Hi Will, Thank you for your review and your honest words, we continue working to improve in every way. Our pieces are all cut with laser but there was a run that came out with the sharpest edges, for a few weeks we have worked the edges of the pedals with various sandpaper and rollers. Also shortly we will have a product specially designed for people who use the pedals barefoot or with socks. Stay tuned. In addition to facilitating the assembly, we are including some washers like the ones you indicate that you have used to mount the flat base on your chassis. The community is very important to us and thanks to your words and comments we continue to improve. We are looking forward to you trying the load cell version. Back to work

@reviewforthetube6485

3 жыл бұрын

That's awesome wow don't see companies come out and respond and then go straight to working on those little things wow so amazing you guys just got a customer I'm literally going to buy some pedals from you tomorrow love companies like this and I become a lifetime supporter due to it lol

@danielschmidt1990

3 жыл бұрын

Are you working on changeable pedal plates? So every customer can change the look for their personal taste? - beside that im gonna buy the F1 set for sure

@reefsurfing3273

2 жыл бұрын

Will definitely be buying a set after seeing the video and you're comments on improving the little minor issues fantastic to see, 👏👍💗🇦🇺

@impulsemedia6675

2 жыл бұрын

I got mine this week, I was convinced by this review. Thanks Will. Sharing my feedback as well. The edges are sharp yeah, I got scraped when unscrewing the throttle bolts to adjust. The brake unit I got has a little play - I've adjusted input in software to compensate but thought mentioning here. I've only used the pedals a couple of times and I'm very happy with it overall. I've noticed the gain on consistency and pedal control right off the bat, which translated to consistent fast lap times. Only those 2 minor issues above.

@domenicofranco6246

2 жыл бұрын

@@impulsemedia6675 "The brake unit I got has a little play". this dosent sounds good. I was thinking to buy them but now dont know. did u email BJ and ask for a new one?. I dont like the idea to spend money for something that has problem

Great review Will. For anyone in the EU these are priced really good at the moment. I personally like that you have reviewed so many products in both the high end and low end market because it builds experience which allows you to compare products against each other. This adds massive value to your reviews.

Finally a proper review on these. Thank you so much!!

I was literally looking at them as this dropped.. nice work boosted media

Camera work is top notch. Excellent editing too. I wouldnt mind having those "cheap" pedals to replace my t3pa pro pedals 😅

50 minutes of Boosted media ! Nothing beats that on a Saturday night 😁

I think the raw uncovered mechanical look is beyond gorgeous

Great pedals, I have non hydravlic type. Sadly I was a bit dissapointed with them because 2 rubber rings on brake pedals BROKE mid race - I prefer stiffer setting. But then I wrote to manufacturer and received replacement parts within 4 days without complications and they put max effort to resolve this issue. Glad I bought them. Looking forward for you comparison between hydravlic and non hydravlic version.

Uve got your reviews down to a science. Excellent review as always!! Any chance of doing a high end pedal shootout in the future??

Great video I have just bought the non-hydraulic set of pedals that was a great video thank you Will

Great detailed review and I appreciate the balanced opinion, despite the affiliation. Would be very curious to see a head to head vs the Meca Cup1, since they are similar price point.

I just got my steel gt non hydraulic pedals from bj simracing last week and absolutely love them for that price of 460 € unbeatable in my opinion!! Love your new m2 comp by the way 👍🤙enjoy!

@amoll932

3 жыл бұрын

@@lor7780 when I ordered them there was a problem with the website and it didn't take my order so I contacted him 2 days later since I hadn't gotten a confirmation email from them but the payment through PayPal went through. He replied straight away and I had to tell him what I had ordered and give him my details! Guess al together 2 to 3 weeks or so!

I purchased the loadcell version of these, apart from them taking forever to be delivered from their factory in Spain to the UK I can say they are an absolute bargain. Awesome pedals for the money and no complaints so far.. £200 cheaper than the Heusinkveld Sprints and just as good if not better due to higher LC rating

@diegostalder9663

3 жыл бұрын

same here, delivery of pedals took more than a month. From Spain to Switzerland... including some back and forth with bj and transport agency. bj wasnt very responsive in the process...

