Thank you so much!! It’s like every time I need to know how to do something new you make a video about it later that day

Excelent man, it doesn’t matter if the wattage is incorrect, this is a tutorial to learn how to do it in Revit, so it’s great, thanks Balkan, see you tomorrow.

@echawia

5 жыл бұрын

exactly

@urbanturbine

3 жыл бұрын

It was important for him to show that you can't connect a 277V device to 120V panel. They are different voltage (not wattage).

Great job! Your tutorial is better than all the others on the internet; including Autodesk. You jumped right into it without a lot of random discussion and fanfare. New subscriber!

Really, Thankyou so much!! just watching your video i really can understand things in revit. Thanks Man!

So helpful ! It covered mostly lighting design layout knowledge. Thank you !

Thanks for the tutorial bro. I needed this. I'm gonna have to use Revit at my job at some point and I should get a head start if I can.

Great information, thak you I've been working in modeling, but this video show me more of the posibilities on Revit. Please keep showing more of all your approaches.

Very nice class, super clear and objective, direct to the point without missing important details. Thank you !

Perty clear bro.. Much love and respect from Indonesia

Very Well Explained... Great Work!

i concur with mohie below, currently lecturing electrical and mechanical apprentices and your videos are such a help (clap emoji)

Thank you for sharing ! Great tutorial !

Thank you for sharing your talent.

Thank you for your Chanel. It helps a lot to many people who is learning Revit.

Thank you for this video, it's very helpful for beginners. Much appreciated

This is an amazing video , very clear and detailed . Thanks you've been a help in my Architecture school projects .

I am just learning the electrical part too and found some video that mentions that the two ways revit draws the wires are actually 2 different conventions, the arc is for concealed wires and the chamfered for exposed wires. Keep up the good work!

Thanks for your wonderful work

amazing as usual

Thanks Very much. This video is so helpful to understand Electrical circuit in Revit.

Excellent video! Thank you!

Ima download it thanks for sharing!!

Very useful balkan, thanks 👌

Great video as always! You've been helping me a lot with my first job, hopefully you'll make a tutorial for conduits and plumbing in 3D soon!

GOD GIVE YOU THE TALENT AND YOU ARE NOW GIVING TO OTHERS... THANK YOU BROTHERRR... @BALKAN ARMY

Very cool easy to follow Thank you !!

Thank you! 🙏 You helped me a lot with this useful video 😊

Thanks balkan. Amazing

This tutorial for beginners is very good, you showed in a general way the main elements, it will be necessary to deepen more according to the laws of each country. In my country it is customary to place the number of cables with gauge and diameter of the pipe that leads in each electrical circuit, how are they placed in the electrical plane? greetings from Mexico.

nice video. thank you balkan

awesome, thank you very much for this video

Grear work and very nice presentation.

thanks, it actually let me through so i could download it.

Thanks for the crash course! Nicely done. I would have liked to see some editing options, like how do I remove outlets from a circuit without deleting the outlet. Or move an outlet to another circuit. Still nice job.

Thanks For Revit Video .

Thank you very much man

Good job. Note: the 277 is voltage. Thanks

Excellent Video

Thank you so much!

You are awesome!!

Thank you!

Very good video. Thank you

Thanks for this tutorial.....make more vidoes

I would love to see an update on this video somewhere in the future. I think this could be very useful to a lot of people.

awsome,thanks

Thank you!! ♥

Thank you

Thank you for sharing this informative video~! Greatly learned... 😃

Great one

wow its great explanation

thank you very much bro.....

thank you

Thank you .. I'm actually using Auto Cad electrical and I can see Revit is easier and more practical

Very nice

Love it

Thanks bro🙏🙏🙏

you are the best

Great!

Great sir , sir plz more electric work plz

Thanks for this tutorial and please if you can make tutorial for mechanical 🤓

Great Video. XD

thanks

Thanks

very good...

Thank you for sharing this informative video. can electrical schematic diagram be done in revit?

Very nice. Please upload detail video about customize electrical load schedule pro

Excellent video, I have one question.. How can I add the rest of the levels from my linked project?

