Throne 2 here.I put some felt in the shroud to cover the holes. This way the rifle can still bleed some air out of the back to keep noise down but I won't get my hands and face covered with fine lead dust(nasty stuff). Impressed with the rifle. Only have a stuck reg now so its repair time. Tip: FX gen 3 air bottles do work but the shroud doesn't allow for a smooth fit if you want to use a carbon bottle (slightly larger diameter), changing POI. Aluminum bottles fit fine.

Hi tnks for video . please make video for how power up to 80 Jules throne gen 2

I've been impressed with my original throne for over 3 years. A little bit of tweaking and polish it's a excellent day to day shooter. Definitely more reliable than one my European manufactured rifles 😉

@AfricanAirOrdnance

Жыл бұрын

They have a few small issues but great rifles.

@derivas007

8 ай бұрын

@@AfricanAirOrdnance what kind of issues?

Buen video buen arma buen tirador 👍🏼

Awesome video and shooting great air gun thanks for sharing bsafe buddy 👍

@AfricanAirOrdnance

Жыл бұрын

Thank you

@dominikjarmusz2572

4 ай бұрын

What kind of issues?

Many have criticized the airgun. gave a video of caiman x version.

very very good review!

@AfricanAirOrdnance

29 күн бұрын

thank you for watchinig

Nice..

Ive been eyeing this little beast for a while now. My only concern is power. If you were to make an upgrade kit that would allow it to shoot 25gr slugs at 850-900fps, it would be a great buy. Do you think you will make a kit for this?

@AfricanAirOrdnance

Жыл бұрын

I may look into it great rifle well name but is lacking in power

Awesom

Looks very much like a gun FX would design LOL. Have you tried pumping out more power from this very well presented PCP?

@AfricanAirOrdnance

Жыл бұрын

Not yet but it's a very different design to a FX on the inside and outside.

Hi, nice Review on this nice Rifle. But fit this Rifle with the Scope in this Hardcase from Reximex? 🤔

@AfricanAirOrdnance

29 күн бұрын

Yip its a shit case just get decent gun bag

Awesome video. Are you going to make an upgrade kit for this?

@AfricanAirOrdnance

Жыл бұрын

Maybe

How much sir reximex throne Gen 2 thank you

Hi. which one is better to choose? reximex ixia (thron) or meta plus? thanks for the answer

@AfricanAirOrdnance

29 күн бұрын

Ive only shot the throne so far great little rifle

Cual es el $$ y donde puedo comprar este rifle

where did u get the moderator?cost? i couldnt make out what u said at the end

@AfricanAirOrdnance

Ай бұрын

It's called the Air Bandit I make here at www africanairordnance.com

Based on your experience whats the most powerful .22 pcp airgun available in the market now ?

@AfricanAirOrdnance

Жыл бұрын

Vulcan 3 if set up correctly will shoot 40gn slug between 1100fps and 1120 fps kzread.info/dash/bejne/hXeaq6Z7fcackrA.html

@chrisford9045

Жыл бұрын

​@@AfricanAirOrdnance what makes the vulcan 3 shoot so fast? Is it something to do with the valve and transfer port or just high reg pressure?

@AfricanAirOrdnance

Жыл бұрын

VULCAN 3 can be tuned to shoot a 40gn 1130 fps so I would have to say the Vulcan 3 as far as 5.5mm

@AfricanAirOrdnance

Жыл бұрын

@@chrisford9045 High reg pressure 700 mm barrel and valve design

@2967575

Жыл бұрын

@@AfricanAirOrdnance wow , what about the .25 and the .30

I can wait for the airgun industry to stop using belleville washers in the regulator and start using springs like the paint ball industry does. Then we will no longer need to de-gas the rifle to turn down the regulator. Long over do honestly. The Skout Epoch has exactly that in its regulator and from a manufacturing perspective the spring one would think would be cheaper, more consistent, and have less issues over time. I believe this is a good rifle and I'm looking forward to getting my hands on one. Hopefully by then it will come with a 500-580cc carbon bottle.

@shootersdenpk

Жыл бұрын

Reximex does offer it with a 480cc CF Bottle.

@imdaprophet

Жыл бұрын

@@shootersdenpk I knew Reximex was offering a CF bottle. But I think they issues with clearance of bottle and shroud then reverb. Things might be different now. But in the U.K. I think I saw them for 270 pounds. A third of the price of the riffle. If you really want to make this gun a great shooter. Get a LW barrel or CZ the same length as the shroud. It will be 70 mm longer remove the shroud baffles then you can directly screw the mod to the barrel not shroud. For 140 pounds ish.

Where can I buy this fine machine in USA ??????

@AfricanAirOrdnance

Жыл бұрын

No clue but try contacting the company directly. as they could tell you who they have in the USA

does it have ligth trigger?

@AfricanAirOrdnance

29 күн бұрын

Trigger was great

Винтовка нуждается в доработке серьезной .. ствол поменять на LW ,колбу на композитную . ,заредукторный обьем увеличить и еще много манипуляций с ней чтоб довести до ума

Why you got gloves on 🤷

@AfricanAirOrdnance

Жыл бұрын

Gloves just cover my ugly hands ✋️

@marcelolima4172

4 ай бұрын

@@AfricanAirOrdnance😂😂

Turkey made rifles are good but European barrels..FX,Lothar Walter or CZ are much tighter in grouping.

Сена $

Good day, do you have an email address through which may contact for some advice on this pcp ?

@AfricanAirOrdnance

Жыл бұрын

africanairordnance@gmail.com

I've been impressed with my original throne for over 3 years. A little bit of tweaking and polish it's a excellent day to day shooter. Definitely more reliable than one my European manufactured rifles 😉

@AfricanAirOrdnance

Жыл бұрын

I have both the Gen 1 and 2 and really like both rifles

@garymurray5361

Жыл бұрын

@@AfricanAirOrdnance good to hear. For the money , the throne is excellent. So far I haven't felt the need to buy the throne 2. I look forward to your future tests.

@JoelAdolfo15

Жыл бұрын

We're can I buy the silencer use in that throne gen2?