@symonchester

3 жыл бұрын

I paid €35 for delivery but yes still high considering how long it took... but overall still an absolute bargain

@mrspangles932

2 жыл бұрын

Guys in the UK, may I ask if you had any extra charges?

@symonchester

2 жыл бұрын

@@mrspangles932 the purchase price on the site was without tax so you will be asked for 20% import tax by customs... Still a bargain imo... Mine are working flawlessly without issue

I have the Steel GT pedals from BJ Sim Racing and I really like them. Incredible bang for the buck!

@douglascruickshank6650

3 жыл бұрын

Is the break pedal really stiff ? Mines barely got any give at all

Look nice for the price. Around same price as a pair of sprints. If you want there sprint version it's about half the price of a pair of sprints. A very affordable and high quality product. F1 version too. Definitely peaked my interest.

looking forward for the comparation to the load cell version, almost decided for the load cell version, but after this i will wait a little bit more, and i will buy through your afiliation link ;)

I had some deadzone with these brake pedal. But you can adjust that easy. The support is excelent and they sent me a video how I can adjust the pedals that I have no more deadzone. You only have to loosen the nut on the pedal arm and then rotate the rod which is connected to the hydraulic (against clockwize I think). In this way you adjust the preload of the hydraulic. Now, I have no more deadzone like Will described.

No way! I’ve been waiting for someone to review the bj pedals. Do you plan on reviewing the regular load cell “steel” ones they offer?

Great video! I’d definitely like to see you check out the non Hydraulic version. That ones closer to my budget, well my future budget I’m saving up every spare penny I have to upgrade from my Logitech stuff lol.

@TheAndy009

3 жыл бұрын

I’m in the same position really wanting to upgrade from my g29 and am looking into the non hydraulic version of these pedals and their sequential shifter

Good review will. Just awaiting my order to turn up. Hopefully a nice step up from my sprint Loadcell pedals. Fingers crossed

@kezman82a

2 жыл бұрын

I maybe walk the same way. I do got the HE Sprints now. What so you say? Worth the upgrade? Or maybe go for VRS pedals?

@BadboyInc

2 жыл бұрын

@@kezman82a worth every penny, I love my BJ hydraulics pedals.they look and feel fantastic. I have not used the VRS pedals, are they loadcell?

@kezman82a

2 жыл бұрын

@@BadboyInc yes they are, not hydraulic.

@BadboyInc

2 жыл бұрын

@@kezman82a the vrs pedals look really nice. The hydraulic pedals are more expensive, now I have I will stick with them. So far I really enjoy.

They should have a washer or some sort of packer to add to the top of the master cylinder if you want to adjust the arm to pedal position.. anyway great review mate cheers

@D3VILRAC3R

3 жыл бұрын

While it probably isn't ideal. It doesn't actually matter. The rod is not directly connected to the piston and can pivot on the point it touches. Will is probably not quite right here

If possible try to review HPP JBV :) I think you are going to like those 🙌🏻 Thanks Will!!

Hi all! Great review! I got myself this set of pedals and the hydraulic brake is kinda squeaking in the very centr of the master cylinder (under the black cuff) when the pressure reachs a certain level... should the cuff be removed for lubing? Thanks all !

Great review thanks Will! I always debated wether I should go to hydraulics or not. I am looking to get that hydraulic feel I get in road cars on the brake pedal. Does anyone know if simracing hydraulic pedals properly replicate that feel or not that much?

Gday Boosted team i'm looking at an upgrade from my csl lc and living in Aus these in the lc version seem close to HE sprints price wise. Which ones would you choose with this in mind?

What happen to iRacing Calibration? I purchased the Hyd Pro and BJ Steel stated to view your video….but it is the same video that I viewed that helped me decided to make the purchase. In Texas….thanks Mark Ackerman West-Ackerman Racing

Top quality video production as always! Any observations by your brother after longer use?

@boostedmedia

2 жыл бұрын

We’ll do a follow up video soon. We’ve had multiple brake slave failures so far. Continuing to test.

@domenicofranco6246

2 жыл бұрын

@@boostedmedia "We’ve had multiple brake slave failures so far". I was thinking going buy them.hope the video come soon and BJ can fix it, if they didnt already.ty

Great review, thanks! I was wondering about your seat flex which seems pretty extreme at 21:40. Wouldn't it be better if there was no flex?

