For a complete explanation of ALL Revit tools and the whole workflow on projects I have created a course (for beginners): balkanarchitect.com/p/autodesk-revit-course-beginner-to-intermediate-level

@SoLuna137

4 жыл бұрын

you're too fast man. It would help if you explain every method you make. I don't know how you really mean by beginner. Anyways thanks.

@FranklinClinton204

3 жыл бұрын

@@SoLuna137 bookmark the video for replay

@cMajormusic_maliarachchige

2 жыл бұрын

Can't understand How do you got component library and Customised Door Windows.. Move walls and Dimensions.

As a total beginner, I had a lot of difficulties in doing your shortcuts without clear explanations on how to do them. I took a lot of time though I finally managed. Thank you so much will be watching your part two.

Loved it, I was getting training for the HVAC certification and only software that made me discouraged was Revit and now I have got some hope to do something.

I can't say I'm perfect yet but the best way is to be patient and skip, stop, rewind and follow you whilst also designing on my computer. I grew frustrated at first until I decided to do exactly what you're doing. Big ups, you're the best facilitator on YT. Bravo

Druže, ovo ti je sjajna ideja. Ne znam šta si planirao dalje, ali trebalo bi da napraviš seriju ovih videa, sa spratom, presecima, parternim rešenjem... ubaciš mu i malo tehničkog dela- zidovi sa slojevima, izolacija, armatura u skeletu. Posle izvučeš detalje. Kompletan projekat. To je nešto što bi najviše valjalo i najpotrebnije bilo svakom studentu, pogotovo ako počinje tek.

I just installed the Revit trial and this is my first tutorial. The pace of this is nuts. I have to keep pausing every 4 or 5 seconds to go back to Revit and figure out what you've done. Thank you for making this, it is loaded with information for a newbie like me.

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

@techdiyer5290

8 ай бұрын

Think of it like drawing. And just use tools to do what you want. The important paarts are door sizes, measurements, rendering scaling etc.

Awesome. This is my first Revit building that I've done. My brother is an Architects and he told me to look at your video's. Took me 5 hours and plenty have been learned.💪

Cannot really thank you enough dear. You made me get into track very fast and effectively. Your effort is highly appreciated. 🙌

This tutorial can also be presented as a Revit Refresher Course for those already using Revit but want to perfect their skills. Excellent tutorial, keep it up.

Thank you very much for this tutorial. I like how you used shortcuts, how you make things easier and save more time. Your explanation is very clear too. Thanks heaps :) looking forward for part 2 and your revit course.

I am a beginner who is trying to use Revit for my architectural skills and your video( this specific video) helped me a lot---you actually used less than 25 minutes to show us a good tutorial---Thanks so much for preparing this video--keep up the good work

Love the subtle humour in there. You would expect more if you were an executive, that made me chuckle! Also learning a lot, I came from a LinkedIn Learning course and it was very general I love how you show how to actually model and use shortcuts.

As a AutoCad user for 5 years I feel like so much weight just dropped of my shoulders with Revit...thanks, learned super fast time to get to work!

Omg you Did it!!!! I was praying for this video 😂. God bless you!!

Finally found a great tutorial for beginners! Learned so much in just one video. Thank you!

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

Just fast enough and has almost everything to get me started! Thanks. The only thing these two videos are missing is how to add room dimensions.

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

This is perfection, the kind of tutorial I like, not talking too much and straight to the explanation. Thank you very much was so helpful.

bro i'm just starting to learn how to work with revit and this tutorial was extremely helpful, thank you so much!

Hvala na svim video materijalima, mislim da sam pogledala većinu. Sad potražih ovaj, jer imam jednog početnika koji me je pitao za pomoć, pa rekoh da mu preporučim. Ali, mislim da je ovo većini, ako ne i svim početnicima zaista prebrzo.

Great video, actually, all your videos are great man! much appreciated.

Thank you so much, I've been looking for a tutorial like this for a long time.

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

Awesome. Perfect tutorial for a beginner with some knowledge from Autocad.

Beautiful tutorial, I have learnt so many shortcuts thank you.

I havnt use revit, but this tutorial too fast but i feel like im loving revit, autocad user here. Cant wait to use evit soonest.

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

Awosome brother. continue this Revit tutorial daily it's a best way to understand everything step by step thank you so much brother

@easybim8939

5 жыл бұрын

Indeed

Good pace of teaching and an interesting way for me to learn key skills fast.

First time to see how you draw in revit. And making floor plan in revit is 1000x easier than making it in autocad or sketchup. Because of this, il be converting into revit. Thanks. 🙂

THANKYOU SO MUCH! As a student transitioning from using Autocad this was perfect!

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

Thank you very much! I learned alot in just a short amount of time! Ill be watching your other video tutorial. Cheers!

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

Very educative, God Bless you for your efforts and thank you

I loved your tutorial! Great job.

Amazing video! Thanks so much for sharing!

So impressive...I'm joy over this. It is my sweetest. Teach me more Brother

I love these tutorials. I just hate the ads every 3 minutes.

I would recommend to keep the units in milimeter. Your walls are called "Generic 300mm", so it could be very confusing when the dimensions are in centimeter.

Great tutorials Balkan Bro ♥️

Saw the other comments, just wanted to say that I've actually been using AutoCAD for the last couple of years to do architecture stuff(for curiosity, not professionally) and this tutorial was really cool, very short for so much you taught in a few minutes. Appreciate the effort and the tips! Very USA lookalike house and furniture

Thank you for a Great beginner tutorial!

