Googled for 20 minutes to find a good plate with a good fit that doesn’t overhang. Thank you boss!!

I just wanted to thank you for your review, sir. I've been trying to find the perfect sight and mounting plate for my G2C for the longest time and I found it in this video. I just finished installing the peripherals on my pistol and it's exactly what I was looking AND hoping for. Thank you again!

@teamsankey560

2 жыл бұрын

Glad I could assist.

One key and important feature I forgot to add pertaining to the OLight is the fact that it has a magnet at the bottom of the light where you can charge the light.

Nice upgrade for G2c red dot

Appreciate the honest review. I went with your recommendations for your carry. Great info, you dont need all the fluff some youtubers have. Just plain facts is what I'm looking for.

@teamsankey560

2 жыл бұрын

Thanks for the positive feedback!

Good video you answered all the questions the other videos don’t

@teamsankey560

3 жыл бұрын

Thank you sir.

I have the RD3-0012 ADE on my G19 with a DDI Plate and the fit was great and the width is OK when on a wider double stack slide. I use the WERTZ M6 IWB Holster with the Olight Baldor Mini. Although I’ve lost the iron sight (rear) and no co-witness ability, proper use of both optics and laser I do not anticipate any loss in a quick ability to get my barrel on target QUICKLY. I still run my G26 with irons and TLR-6 with Vedder holster IWB. I’ve noticed no carry difficulties with the new optics and with the Glock platform (point and shoot grip angle) have no problem in rapid acquisition of the DOT. IF Ranges are close, laser time. The added weight to the G19 slide was no problem with any of my range FMJ ammo and defensive are higher power any way. The larger 0012 window does allow for greater acquisition esp in stressful draw and 6MOA dot I’m on the steel.

@ficobrosseau6709

5 ай бұрын

Get your goofy Glock 🍑 outa here 🤡

I’m using the DPP plate. Just installed it today so will install red dot tomorrow after locktite sets

@princebiliboajr.7601

2 ай бұрын

How’s it holding? Does it move outta place ?

My Galloway Precision Mount I had to sand it down like 5 cm just so it'll fit in my holster I've got a tactical holster and it's got like 2 3 cm in between the holster and the site plate just so my gun would fit cuz it was pushing the slide back as I put it in the holster

Good stuff man. Can you make a light bearing holster video so I can see if the micro red dot fits the holster as well?

@teamsankey560

3 жыл бұрын

I most certainly will!

Amazon has it for $88.00 ADE optic sight

Love what you did with these taurus so slick , im a taurua owner and a big fan as well very reliable guns

@teamsankey560

3 жыл бұрын

Thanks man. I hear a lot of bad things about the G2 series but I have not had any issues with either of mine.

I don't use the safety on mine, for every day carry. I found that my holster tended to flip the safety lever to the fire position. I keep the chamber empty so my safety is an empty chamber.

Do you have a video how you mount the lakeline mounting plate?

i also love the fact the valkyrie mini is dead nuts flush. my only qualm is that there’s no laser. olight has the baldr s mini which is both light/laser. haven’t been able to find any pics of it on a g2c tho. and i’m wondering if it’s just as flush as the valkyrie.. or if it sticks out past the barrel

Maybe you said something about it and I missed it, but what was involved in mounting the plates? Did you have to mill anything or was it as simple as removing the rear sights with a (tiny) screwdriver and putting the plate on using the same holes?

Do you have a holster that works with the mini 2 light and the ADE optic?

Did the Galloway plate affect the loaded chamber indicator? Thanks in advance. Great vid 🤘 been looking at the green dot also 006

@teamsankey560

2 жыл бұрын

The plate didn’t affect the load indicator. I had to double check lol.

I have the same gun with the green dot. I am also going to add the olight. What holster do you use for your carry weapon? I am having trouble finding a left handed holster.

Love them nice 👍🏻👍🏻👍🏻🫡

I picked up a G3c in March. Only since then, Did I think about an optic! Of course I can get the Laser but, To mount a red dot style of sight, Wouldn't I need a Toro style slide in order to attach a sight onto the rail or, Does it mount in place of the rear sight hole????

Does anyone know if any of these lights would fit on the tarus g2c single stack mag model?

I had an issue with my olight baldr mini becoming coated in GSR (gunshot residue) after a single 32 rd magazine in the g2c to the point where it lost usability and the light and laser were blocked entirely. Thankfully the Baldr Mini was cleanable and placed onto a different pistol.