@boostedmedia

3 жыл бұрын

It’s the seat motion platform. Has some movement but you don’t really notice it when driving as it’s moving anyway. But yeah would be nice if it didn’t.

From the looks of it; if you need to adjust the ratio up and down (moving the connection between the pedal and the cylinder up/down) you could realign the axis of the cylinder by raising or lowering the front pivot of the pedal, no?

Imo this is all you need lol P.s. your open wheel is my favorite rim out right now and I mean out of any rims from any company anywhere haha

Hey, thanks just got these bad boys could I ask where you did your grounding wire with mounting??

Nice review ! They really look awesome for the price ! I have two question though : - did you try the pedal set on a formula style driving ? With short course and high pressure combinaison. If yes, how did it feel ? - at 46:49, on the slave cylinder closeup, it looks like there is a bit of black/green fluid at the connector, is this a visual effect or is there any fluid leak ? I heard you said you had not any leak, but from that perspective it looks so. Thanks again for your detailed review, you really make quality content, keep it up !

@boostedmedia

3 жыл бұрын

Yeah they feel good for formula driving. Can stiffen them up a bit if you prefer by increasing preload. No leaks. What you see is a bit of grease which seems to have been applied as part of the assembly process. It’s not the hydraulic fluid.

3 жыл бұрын

@@boostedmedia Thanks for your answer :) This is definitely a great choice I would make as I was lurking on the HK Ultimate. This BJs would match my style for less $. Thanks again !

@bjsimracing2.060

3 жыл бұрын

@ Thank you for your kind words, the green liquid you see is the glue used between the parts of the hydraulic circuit to prevent leaks and the parts from unscrewing.

3 жыл бұрын

@@bjsimracing2.060 thank you for this precision, this is really reassuring

Hi - I like the review and it gives a good overall impression, but I would like to know about the pressure which must be set on the brake pedal; is it smoother than a LC brake pedal? I have always been unsatisfied with the LC brake pedals and was looking for a brake pedal which is close to a real car brake or a balance beam brake which could be found in most (older) race cars or even in rallye cars ... any information on this would be helpful. Thanks in advance.

Hi Will, I know this video is quite old now but since you have started trying out drifting a little bit I thought would it be possible to get a quick view on what these would be like for drifting as I mainly drift and can’t find a good pedal set in Australia thank you for any input!

I'm very interested in these pedals, but what i could not find online is how to maintain these and how often.

I currently just use modded G27 pedals (with progressive spring) bolted on my P1X rig. I am always a bit afraid to buy this without being able to try it because it will be a massive difference. Also does somebody know how often you have to change that hydraulic fluid?

I'd like to see those pedals on my non racing rig setup and see if they work on my pedal skis setup

Love the videos and I think Barry has some competition for the quality of these reviews. The only criticism and apologies to anyone who'd not noticed this as you can't unhear it - is the amount of times the words "as well" gets used 😜. Keep up the good work.

@boostedmedia

3 жыл бұрын

Haha yep trying to break that habit!

@mactoUK

3 жыл бұрын

@@boostedmedia Haha no worries, love the content! I can live with it 😁

@camillechretien492

2 жыл бұрын

Oh man, I had never realized. But as soon as I read you, I heard his 'as well' clearly in my head 😂

@boostedmedia

2 жыл бұрын

🤣

Hi Will, i gave it a shot on Black friday, my Pedals are different (BRAKE) you can´t ajust the hydraulic hight anymore, it's on a fixed position. Also there are yellow nitroflex instead of the black damper. I haven't installed the pedals at the moment but what i can say that i have much more movement at the beginning, which i really don't like at all. After the movement it´s really stiff, but i don't like the way before, it's about a half cm of movement.

Hey Will, I sent you a mail a couple of weeks ago about some pedals. I know you are busy but do you think there'll be time some day in the future for the case? Thanks in advance and keep up your fantastic work mate!

Dope song!!

Hi So the dview lc calibration software doesn’t work in Iracing?

