I appreciate the honesty. I have the 1st gen drifter and could never get it to drift like a 1/27. I hope a hobby grade 1/43 drifter comes out since the crawlers in that scale work well.

I bought the c75 from radiomaster and was planning to get this as well, but it’s not on their website anymore. I looked if they still had the c75 but it was also gone for no reason. Have they stopped selling turbo racing cars for no reason? I’m pretty lucky I guess I got my C75 about a week before they disappeared but still kinda weird.

great video as always man! thanks for reviewing this!

Always great videos Mr Beaver sir! 🍻😊

Thanks for the review!

It all comes down to the surface. It goes well enough on the "Turbo Racing" drift mat. Initially, I struggled with this. Then I bought the drift mat and now it's more fun to play with. Even so, the car does not hold a drift for long. It's more akin to wheelspin and swinging out the tailend.

Thanks bro, this video is very helpful ✔

I knew it. it would not drift properly. and could not hold a slide. I doubtful at first that this small rc car can't hold a slide becoz of what i saw from previous turbo racing drift rc.

@braelighty6212

28 күн бұрын

Skill issues

I just ordered the limited edition version of this C65 car. Its orange car. Have you seen it? It comes with a different new orange transmitter and a 7 channel receiver. The transmitter comes with a big flashlight built in it, that's a very strange thing to add to a transmitter. Id like to know your analysis on that new transmitter.

@BeaversHobby

27 күн бұрын

That transmitter is the flagship one from Turbo Racing and it's really good. You can also use it with their receivers too.

There are videos for turning hot wheels into drift cars. They are the same scale and relative size as this car. They work well. I wonder if it's the dicast body weight that helps those cars. It got me thinking, could this car be improved with weight and a better gyro?

@BeaversHobby

Ай бұрын

Weight do translate to momentum which these small cars don't have so that helps. Other important things are steering angle and the capability of the gyro. It needs a lot of steering angle couple with not twitchy gyro to be able to hold the drift.

I actually think that even on surfaces that do not allow you to hold the drift, they are still super fun and the quality of finish is pretty good. It is fun to try to run them fast, because you end up with lots of powerslides. It is like a hillclimb with an overpowered car. 😂

I wonder why there are a few videos where it does very controlled drifts. Do you think they are completely faked ?

@BeaversHobby

Ай бұрын

I don't think they faked the drift (although I haven't watched other reviews yet). To my best ability with good surface, this car can do skids for a few seconds before snapping back so with good camera angle & cut it could appear to be drifting.

hello what gyro is best to buy?

@BeaversHobby

19 күн бұрын

GT55 or DasMikro is great with the steering curve and wheel shake filter. After that there's AGFC GYS-2 V4 which has similar steering curve but not as good filter so you might get wheel shake on some cars.

@Noonamee-x6c

18 күн бұрын

I need for LDRC HONDA NSX Which one is better

@BeaversHobby

18 күн бұрын

@@Noonamee-x6c GT55 V4 www.gt55racing.com/products/gt55racing-gyro-v4-for-1-24-1-28-drift-car-gt55-v4-s01?DIST=RUZBGw%3D%3D

@Noonamee-x6c

17 күн бұрын

@@BeaversHobby Thank

hard to explain but the turbo racing drift mat makes them glide like butter. without it you really have to play with the gyro and move slow.

@BeaversHobby

Ай бұрын

Thanks. I'll try to find out what kind of surface or material it is. Does it make the car slide indefinitely like a proper drift car or for a few seconds? The problem I have is that it can do a bit of tail out action for a few seconds then it'll straighten out even if the gyro is already dialed in. In my definition, a drift RC has to be able to slide indefinitely until I decide to stop. This one just can't do that no matter the surface.

@TR850

Ай бұрын

I have one and I actually think it works better if you carry more speed. And that is equally true with real cars, you have to have enough speed, otherwise it is more of a powerslide than drift.

@StaticPoo

Ай бұрын

@TR850 You need the power but should only use 20-30% in order to slide. Too much power will make you spin out. Holding the drift is only possible when you have throttle control.

@droneracer

26 күн бұрын

@@BeaversHobby it's not easy but it does hold a drift on the 900mm × 600 drift mat. Throttle and gyro at about 50%. also the front suspension is adjustable, if it's adjusted wrong the rear end tries to overtake the front causing immediate 360 spins.

I saw other people having a hard time with it and they turned the gyro down and it was better. I don't have one so I never got to try it

@BeaversHobby

Ай бұрын

Turning gyro down helps a bit but the steering angle is not good enough to keep it sideways.

Die autos funktionieren nur mit der extra turboracing driftstrecke

@jordanpopo9693

Ай бұрын

Not with this new version it works perfectly fine on any smooth platform

This is terrible a review i love mine its way better than the previous version i can use its on my kitchens work top and on the turbo racing drift track sweet you must be doing something wrong

@BeaversHobby

Ай бұрын

Thanks for the comment and I'm glad you like the car. But this is really not for me or I probably expected it to do much better than a bit of skidding before snapping back to straight.

@nguyenvietanh27

Ай бұрын

May I know details of how you tune it? I tried for hours but it doesn’t work for me.