I'm experiencing the same issue
@dianam3251
Жыл бұрын
I experienced the same. Check "firewall-cmd --list-all" to see if "rpc-bind" had been added. In my case I realized I forgot to use "--permanent" when I added "rpc-bind" separately so when it reloaded it erased rpc-bind from the services that I've enabled on firewalld.
@wajdimanai2622
Жыл бұрын
make sure on the server you have added rpc-bind service to firewall with --permanent, and also make sure that nfs-server service is running
Thanks for sharing