I still remember watching this 1 year ago. Now I have those pedals for almost a year and can say that Wills review pretty nailed it. The only negative thing I found out about those pedals is that the brake has become incredibly sticky. Feels like stutter braking. I put already teflon spray, wd 40 on it, air dusted it but it didn`t help. If anyone has a solution for that or the same problem please let me know. Many thanks. Cheers

Hi Will, Brit here. Just wondering, how long did it take you to get used to shifting with your right hand? It does break immersion for me slightly when I'm putting my hand through the door to change gear, but sheer patriotism is stopping me from moving it over. Well, that and muscle memory

Now the big question is: go for these or wait for the new VRSs... what a time to be alive!

@kezman82a

2 жыл бұрын

Wonder also, wich one have the most realistic brake feel.

The master cylinder adjustment holes look like an adjustment to get square shaft movement when dropping the whole pedal down

@boostedmedia

3 жыл бұрын

Yeah could well be. Either way it’s really important it stays square or it will fail.

@boothy.photography

3 жыл бұрын

@@boostedmedia yeh for sure would eventually punch the front seal out. Braid line should be standard for pedals using fluid, last thing ya want is brake fluid on the floor in ya race room

@bjsimracing2.060

3 жыл бұрын

@@boothy.photography Hello, Thank you for your interest in our pedals. We have never had any problem with our brake lines but if you want when you formalize your purchase tell us that you want a metal line (paying the difference) and without problem we will manufacture it for you. Best regards

What about these vs the OBP hydraulics? :)

Do these or VRS pedals have the best realistic brake pedal travel feel?

Question: Can you adjust the brake for more feeling... The rubbers on the BJ SIM and heusinkveld are to stiff for me. I need to apply to much pressure and don't have a good feeling how i brake.

@bjsimracing2.060

3 жыл бұрын

Hola, se pueden cambiar los eslastomeros y ademas tienes la opcion de Nitroflex, puedes mirar su instagram @Nitroflex_simracing Hello, you can change the elastomers and you also have the Nitroflex option, you can look at their instagram @Nitroflex_simracing

What mods are you using for the car and map on ac

If you change brake pedal height then wouldn't you also have to adjust the brake cylinder shaft height to match otherwise it would be at a angle ?

Good review as always!!! What pedals are better ?? heusinveld ultimate or SRP-GT ? I am a little desperate since I do not have a safe decision Thanks ;)

@boostedmedia

3 жыл бұрын

I prefer the ultimates to the SRPs personally. More adjustment available.

@kingm6128

3 жыл бұрын

@@boostedmedia Thank you very much, but for brake and throttle sensations, there is not one better than the other?

How much of a upgrade are these from v3's???

DI View isn't as scary as I initally thought. A couple of questions... Are the pedals recognised on Forza games on PC? Do they ship to the US? (I know. A bone headed question) Would inverting these cause any issues? It looks like it can be easily done. How stiff can I make the brake pedal for the loadcell version? Thank You Boosted Media for this review. I am leaning heavily towards these. If they work with Forza on PC, then these will replace my CSL-ELITE V1s.

Is the clutch a "Degressive clutch"? Really like these pedals but I love the feel of the clutch like it has an actual release and engage point on my Fanatec V3 inverted's... If these have that same engage/disengage feel then I'm sold!

@mathiasdfg

2 жыл бұрын

Yep, it's degressive.

I wonder if there is any significant difference between these, the sim jacks or simmsons

Hello Are the pedals better than the meca cup 1 ??

I like to see a review on the load cell version.

@Gino_567

3 жыл бұрын

they’re really good. Put about 100 hours on mine and haven’t had a single issue with them.

@clearaz2319

3 жыл бұрын

@@Gino_567 About how much pressure can you put on the brake pedal to max it out? They say they have a 200kg load cell but for example so do the HE ultimate but only measure up to 120kg. So do you have any approximation how much pressure the load cell BJ pedals take? Also can you change the rubbers to stiffer/lighter in the brake?

@Gino_567

3 жыл бұрын

@@clearaz2319 Can't give you a number because I don't know without looking at their specs. But I can tell you when I first got them, they were rock hard. I rang Pagnian imports up and asked them if there was anything I could do to soften them up more. They told me they would soften up over time - and they did. They're actually a bit too soft now. But I have the brake rod on it's medium setting atm so i'm gonna move it up a position to gain some hardness back. But having said that, they're still hard! I love a hard pedal. I wouldn't recommend them if they were a POS or had any issues but they're solid! They're well worth the price so go for it!