@KrisCox

Жыл бұрын

I cleaned my Baldr Mini with glass cleaner and had no issues.

@rage9677

10 ай бұрын

I've also heard that if you do a light coat regualr chapstick the gsr won't stick and wipes right off.

Can you make a video of the holster you use for the g2c and wheres the link too the mounting plate?

@teamsankey560

3 жыл бұрын

I should have the holster video for you guys before the weekend. I’ve just included the links in the description.

How do you like those ADE optics? Been thinking of getting one myself.

Friend I am Brazilian and do not understand anything of English, I am using google translator. I am interested in importing a mount and a res dot. I really liked this pistol kit on the right because it’s thinner. Could you tell me the model of the green weapon's plate and red dot?

Does that O Light on the G2C fit in a holster?

Can you let me know the name and model of the light and the optics for your g2c I have one and I like the set up

What mounting plate are you using for the Taurus?

What plate and red dot do u have on g2c and where did u get them???

What type of red dot do you have on the green one

I'm going to get the Taurus g3c to add to my Taurus collection. And I'm looking at green dot sights. Is the Dot always on or is there a switch?

@teamsankey560

3 жыл бұрын

I switch it on when I carry as opposed to leaving them on. I’ve heard mixed reviews about leaving the red/green dots on and the battery life so I decided to play it safe.

I recently picked a Taurus G2C and shot it for the first time today and it failed to shoot twice because it didn't push a bullet out of the mag up into the chamber.

@teamsankey560

2 жыл бұрын

Oh heck no. Sorry to hear that happened to you. Not saying The G2 series are the best but I’ve honestly haven’t had either of mine fail yet.

@zellwoodskunk

2 жыл бұрын

My first G2 Millennium had multiple "failure to feed" issues. It ended up being some cheap, steel core hollow tips that were given to me. Haven't had a single issue with any brass rounds.

Where did you get the plate for them? Asking bc I'm currently looking for one

@teamsankey560

3 жыл бұрын

Slimmer one from Galloway Precision and the other from Lakeline LLC. To assist, I’ve also put the links in the description.

Did u buy the red dot and plate on the green one from same place? If so where looks good

@teamsankey560

3 жыл бұрын

I just included all the links in the description to assist you guys.

What’s the plate on for the beige one ‼️‼️

How did the follow up go with Lakeline? I just purchased the Lakeline mount, the Galloway is out of stock. I wish I would have found your video first, but I would still be in the boat of waiting for Galloway to restock... Also, does the ADE RD3-006B fit the Lakeline mount? Trying to determine the best option for my EDC. Last question, what is your experience with the battery life with both red dots?

@teamsankey560

3 жыл бұрын

I decided not to pursue because if I was to receive the slimmer mounting plate then I would have a wide red dot on a slim mounting plate and I do not believe I’d feel that look either lol.

@teamsankey560

3 жыл бұрын

006B does fit the Lakeline Mounting Plate. Also I’m not sure of the battery life considering that I turn the 006B sight on when I leave the house and off when I return. I’ve waited a review with a brother stating that he has kept his 012 on for about a year and it hasn’t died. The two sights require two diff batteries though so that may play a big factor.

@uncle.lethal

3 жыл бұрын

@@teamsankey560 Mine should be in today, so I will see what it looks like. Expecting the same issue. The photos on their site do not show it over hanging that much. If it is significant like your plate, I will be requesting a return. thank you for your video and response.

I love Taurus I want to get the g2c little brother the g2s that holds A 10 round mag single stack

@kw2519

3 жыл бұрын

There’s a lot less magazine and holster options. The whole gun is actually a little thinner than the double stack. I personally don’t feel like the loss of ammunition is worth the 0.100” of width.

@caryames7668

3 жыл бұрын

My first EDC was the G2s I put the mag extensions on and had problems with the slide staying open on your last shot. Love the gun but I sold it to get my G3C.

Have you shot these with your sights on it?

Have you had a chance to upgrade the Recoil Spring & guide rod, also the Striker guide....? The Stock ones are made of Polymer but Lakeline makes Stainless steel versions of these parts. Upgrading these parts makes the absolute biggest difference to the G2C!