Amazing video. I have a question about the illumination. Do you connect the illumination system like the electric system? Sincerely AD

Thanks a lot. Could you explain about placing these socket outlets with dimensions on a linked architecture file. This is without dimensions

very helpful; video balkan architech pls add revitt files for use thnks

Hi Luke here an electrician from London UK. I'd like to do a full course on this and find work doing Electrical drawings. What knowledge or qualifications would I need before going into this? Thanks so much.

thank you can u plz make video on new family creation

Can u make circuit breaker diagrams in REVIT I think it's not possible. you cant draw 3D wires in Revit.

how these panels and switches had shown in your ceiling plan ?

bro, how to make electrical plan after inserting a autocad plan using revit.

hello, sir good morning. thanks for nice video very helpful, sir can u tell me how to get a switch of the door? I didn't find

But anyway...good course! Thx!

Super kanal. trebala bi mi pomoc oko revita i magicad-a. inace sturdiram eletro thniku. ako postoji mogucnost na srpskom bili bi odlicno.

Excellent video, but what abouy the config.? I´m getting so many warnings while trying to do my circuits and can´t use the default schudle template, is not showing anything. Thanks (or if someone have the answer I´ll listen to it)

Hi, BA. Hope you're doing well and that I'm not too late: I have a problem: The lights rendering on my Revit (2018) are working with me at all. The types 'spot', 'square' and 'circle' lights are too dim upon rendering, and the 'line' lights are too bright. I don't understand why at all. They're all the same intensity and luminosity and color and all, and tampering with the rendering lighting/shadowing dials somewhat improves some light types only to screw over others. After days of trying to fix the problem in vain, the internet didn't give me any answers other than using the 'Photometric Web' type of lights, of which I have no families. I looked for them but couldn't find any like they show on some KZread videos. Every time I get a bearing it betrays me. Have you any good advice here?

hi, i would like to thnak you for making this video, i tried this in my own project and works fine, after some time i want to adjust the elevation of the lights but i cant. then i tried deleting it and remake them and it worked. after that i moved on to the second floor and tried to remake the ligthign on 2/F but i can not set the elevation. is it some setting problems?? thank you

Sir please make more and more videos on this topic

@shabbirahamed2881

5 жыл бұрын

yeh bro i am also want more ....... plz

What will you add in power floor plan.

Can this be done within an existing Architectural Revit file? All the lights and outlets are already placed, and I can create a panel schedule, but I cannot add any lights or outlets to the schedule or create circuits.

When I first started I could import samples but now everti I do so it just gives the soft 1. I want to cut, stretch and edit the

can you use/ insert a dwg architectural floor plan background in revit and use that to layout your lighting and power, and circuit it as well? reason i ask bcos most clients still use autocad. PLEASE HELP!!!

hello balkan, your video is very useful, but while i am doing this i couldn't find M_ Duplex Receptacle Standard option , I go to device- electrical fixture , but when i click there it comes Twin switched Socket Outlet standard. Please help me with this Thanks, Ashwini

what is the difference between a power plan and a lighting plan. Why draw sockets in the lighting plan?

Thank you for all of your videos. I have nearly watch all of ur videos. Can I get a sample revit file of a simple house(1HBK) with complete MEP design which you have done.

@manojkumarc3157

3 жыл бұрын

my mail ID manojcmkumararmy@gmail.com. Kindly please mail if possible.

I tried placing a panel but it says None of the created elements are visable in floor plan 0 - I was placing in the correct floor plan and can see it in 3D view however. Any ideas?

can I do my circuit without recognizing the room as you did in 7:15 is it necessary ??

What is lookup table how to use those to family

Is this "banel board" or "panel board" and you can correct it by editing 😊

Hello sir, I have a problem. I made a legend and I have electrical panels in the plan with different colors. How do these colors appear in the legend (electrical panel for generator-powered equipment, half red and half white)

how did you add the electrical default i mean how did you get that??? how can i get that ???

what was that with the 270 Watt ?? Power limitations ? or did you mean 270 Volt....voltage incompatibility? ....preventing the light bulbs to connect tot the panel...

Hello, I have never been able to get the electrical template. How can i fix this error? thanks 4 the vid

Please from where I get electrical symbols to add to Revit?

hi in minute 15:00 how can explain to the client that not all circuit are connected to one breaker it supposed that all 4 socket goes for one breaker

what is the MEP Setting s for complete the circuit ? i cant select the panel to complete the circuit