@clearaz2319

3 жыл бұрын

@@Gino_567 Alright, thank you for the info! I will highly consider them as my next set of pedals. Might still wait for the review by Boosted media first though. If they'll ever get them haha

After some use I’ve noticed quite significant wear on the cylindrical supports at the pivot where the spring/piston shaft meets the pedal arm (where the squeaky sound is coming from) after disassembling it to apply lubrication. It looks like it’s caused by the shaft pressing hard on to the support and damaging it. Are you guys seeing the same?

@boostedmedia

3 жыл бұрын

Not yet but we’ll keep an eye on it.

@racekraft

2 жыл бұрын

@@boostedmedia Hi, any updates on your pedals? I've since encountered instances the pedal's signals are 'stuck' even though my foot has changed the pedal position. After a moment, it jumps to the actually pedal position. Have you experienced that and were you able to fix it?

Is there any brand new wheel coming out soon for ps5 i dont like gt 29 wheel and I dont like thrustmasters either i hade both of them i returned it. They feel like shit😭

please tell me, i bought this hydraulic pedals, they are to strong. i want to change the elastomer, but i did not know how. the maunual are for the non hydraulic version only. i did not find a video for changing them.

Have you used the standard GT Series? Price looks good and theres a sale at the moment, really tempted

@insidefocus16

3 жыл бұрын

I have them. They're not too bad although not worth $1049. If they were to ever break like the hydraulics did for me TWICE! I'd never buy them again. I'd lean towards the HE Sprints for a little bit extra if you can afford it.

@Gino_567

3 жыл бұрын

they’re awesome mate. go for them!

hmmm... got my bj hydraulic pedals 2 days ago, coming from thrustmaster pedals. i must say, i am struggeling massively. i have great difficulties hitting that threshold point. i guess its me, but iam also not feeling this "threshold" point clearly when pressing the break. i dont know, im kind of disappointed... i also dont see a possibility to improve something by adjusting the pedal. only thing i can do is tighten the preload spring, but how could this help. the pedals came with 3 additional black "dampers". dont know what they are good for, i guess these are just replacement parts...

Which one do you use now?

Nice review Will. You compare them a lot with your Simtag, and you talk a lot about them being very smooth, but do you say at the same time that Simtag is not smooth? Can you elaborate on that, the smoothness feel, BJ vs Simtag?

@boostedmedia

3 жыл бұрын

The BJ brake is smoother than the Simtag at east in my experience. With the Simtag you get a slight underpinning texture which is present on most hydraulic pedals I’ve tested. Similar to a road car, the BJs feel more similar to HE Ultimates than any of the other hydraulic pedals I’ve tested. So it’s pretty much a personal preference thing.

@Adamdagoat233

3 жыл бұрын

@@boostedmedia , With blindfolds, and you had to choose between simtag and bj, so what would you choose? Ignore the price difference and sharp edges on the pedals (BJ) I it's subjective, I know it well, but I'm searching for the tiny little details that are hidden in it. These are some great investments if you go one way or the other, so it's great to be able to ask someone who has tried both. Thanks Will!

@boostedmedia

3 жыл бұрын

I still prefer the Simtags but not by much.

@kezman82a

2 жыл бұрын

@@boostedmedia do you mean the HE ultimates and BJ hydralic pedals feels closest to a real car brake pedal?

Are you gonna make a video about the winner of the 100k subscriber raffle?

@boostedmedia

3 жыл бұрын

When it’s drawn yes.

Hi. Do you think it is worth buying these hydraulic pedals today?

I was about to purchase HE sprints and this dropped. They’re both comparable price wise. Opinions on which way to go??

@insidefocus16

3 жыл бұрын

Sprints.

I have the bj pedals standard version which cost me 500 euro, the only confusing thing to me is, the brake are just like a brick its extremely hard, thats my only complaint, is there a way to make the brake less hard ? I suspect that the rubbers under the brake are just too hard, is it swappable to something softer maybi ?