@teamsankey560

2 жыл бұрын

I have not as of yet but I plan on making the upgrade to both weapons here in the near future. I keep hearing about the modification so thank you for confirming that the upgrade does make a difference.

@treydaypnw

2 жыл бұрын

@Team Sankey no prob! Happy shooting!

Does the red dot and plates come together because the links doesn’t have the red dot. Just the mounting plates..

@teamsankey560

3 жыл бұрын

Thanks for pointing that out. I didn’t realize I didn’t include the links for the red dot and green dot. I’ll be sure to include the links this evening. I got the sights off of Amazon separately.

Did u loose ya load indicator when u put red dots on??

@teamsankey560

3 жыл бұрын

I did not. The sight stops before the load indicator.

What holsters do u have that fits with ya lights on?

@teamsankey560

3 жыл бұрын

I use the Skydas light bearing holster as shown in the video below. kzread.info/dash/bejne/pJ1lmLyAeLLVXbA.html

Great videos! However you need to speak louder in your videos. Like your style in your carry weapon vs your home weapon. Maybe use model numbers for those who want to use your style. Thanks bro!

@teamsankey560

2 жыл бұрын

Thank you for the positive advice.

Friend, could you tell me the name of this larger flashlight or the link to purchase ?? please

@teamsankey560

2 жыл бұрын

HiLight Bundle P5S 500 Lumen Sub-Compact Pistol LED Strobe Flashlight for with Weaver Quick Release, Bundled with x3 CR2 Batteries www.amazon.com/dp/B073ZKPYCR/ref=cm_sw_r_cp_api_glt_fabc_G0FSJA178ADRRA4E7JA8

Did u put ya red dots on ya self? Did u loose ya load indicator??

@ficobrosseau6709

5 ай бұрын

He completely misses this point

Did the plate slide in or did u have to use a clamp to secure fire arm and tap it in mine isn't very easy to mount gets stuck.

@teamsankey560

3 жыл бұрын

Although I didn’t use a clamp to secure it, I had to use a rubber hammer for the Lakeline mounting plate to get the plate to slide into the spot. It was not easy for me as well. The Galloway Precision mounting slid right in without much effort. Not saying one is better than the other but just stating my experience with installing both.

@savage_e8020

3 жыл бұрын

@@teamsankey560 thanks bro appreciate it

@teamsankey560

3 жыл бұрын

No problem. Let me know if you have any other questions. I’ll be uploading the holster video this evening if you are interested in that as well.

@savage_e8020

3 жыл бұрын

@@teamsankey560 alright thanks deff looking forward to some more content! Especially a holster option with the optic💯💯❗

Did u find a case for g2c with light on it???

@teamsankey560

3 жыл бұрын

kzread.info/dash/bejne/pJ1lmLyAeLLVXbA.html

How well do these sights hold zero? How many rounds do u have through each of them, and which would you reccomend ?

@teamsankey560

3 жыл бұрын

I have probably only out about 30-40 rounds through each and they have both held zero pretty well. I would recommend the green dot on the olive green G2C along with the less wide mounting plate (Galloway Precision).

@auschris9296

2 жыл бұрын

i have one and i have a few hundread rounds through mine, holds 0 fine use blue thread locker

@auschris9296

2 жыл бұрын

@@teamsankey560 i got the galloway optic mount plate for taurus millenium g2 and its as if my vortex venom dosent have enough adjustment to bring the dot down enough to be a true zero, idk if maybe the plate is defective or something?

With those black gloves it’s like watching a hitman talk about the guns he uses. Nice vid tho 💯

The reason that plate is wider is because you ordered it to fit that particular red dot they have a smaller red dot that fits on a smaller plate

@teamsankey560

3 жыл бұрын

Ah that makes sense. Thank you.

what if your sights die when u need them? u should get raised front sights, they can get a lil pricey tho

@teamsankey560

2 жыл бұрын

And I see exactly what you are talking about. Last time I took them to the range, they died on me just like you thought so thank you for the suggestion. Lol

@lilscoop11

2 жыл бұрын

@@teamsankey560 did you still try to use it without the dot? and if so was it accurate, I really like the way the plate fits on the sand colored one.

I like the slim one better

@teamsankey560

3 жыл бұрын

I do as well. I feel that it looks more natural to the weapon as opposed to it being an add on.

