Keep making Revit videos like this. Awesome job

Amazing! Starting to be a fan!

your practices have been so helpful, sincerely, thank you very much :)))

You ROCK ! Thanks

Thank you so much. 学到了太感谢了

This is a great exercise 💯💯. Could you please do an exercise where you model the curtain walls as well.

Very amazing tutorial. ❤❤

thanks a lot for the tutorial

Thanks!

thank youu this really helped alooot 💖💗💗💖💖💖

Thanks for teaching.

THANKS MAN VERRY HELPFUL 👌

educational! Thanks

Thank you

Thanks for the tutorial sir.

Thanks ❤❤❤

GREAT

Thanks ♥️♥️♥️

great video as usual bin , your videos are amazing and to the point. i have a question please : icant do a closed Spline in revit , do you have any idea?

@BINHE615

Жыл бұрын

No, it is not possible in Revit.

Hey Bin, thanks for your tutorial, always learn things from you! currently I have a large scale battens ceiling in organic shape,(from contractor bim team, but then model is original dwg), just wondering if I can mass a roof basic on that battens ceiling ----like you did here. Thanks!

@BINHE615

Жыл бұрын

It's hard to say without any images or diagrams. Could you please post them on Google Docs?

Nice and straight forward …. Good job Bin 1. Would it makes any difference if the path was a spline thru points ? 2. The issue in reference lines profiles vs not-reference lines is : although you can still edit the profiles at the ends of the form , but you won’t be able to find the profiles in the middle (u think it’s possible to insert such profile compacted profiles with many arcs?) 3. It would be great if u can one time show us (as u can see in the picture in the narrowest part) the transition from the straight part (the profile consists of almost 3,4 straight lines) into 3,4 larger arcs then 3,4 much larger arcs etc.

@BINHE615

Жыл бұрын

1. I think the result can be very similar. 2. You can, you need to hover the cursor on the profile and it will appear. 3. All the lines here are arcs, we copy (CC) and scale (RE) to create all the profiles, remember?

how can i adjust the base offset/height of the whole massing? because the mass is too high / very elevated to my liking. thank you!

❤❤❤

Thank you. Where can we send you suggestions for youtube videos ?

@BINHE615

Жыл бұрын

docs.google.com/document/d/14UDBuC-dM-GcAC8kh2MKaKFt8cScus_ZTA1t7cEvYM0/edit Here

@zoekoffi8983

Жыл бұрын

@@BINHE615 Thank you

Great Bin. Thnx. Is it possible to categorize this mass as Generic Model so that we can change different categories in it later on? If yes, how?

@BINHE615

Ай бұрын

Depends. If you model this as an adaptive family, you can change the category to some other, but if you model it as a model in place, I don't think you can change it.

Hello, i wanted to ask if you could make a tutorial where you make a plan and add a mass to it

@BINHE615

Жыл бұрын

Model in place mass on an existing building?

@rachaelkunda4631

Жыл бұрын

@@BINHE615 yes please

can you do a video for merecedes benz museum in stuttgart ?

@BINHE615

Жыл бұрын

I'm afraid it is more a Rhino project.

Can you send sample

HEY! i really need help Asap! i have tilted wall that should be glass panels, its a triangular shape. i tried mass but i couldnt add glass panels. its just a big block of glass, i tried family like you stated, couldnt work because it was rectangular, and the mass isnt. I really dont know how to do this. plz help! i also tried usin: wall-curtainwall-draw-pickfaces. didnt work. edit: i can provide ss.

@BINHE615

7 ай бұрын

You have different options. 1, sloped glazing: model it as a sloped glazing(roof) with footprint and slope arrow. This should be the easiest if it works. Option 2, use model in place mass, place 3 points on the corners, connect then using spline through points, then create a surface using these lines, after that, you can either use divided surface with pattern based family in the mass, or place curtain system outside of the mass. Option 3, you can also use model in place generic model, and place roof by face on it, this might not work with sloped glazing. If you still not sure how, post it in the the file and I’ll get back to you.

@wilson.a.4147

7 ай бұрын

@@BINHE615 thank you, it worked!

hi ben >>I followed all steps and repeated them>>whenI reach to creat form it gives me a massege AND it didnt work>>what mistake may be i made?

@BINHE615

11 ай бұрын

First, try creating a form using the same profiles along the path. Then, adjust the profile as needed. You might find this approach helpful. Sometimes, it's necessary to start by including only part of the profiles in the form and then gradually add more profiles into it.

how to make it in a close loop shape?

@BINHE615

14 күн бұрын

Unfotunately, Revit does not support closed spline, but you can try creating it using 2 splines, and place profiles on each spline to create separate forms.

How do you give this a thickness?

@BINHE615

7 ай бұрын

You can place roof/wall by face so you can control the thickness by roof/wall type. Alternately, you can use closed loop as profile so you get solid mass instead of surface.

is this just impossible now? I get a self intersecting geometry error no matter how I try to do a profile sweep :(

@BINHE615

4 ай бұрын

Try starting with something simple first. For example, you can create a straight path with multiple points. Once the surface is created, you can adjust the points to change the shape of the path.

@zena-te2ee

4 ай бұрын

thanks for responding! I ended up figuring it out, the spline was too sharp for the size of the profile. @@BINHE615

@zena-te2ee

4 ай бұрын

great advice will definitely need it@@BINHE615

can you share the model

@BINHE615

Жыл бұрын

Sorry mate, I didn't save it. Follow the video and I am sure you can do it yourself.

Is there any credit to the concrete and structure engineers of this work or did they just remember the architects? All you hear about is Zaha Hadid!

@BINHE615

Жыл бұрын

Agree.

Don’t eat and play with your mouth while you talking in the video please 👍🏻

@BINHE615

4 ай бұрын

:P

Omg the saliva noise is so annoying

Thank you

educational! Thanks

how can i adjust the base offset/height of the whole massing? because the mass is too high / very elevated to my liking. thank you!

Thank you

how can i adjust the base offset/height of the whole massing? because the mass is too high / very elevated to my liking. thank you!

@BINHE615

4 ай бұрын

The best way is to adjust the shape of the profile, the surface/mass will adjust automatically.