@Gino_567

3 жыл бұрын

i had this same issue and was told the rubbers would soften up. And they did, alot! just keep using them.

How would you compare these to HE Sprints. I'm looking at these but wanting to know if the upgrade from sprints is worth the cash.

@boostedmedia

3 жыл бұрын

I’ve never used sprints. Sorry.

@barrymanon9459

3 жыл бұрын

How do they compare to the ultimates?

@boostedmedia

3 жыл бұрын

Quite similar overall. Better build quality in the ultimates. Honestly I think you’d be happy with either.

@jacobcisco7059

3 жыл бұрын

Just curious if you have ever had a go at the hpp prx se's Will....honestly from what i can see the ultimate's would be just as great as this pedal set and you could save a good few hundred dollars

@boostedmedia

3 жыл бұрын

No I haven’t.

Is this brake really stif ? I am a big guy and with my fanatec v3 at 100%brakeforce i max it out really easy in my f1 style seat. And i'm looking for a pedal set with the strongest brake force pedal there is .. the Heusinkvelds ultimate are 120kg real force but the price is a little bit high . Looking for a good set under a 1000euro's . This set looks promissing . But i wonna know if you can tell me if this brake pedal his max force detection is high enough ?

@boostedmedia

3 жыл бұрын

I don’t think you’ll have a problem there.

very good video, after the time you are using it have you noticed something strange? will you stay with them? I am going to update from the steel bj to the hydraulic bj this week, are a comparison if you want to go through my channel. a greeting

@boostedmedia

3 жыл бұрын

We’ll be posting an update this week :)

UK is not on the list?

How are you enjoying your new m2? Have you surpassed that Initial km quota?

@boostedmedia

3 жыл бұрын

Haven’t had much of a chance to drive it yet. Will be a few months before it’s run in most likely.

@thelorax7841

3 жыл бұрын

@@boostedmedia So what’s up with that, is there a monitored rpm ‘limit’ or is it electronically controlled till you run it in.

@boostedmedia

3 жыл бұрын

I believe so. I think it’s limited to 5500rpm. Haven’t tried to see if it will go higher. Lol

Hello Will, would you recommend those pedals against HE Sprint or Ultimate+ ?

@boostedmedia

2 жыл бұрын

No. We’ve had too many reliability issues. Go with HE

@TheMidg3

11 ай бұрын

​@@boostedmediawhat sort of reliability issues have you had? Was it just the elastomers blowing out, or is there other issues?

That brake piston does not look "square" on the factory setting.

@Mr_jz_12

3 жыл бұрын

Noticed that myself.

@boostedmedia

3 жыл бұрын

It’s not 100% square but it straightens as the pedal is pressed. Not ideal but we’ll see how it stands up to long term testing.

For a UK based purchaser: BJ STEEL GT HYDRAULIC or Meca Cup1?

@boostedmedia

3 жыл бұрын

We’ll be reviewing the Meca pedals soon

@malekalkshaik7243

3 жыл бұрын

@@boostedmedia Now that you’ve reviewed them, which do you think is better?

862 usd is a great price point for this pedal set.

If that mounting plate is steel Mr Will I've got an oylimpic weight lifting team that would like to talk to you. 💪 I'm going with aluminium plate.

@bjsimracing2.060

3 жыл бұрын

8mm Steel plate. 7kg

Nice vid Will, I was going to purchase this set through the website but I ended up never getting any responses back on an issue ordering, so I ended up going with the SRP-GT pedals after watching yours and Barry's reviews. Couldn't be happier, but these still look great!

The fluid isn't getting hot. I don't think you will get better results with the braided lines. It's a different story with road/track cars.

@boostedmedia

3 жыл бұрын

Incorrect. Braided lines stop ballooning which creates a spongy pedal feel regardless of fluid temperature. It’s pressure related.

@Donvatain

3 жыл бұрын

@@boostedmedia Thats not my point. I think the line is to short to feel a real difference and there are no other circumstances for a real spongy pedal. Also i didnt say that braided lines won't stop ballooning. They will for sure.