Question did you have to do any work to the other one like file it down

@teamsankey560

3 жыл бұрын

I haven’t had to file either weapon as of yet for any reason. I just took off the original rear sights and installed the mounting plates

@Lonestar-zn2ym

3 жыл бұрын

@@teamsankey560 my original one I had to sand it down. You are lucky

Man I hate that lake line are the only people that carries a plate for the th9c as well🤬 BTW, nice video, very entertaining…

@teamsankey560

2 жыл бұрын

Thanks for the positive feedback my brotha.

Thank you for this. Been going back and forth on Lakeline or Galloway. I just picked up a Solofish laser light combo for my G3 full size night stand weapon. (Slide doesn’t have the optic plate mount😢) With my g2c, I’ll give getting a light, the gallo plate and a Romeo zero optic

So why have a fiber optic front sight when you don’t have co witness? That front sight is kinda useless, isn’t it?

@teamsankey560

3 жыл бұрын

I had the fiber optic on prior to installing the rear sights. I got the rear sights shortly after watching someone else’s review on how it looked on theirs but you are right.

@kw2519

3 жыл бұрын

@@teamsankey560 ahhh, that makes sense. I just removed mine when I put the optic on. But that also requires taking out the barrel. Also, have you checked out keeptinkering.com? They sell a few different triggers. Just a guy making them from home with a 3D printer but they’re only like $30. I got his SAO trigger with an extended trigger face so I don’t crunch my meat hooks up haha.

The red dot on the green one where did you get it ?

@ldotwise22

3 жыл бұрын

I got both the green dot slimmer micro sight (ADE RD3 006B) and the wider micro red dot (ADE RD3 012) off of Amazon. The slimmer plate is from Galloway Precision and the wider plate is from Lakeline LLC. I was able to put the plates and the sights on myself. They didn’t affect the load indicator.

@kicksonkenny7781

3 жыл бұрын

After about a 100 rounds the sight will break.. the tiny screws on the side can’t hold up

Galloway plate is much nicer than Lakeline. I would not carry a weapon with an ADE optic. They auto shut off and if you need the weapon fast you will have a red dot that is off. I like the Fastfire 2. It never shuts off and has an auto brightness that works very well. Not really sure why you have a fiber optic front sight with a red dot, I assume you had fiber optic sights then went a red dot.

@teamsankey560

3 жыл бұрын

That is correct. I had the fiber optic on prior to adding the red dot but I may have to look into the Fastfire 2. That is my first time hearing of that sight.

@dougstout3663

3 жыл бұрын

Until recently I had a Vortex Venom on my Canik and ADE on everything else. I can't say the Vortex is really that much better than the ADE. I wanted to find a shake awake or an always on red dot with automatic brightness to carry and it seems the options are fastfire 2 or swampfox sentinal (at twice the price of the burris). I got a fastfire 2, and after using it a few months got 3 more to replace the ADE dots. I understand the fastfire 4 has an auto level mode but I don't think it's always on or shake awake. The fastfire 2 has an on/off slide switch on the side.

Have you had any issues with the Red Dot & Mounting Plate coming loose? I was told that its not a good idea to remove the rear sights & use a mounting plate since it's not meant for that.

These optic plates are really confusing me bro You got your G2C for a good price I paid over $300 for mine. Kicking myself Can you please post the optics you have in the comments.

@teamsankey560

3 жыл бұрын

How are you doing Joe Kelly? All of the optics and plates are located in the description of the video. Let me know if you still need help.

@losethegame1991

2 жыл бұрын

Paid 320 for mine. Hard to find online. Got it in OD Green like the one on the right in the video.

Yours is wider because it’s not the RMSC pattern

Forgot the audio dude

Be advised, dry slamming the slides like that can damage your pistols, also you speak as if they are two different pistols when in fact they are the same, sans the lights and sights. 🇺🇸

Could not hear a word you were saying

@ShotCallen23

3 жыл бұрын

Turn the volume up 😂

Bro how many times u gunna repeat yourself?…

Why are you talking so softly

Bro all you are talking about is that damn plate the difference between it, learn how to make a video

@teamsankey560

2 жыл бұрын

You could have easily exited the video at anytime if you didn’t like what you see. What’s the point of sticking around, being miserable, then putting some negative comment but thanks for the advice. I guess this is one of those lessons to myself where you can’t please everyone… even though the video is of THE PLATES and the optics.