"You really can get through by pushing a lot of buttons!" Oh bugger... you've found my secret to a 25+ year career in the IT industry... Don't tell anybody :)

@younesmohssen8158

2 жыл бұрын

Ayyyyyyyy fellow red teamer and pentester

the ones that are failing is because you are trying to write 13MHz codes to 125kHz cards. you can only write 13MHz to other 13MHz and 125KHz to other 125KHz FYI.

@jayflores3947

29 күн бұрын

Thanks

Finally found a review on these. I have the first one you have on the desk too. Was really curious how the other performs.

Well, you tried to clone 13.56MHz RFID tag and write to a 125KHz RFID tag and failed. No surprise. Still, appreciate the effort, because I am about acquire one of these on Amazon. Thanks!

I think in the detection mode, after you scanned the card, hold it against the lock, to detect any keys if it uses those. It will try to emulate the card I think.

11:28 On the left device, you can turn off the voice or raise its volume up / down by pressing navigation keys up / down.

@DayV914

Жыл бұрын

You actually cannot chance the volume at all. I own the same card reader.

It would have been nice if you wrote the models you were using in the description :(

Do you know where I can get the software for the icopy device?

How are you Dr Lock I have the first big reader that you have. I read my key. it came out "HID Card Reading Success!Replace the 5577/'s card to be copied" which keyfob should I buy to clone my key. thanks for your help

when you read the notice between Chinese and English, you see "Language: Switch Chinese and English" .. if you compare the two notices, it's easy to find where the language menu is ... once on the menu you see directly written "English" 😅

Will this work for apartment rfid stickers for the gates?

Which one do you recommend ?

Hi there, Do you know if this cloner work with keri k1881 fob or tag ?

so do the hidden micro sd card slot works?

Why can the same number be written differently in hex? In how many ways can you write the first two zeros?

Hello, I also have this copier, I have Macabook, is there any program for MacBook? I beg you

Hi which one can duplicate UHF FP4 access card?

Excellent review and I am the owner of four electric locks with three RFID TAG at 13.56 MHz, I would like to use the same RFID tags to turn on and off the electricity through an RFID card reader (used in hotel rooms) always at 13.56 MHz? In your opinion, can the RFID tags be read by both devices?

@DrLockShop

2 жыл бұрын

Sorry I have not tested it on hotel cards, maybe ?

@9548224970

3 күн бұрын

26 bit?

i have the one thats like the first device. To get the program from the device just connect it using the usb and install it. Then it will show up as a usb-device(memorystick) you can also change the language on the computer program to english. On the down right left side of the program there are 4 button. if i rember right it's the button most to the right button. i tryd the program ones. but it's was strange i tells me it's installing freezes and get stuck. then i ran it again and the program just starts up but looks like nothing been installted and it's from china so i feel like i made a mistake here. The disturbing part is the device is from china but windows just recognized it with no problem whatsoever. Is there a spyware or virus in this program? do some one know? or root kit? my device did not talk but beept. i cut the cord on the speaker. btw To use the computer program with the device have batterys in the device then connect it and turn the device on and klick on the ok butten when the msg in screen is showing. if that's not working turn it off and on.

What’s the name of the first one?

Links please for purchase please

Please go into the cracking of the other icopy device if you can please

Needed a reader in a pinch

Hello Dr, i am looking to buy a device which will allow me to add credits on a card which i use at my tennis club to dispense balls, i know that an rfid device is used for adding credits to the card, thanks

so is the device on the left a no go? given it the device itself gave ur laptop a virus upon connecting. how did u come about that?

So... which is better

I want a portable one that can decode and copy all of them even if it requires Bluetooth and a phone and even if it's a little pricey around $100-$200 and one that is somewhat easier to use that auto detects frequency

@binzulost5369

3 ай бұрын

Flipper Zero

@letsgetto1millwithoutvids

3 ай бұрын

@@binzulost5369I have a flipper zero it can do the most common ones but can't do all of them with some that it can do it can only emulate and not copy

I think you can only format NTAG cards.

Press Edit and you will be able to edit the card number to whatever number you want, then read the card you want to duplicate and then write

@kelleynoiseux1888

2 жыл бұрын

Awesome

@silasrael5

Жыл бұрын

Why type a number then read? 🤔 it will just overwrite the last thing you type.

a?re those able to program transponder keys from a vehicle? how much are they if they do ? cherers Mal in BC

@DrLockShop

3 жыл бұрын

no just some cards

I want to use this to access the pool at the hotel down the street from me, so I can by-pass the elevator and pool entrance, but don't have a room key, how can such a fantasy be fullfilled? lol..is there an average frequency I should know about, or??

@Diehard4077

2 жыл бұрын

It's not the freq it's the code on the freq

Is it possible to remove/mute sound? It’s so loud

From where to get card No???

Good afternoon, we are landlords and have pre pay electric meters at our properties. We use RFID electric cards to top up the meters. Our supplier has put up his prices again for re-charging the cards. Would the this be-able to copy a full card, and reload our empty cards please.

@DrLockShop

Жыл бұрын

no

Hi Dr Lock. I am in Brisbane and need my Mifare Ultralight EV1 card key copied for my own apartment. Do you know anyone who has the IcopyX which can copy this type of card? Many thanks.

@DrLockShop

2 жыл бұрын

no sorry

If I’m cloning a NFC TAG for a coffee Automat with money on it, will i have the same amount of money on the cloned TAG? 🤔

@binzulost5369

3 ай бұрын

Depends on how you have to charge the card if its linked to an account probably not, if you have to charge it using a machine where you have to hold the card to a sensor, probably. Great idea tho

Some tags are Duds

How do you erase data from card

All of that is 125k, isnt it?

Can u duplicate HID access card with this machine?

@vk3fbab

2 жыл бұрын

HID prox yes. HID iClass probably not.

Hi, I've the first handheld device you used. But I think I have a clone of it. The software that came with it is really limited compared what I've seen with the other ones online. Could you share you software in hopes it works with my version?

@mahmoudbentiu9116

3 жыл бұрын

I think the software of the 2nd one and the 1st one should work interchangable

@silasrael5

Жыл бұрын

Could you share the software

Hi are you able to share the PC software for the first rfid Reader in the Video(with the blue label) I lost my software

@DrLockShop

2 жыл бұрын

No sorry I dont have it

from what distance can these readers read or copy a signal?

@syncrowave9815

2 жыл бұрын

…

@kennym2977

2 жыл бұрын

About 2cm. These are not long range devices. They are intended to be used in direct contact with the card/fob.

Stay safe. Watch for falling 🌳s and monsters under the 🛌.

In Chinese at 8:57 it’s telling you writing failed.

16:26 buddy it says literally please change into a copy card XD I think you have to go to that option and then write XD

no one is better ✌️👆than this dwag he help me with the otp by pass method and work me through all process

8:03 😂😂😂

Would not be using wifi password. It definitely will send your wifi password to mother ship.

There's way too many knockoffs I saw many brands of those 2 types your using

@DrLockShop

3 жыл бұрын

I know, when you order you never know what you are getting , some tags you have to swipe twice or long swipe to use.. cheap china

lol Doc, you really dont quite know what your doing. Good vid tho

не по русски ((((

The voice is annoying I'd just cut the cable to the speaker

Google translate 😅

Some people just waste money?

@danielthomas17

2 жыл бұрын

Why ?

A review from a guy who knows absolutely nothing about anything ..total rubbish