Of all the initials to put on it😂

100% functional, but they looks like 100% DIY project

Im doubting between these loadcell version of bj simracing and those of DCsimracing, both have the same price and look very alike, still trying to figuring out the difference between the two sets, your review on these do help get a pov on the build part and expected quality from bj simracing.

im not completely impressed by these. i spend my time drifting grass roots cars, and pedals in those cars arent stiff like a racecar. the brake pedal im looking for would have about 4-6 inches of travel, and i want to feel the hydraulic working through it all. the clutch's bite point would be broader, and spongy. i want to slip the clutch like i would in a real car, not having to skirt the tires at all when im leaving my pit area. anyone who cant slip the clutch in the pits IRL would most likely not be allowed back at the track.

No joke, when I accidentally kicked my cockpits metal base .. whiles playing ping pong and I cut open my foot and had to get it glued back together. some pieces are so sharp haha

Very nice pedal set, although I personally would not buy the load cell version as IMO the bracket that connects the load cell to the push rod is bend and prone to work hardening. ZerGut on grabcad has released DIY plans that have a way better design for the load cell placement. I drive those pedals daily. Very nice to see some more affordable pedals.

That Slave cylinder from Wilwood ... It's only a matter of time before it starts to leak. It only has a small rubber seal on the piston ... It is made for a clutch where the pressures are many times lower.

they sem more expensive in my country the Heusinkveld ultimate pedals seem cheaper here

This finish is really bad for this kind of price

@jacobcisco7059

3 жыл бұрын

Agreed..Felt this

That finish looks really lazy, just let someone file down the edges, that is 15min of work on each padal set max and i can't imagine this being a high volume product. These high priced pedal sets all look so similar, i feel like they copy/influence each other a lot. Most of the parts they use are commodity parts as well. So with the different pedal sets so close in function to each other, i'm suprised they put no effort into their software gui, it looks just really bad and unintuitive. For 900€ i would expect more effort into this, especially as a selling point, ease of use is nothing to forget about. I can't argue their performance, have not tried them.

@jacobcisco7059

3 жыл бұрын

Just my opinion....the price should be readjusted in the future..again just my silly opinion! Maybe around a grand..again idk what im talking about other than the 10 pedals i have tried from experience..and then linking that to his overall experience of these pedals.

@macht4turbo

3 жыл бұрын

@@jacobcisco7059 I have a hard time understanding the tone of you message tbh. In EU money, the pedal set is about a grand, do you mean australian dollar? The clutchless set is 780€, which is an easier price to swallow. The loadcell version without the clutch is 380€, which is certainly a good price. All of the models have the same build quality/finish however, so my assessment stands, you get the function of an expensive pedal set for the fit and finish of a cheaper pedal set. Everyone has different priorities.

@Gino_567

3 жыл бұрын

its not their software, its using software made by the company that supplies the load cell - which is Leo Bodnar. And there’s nothing wrong with it. Does exactly whats it supposed to do. literally takes 5-10 mins to calibrate and then you forget about it unless you want to tweak further. So why would they spend a ton of man hours and money on creating a gui that isn’t even needed? Dont agree with your point on the design either.. They’re primary purpose is to function properly for the price. if thats why they all look similar - because the design works, then whats wrong with that?

@jacobcisco7059

3 жыл бұрын

Oh wow soo that is a serious mistake on my part as i thought they were priced at around 1,700 dollars! To much work not enough sleep smh..i apologize for my meaningless message

@macht4turbo

3 жыл бұрын

@@Gino_567 My point is that it is the same product over and over again with minimal differences, the market is saturated. These willwood brake cylinders are cheap as chips btw, 60€ retail. A simple gui for so few functions does not take a ton of man hours. There is nothing that differentiates this product from other pedal sets, i just think it is lazy design. Even Will mentions that he wasn't excited to review the product.

Hello Are the pedals better than the meca cup 1 ??

hmmm... got my bj hydraulic pedals 2 days ago, coming from thrustmaster pedals. i must say, i am struggeling massively. i have great difficulties hitting that threshold point. i guess its me, but iam also not feeling this "threshold" point clearly when pressing the break. i dont know, im kind of disappointed... i also dont see a possibility to improve something by adjusting the pedal. only thing i can do is tighten the preload spring, but how could this help. the pedals came with 3 additional black "dampers". dont know what they are good for, i guess these are just replacement parts...