Thanks for a perfect speed, other tutorials just make you sleep, thanks a lot very useful, finally i learned somethinf instead of yawning my day away. all others complaining bout it being too fast should remember its not a kindergarden school plzzzz

@lilla_on_a_mission

3 жыл бұрын

Same for me, it was just the right speed. (To be fair I've been using various 2D and 3D CAD software for years, just not Revit.)

Awesome tutorial, could you please show how to show the outside timber frame dimensions

Very good tutorial. Thank you!

am work the model from begining to end and its working for me, good ,great job!!!!

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

I always leave 625mm for kitchen units/wardrobes because the wall is never 100% straight. You can always leave a tiny gap at the back but it ensures that it doesn't stick out.

perfect tutorial and really helpful. Thanks a lot. please publish more project on revit . thanks

That was nice balkan to see your tuto

Excellent tutorial. Thank You for sharing.

Cool. I like the fast pace, no bullshit.

Great tutorial, thanks!

BRO THANKS! IT'S SO CLEAR

Great way of learning ! i really appreciate this. Good job ! keep posting more ....

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

Thank you. This is exactly what I wanted.

thanks for sharing, i appreciate your hard work and best explainations

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

Wow.. That's cool. I never knew a software like this existed.

Very good , thank you Balkan

Awesome stuff balkan.. I'm ur new subscriber 👌👌

It was really helpful ! Thank you very much!

Thank you do much Balkan, I have learnt a lot.

Thanks for a free tutorial. much appreciated.

Great tutorial. Keep up the good work.

Thank you so much for sharing the video, it is very helpful.

Thank you so much for the tutorial

this is good to see the speed you work at. but I feel like you glaze past some of the short cuts you use. eg flipping the door before placing. or maybe how you reworked the walls after you split them.

Great Tutorial Thanks Speed is excellent not boring, and one can pause and watch again until he gets it. I just suggest to tell us when you click something from the menu, and there are some hotkeys shortcuts you missed to say them. Last, what is the difference between CO (copy) and CS (create similar)?

Thank you for this video it was really simple and helpful

I was install revit 2019 but when I do the cross section setting but in this software not show material .

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

great video, thank you for it!

perfect, thanks for the tutorial!!

@michaeldiana8281

3 жыл бұрын

kzread.info/dash/bejne/f6l_o5pwgdKyp5s.html

I have lost my level 1 / floor plan and it's just the 3-D version left! how do i get back floorplan / level1?

I’m now on my way! Thx 🙏🏻 so very much! ♾ d

Hey I've been following your videos for quite a while and you guys are doing a great job. I've run into a few problems in revit, which though simple, i have been unable to find a solution: 1.How to annotate a ramp properly with slope arrows in the conventional direction? 2.How to annotate a cutout in the floor slab(a shaft works for making the cutout), but how do you put a cross across it in the plan view to delineate the cutout? 3.if we've modeled like an actual construction with slab beam and column apart from walls, how do we assign a material for the whole of the elevation facade in continuity rather assigning different colors and materials on different sides?

Excellent video my friend!

Very informative! Thank you!

Thank you. Very helpful :)

how to overcome "highlighted floor overlap issue ? when i am doing the hatches it is showing error message.

Hi men.... you are a master!!!!thank you men. really the best!

Thank you for sharing.

thank you for your video. It was helpful!!!

its priceless. the slickness and the passion of the devs. priceless. what is cheaper and better than soft? Piracy is NOT the answer if you

Thanks man it was a good Tutorial

best tutorials in youtube

Beginner tutorial, the first thing out your mouth was "I'm just going to change the units to mtrs" but then you appeared to hotkey open a dialogue box, you need to explain to beginners how you open up the menu to change units.

@tebogomodingoane3967

3 жыл бұрын

@Kaung Sithu hi Kaung, where did he get the projct units. im struggling to find it

@tebogomodingoane3967

3 жыл бұрын

kzread.info/dash/bejne/hHp1qqp9pMK4qqg.html Hi Alba, hope this helps

@joellee376

3 жыл бұрын

Thank you!

@notmegabriel

2 жыл бұрын

He said, press "UN" to change units...

@dongshenghan1473

Жыл бұрын

it is a beginner tutorial not a kids Sunday art project amigo. How hard is it to google “revit change unit hotkey”? And lo and behold, the first result you get is the official pdf for all the hot keys…

An excellent approach.

T hanks for this unique tutorial for interested beginners like

Good Tutorial Thank you

mce video. how to change the uniit for the walls from english to metric? i already change the unit to centimeters. because still the unit for the wall appears inches,,

thanks. I usually did plan on sketching up but when I go into Revit, I thought I have to do all those "rectangles" on the plan inside the component tab and it was a nightmare, it was good to know I can use annotation to draw these lines lol save me a lot of time....

nice work man

hey balkan i really enjoy your videos but im having troubles with hatching floors the way you do it. Whenever i get the surface pattern it appears overwritting the families i have already loaded as if they were transparent, if you could tell me how to change that i would be so very grateful.

Sorry, how do you adjust measurement from edge of the walls during creating walls? Already in default already is from middle of the wall, and i always need to calculate half of thickness of the wall minus dimension. Thank you in advance!

Amazing tutorial

so great tutorial. thanks a lot

Thanks this is the best way i have seen for metric

You are the best👌🏻

Wall Measurments For some reason I put the change in cm and when I change the units to cm and click on the wall it only comes up in inches ?

On my own learning can never stop

nice work👍👏

Can you please explain how to set it up to level 1 please .My plan starting from level 0 and is not looking good as i get the error all the time. Thanks!!!

Always watch your video's they're always informative. Could you do a video on electrical layouts and plumbing.

woow! this helped a lot.

Thanks for this tutorial